Commit 2aa5cf9e authored by Gavin Shan's avatar Gavin Shan Committed by Michael Ellerman

powerpc/eeh: Fix missed PE#0 on P7IOC

PE#0 should be regarded as valid for P7IOC, while it's invalid for
PHB3. The patch adds flag EEH_VALID_PE_ZERO to differentiate those
two cases. Without the patch, we possibly see frozen PE#0 state is
cleared without EEH recovery taken on P7IOC as following kernel logs
indicate:

[root@ltcfbl8eb ~]# dmesg
       :
pci 0000:00     : [PE# 000] Secondary bus 0 associated with PE#0
pci 0000:01     : [PE# 001] Secondary bus 1 associated with PE#1
pci 0001:00     : [PE# 000] Secondary bus 0 associated with PE#0
pci 0001:01     : [PE# 001] Secondary bus 1 associated with PE#1
pci 0002:00     : [PE# 000] Secondary bus 0 associated with PE#0
pci 0002:01     : [PE# 001] Secondary bus 1 associated with PE#1
pci 0003:00     : [PE# 000] Secondary bus 0 associated with PE#0
pci 0003:01     : [PE# 001] Secondary bus 1 associated with PE#1
pci 0003:20     : [PE# 002] Secondary bus 32..63 associated with PE#2
       :
EEH: Clear non-existing PHB#3-PE#0
EEH: PHB location: U78AE.001.WZS00M9-P1-002
Signed-off-by: default avatarGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent 6f20e7f2
......@@ -38,8 +38,9 @@ struct device_node;
#define EEH_FORCE_DISABLED 0x02 /* EEH disabled */
#define EEH_PROBE_MODE_DEV 0x04 /* From PCI device */
#define EEH_PROBE_MODE_DEVTREE 0x08 /* From device tree */
#define EEH_ENABLE_IO_FOR_LOG 0x10 /* Enable IO for log */
#define EEH_EARLY_DUMP_LOG 0x20 /* Dump log immediately */
#define EEH_VALID_PE_ZERO 0x10 /* PE#0 is valid */
#define EEH_ENABLE_IO_FOR_LOG 0x20 /* Enable IO for log */
#define EEH_EARLY_DUMP_LOG 0x40 /* Dump log immediately */
/*
* Delay for PE reset, all in ms
......
......@@ -239,10 +239,18 @@ static void *__eeh_pe_get(void *data, void *flag)
if (pe->type & EEH_PE_PHB)
return NULL;
/* We prefer PE address */
if (edev->pe_config_addr &&
(edev->pe_config_addr == pe->addr))
/*
* We prefer PE address. For most cases, we should
* have non-zero PE address
*/
if (eeh_has_flag(EEH_VALID_PE_ZERO)) {
if (edev->pe_config_addr == pe->addr)
return pe;
} else {
if (edev->pe_config_addr &&
(edev->pe_config_addr == pe->addr))
return pe;
}
/* Try BDF address */
if (edev->config_addr &&
......
......@@ -68,6 +68,17 @@ static int powernv_eeh_init(void)
if (phb->model == PNV_PHB_MODEL_P7IOC)
eeh_add_flag(EEH_ENABLE_IO_FOR_LOG);
/*
* PE#0 should be regarded as valid by EEH core
* if it's not the reserved one. Currently, we
* have the reserved PE#0 and PE#127 for PHB3
* and P7IOC separately. So we should regard
* PE#0 as valid for P7IOC.
*/
if (phb->ioda.reserved_pe != 0)
eeh_add_flag(EEH_VALID_PE_ZERO);
break;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment