Commit 2aee82de authored by Denys Vlasenko's avatar Denys Vlasenko Committed by John W. Linville

wavelan_cs: stop inlining largish static functions

Hi John,

Can you please take a look at this patch?

drivers/net/wireless/wavelan_cs.c has unusually large number
of static inline functions - 27.

I looked through them and 20 of them do not seem to warrant inlining.
Some are really big; others call mdelay(1) or busy-wait for a bit
to be set in a hardware register - it's pointless
to optimize such functions for speed.

This patch removes "inline" from these static function
(regardless of number of callsites - gcc nowadays auto-inlines
statics with one callsite).

Size difference for 32bit x86:

   text    data     bss     dec     hex filename
  17020     372       8   17400    43f8 linux-2.6-ALLYES/drivers/net/wireless/wavelan_cs.o
  14032     356       8   14396    383c linux-2.6.inline-ALLYES/drivers/net/wireless/wavelan_cs.o
Signed-off-by: default avatarDenys Vlasenko <vda.linux@googlemail.com>
--
vda
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 7b463ced
......@@ -102,7 +102,7 @@ hacr_write(u_long base,
* Write to card's Host Adapter Command Register. Include a delay for
* those times when it is needed.
*/
static inline void
static void
hacr_write_slow(u_long base,
u_char hacr)
{
......@@ -255,7 +255,7 @@ update_psa_checksum(struct net_device * dev)
/*
* Write 1 byte to the MMC.
*/
static inline void
static void
mmc_out(u_long base,
u_short o,
u_char d)
......@@ -275,7 +275,7 @@ mmc_out(u_long base,
* Routine to write bytes to the Modem Management Controller.
* We start by the end because it is the way it should be !
*/
static inline void
static void
mmc_write(u_long base,
u_char o,
u_char * b,
......@@ -293,7 +293,7 @@ mmc_write(u_long base,
* Read 1 byte from the MMC.
* Optimised version for 1 byte, avoid using memory...
*/
static inline u_char
static u_char
mmc_in(u_long base,
u_short o)
{
......@@ -318,7 +318,7 @@ mmc_in(u_long base,
* (code has just been moved in the above function)
* We start by the end because it is the way it should be !
*/
static inline void
static void
mmc_read(u_long base,
u_char o,
u_char * b,
......@@ -350,9 +350,8 @@ mmc_encr(u_long base) /* i/o port of the card */
/*------------------------------------------------------------------*/
/*
* Wait for the frequency EEprom to complete a command...
* I hope this one will be optimally inlined...
*/
static inline void
static void
fee_wait(u_long base, /* i/o port of the card */
int delay, /* Base delay to wait for */
int number) /* Number of time to wait */
......@@ -738,9 +737,9 @@ static void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp)
}
/* Called when a WavePoint beacon is received */
static inline void wl_roam_gather(struct net_device * dev,
u_char * hdr, /* Beacon header */
u_char * stats) /* SNR, Signal quality
static void wl_roam_gather(struct net_device * dev,
u_char * hdr, /* Beacon header */
u_char * stats) /* SNR, Signal quality
of packet */
{
wavepoint_beacon *beacon= (wavepoint_beacon *)hdr; /* Rcvd. Beacon */
......@@ -794,7 +793,7 @@ static inline void wl_roam_gather(struct net_device * dev,
static inline int WAVELAN_BEACON(unsigned char *data)
{
wavepoint_beacon *beacon= (wavepoint_beacon *)data;
static wavepoint_beacon beacon_template={0xaa,0xaa,0x03,0x08,0x00,0x0e,0x20,0x03,0x00};
static const wavepoint_beacon beacon_template={0xaa,0xaa,0x03,0x08,0x00,0x0e,0x20,0x03,0x00};
if(memcmp(beacon,&beacon_template,9)==0)
return 1;
......@@ -980,7 +979,7 @@ read_ringbuf(struct net_device * dev,
* wavelan_interrupt is not an option...), so you may experience
* some delay sometime...
*/
static inline void
static void
wv_82593_reconfig(struct net_device * dev)
{
net_local * lp = netdev_priv(dev);
......@@ -1233,7 +1232,7 @@ wv_local_show(struct net_device * dev)
/*
* Dump packet header (and content if necessary) on the screen
*/
static inline void
static void
wv_packet_info(u_char * p, /* Packet to dump */
int length, /* Length of the packet */
char * msg1, /* Name of the device */
......@@ -1272,7 +1271,7 @@ wv_packet_info(u_char * p, /* Packet to dump */
* This is the information which is displayed by the driver at startup
* There is a lot of flag to configure it at your will...
*/
static inline void
static void
wv_init_info(struct net_device * dev)
{
unsigned int base = dev->base_addr;
......@@ -1509,7 +1508,7 @@ wavelan_set_mac_address(struct net_device * dev,
* Frequency setting (for hardware able of it)
* It's a bit complicated and you don't really want to look into it...
*/
static inline int
static int
wv_set_frequency(u_long base, /* i/o port of the card */
iw_freq * frequency)
{
......@@ -1706,7 +1705,7 @@ wv_set_frequency(u_long base, /* i/o port of the card */
/*
* Give the list of available frequencies
*/
static inline int
static int
wv_frequency_list(u_long base, /* i/o port of the card */
iw_freq * list, /* List of frequency to fill */
int max) /* Maximum number of frequencies */
......@@ -2759,7 +2758,7 @@ wavelan_get_wireless_stats(struct net_device * dev)
* frame pointer and verify that the frame seem correct
* (called by wv_packet_rcv())
*/
static inline int
static int
wv_start_of_frame(struct net_device * dev,
int rfp, /* end of frame */
int wrap) /* start of buffer */
......@@ -2821,7 +2820,7 @@ wv_start_of_frame(struct net_device * dev,
* Note: if any errors occur, the packet is "dropped on the floor"
* (called by wv_packet_rcv())
*/
static inline void
static void
wv_packet_read(struct net_device * dev,
int fd_p,
int sksize)
......@@ -2922,7 +2921,7 @@ wv_packet_read(struct net_device * dev,
* (called by wavelan_interrupt())
* Note : the spinlock is already grabbed for us and irq are disabled.
*/
static inline void
static void
wv_packet_rcv(struct net_device * dev)
{
unsigned int base = dev->base_addr;
......@@ -3056,7 +3055,7 @@ wv_packet_rcv(struct net_device * dev)
* the transmit.
* (called in wavelan_packet_xmit())
*/
static inline void
static void
wv_packet_write(struct net_device * dev,
void * buf,
short length)
......@@ -3180,7 +3179,7 @@ wavelan_packet_xmit(struct sk_buff * skb,
* Routine to initialize the Modem Management Controller.
* (called by wv_hw_config())
*/
static inline int
static int
wv_mmc_init(struct net_device * dev)
{
unsigned int base = dev->base_addr;
......@@ -3699,7 +3698,7 @@ wv_82593_config(struct net_device * dev)
* wavelan.
* (called by wv_config())
*/
static inline int
static int
wv_pcmcia_reset(struct net_device * dev)
{
int i;
......@@ -3864,7 +3863,7 @@ wv_hw_config(struct net_device * dev)
* 2. Start the LAN controller's receive unit
* (called by wavelan_event(), wavelan_watchdog() and wavelan_open())
*/
static inline void
static void
wv_hw_reset(struct net_device * dev)
{
net_local * lp = netdev_priv(dev);
......@@ -3895,7 +3894,7 @@ wv_hw_reset(struct net_device * dev)
* device available to the system.
* (called by wavelan_event())
*/
static inline int
static int
wv_pcmcia_config(struct pcmcia_device * link)
{
struct net_device * dev = (struct net_device *) link->priv;
......
......@@ -637,7 +637,7 @@ struct net_local
/* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */
static inline u_char /* data */
hasr_read(u_long); /* Read the host interface : base address */
static inline void
static void
hacr_write(u_long, /* Write to host interface : base address */
u_char), /* data */
hacr_write_slow(u_long,
......@@ -651,7 +651,7 @@ static void
int, /* Offset in psa */
u_char *, /* Buffer in memory */
int); /* Length of buffer */
static inline void
static void
mmc_out(u_long, /* Write 1 byte to the Modem Manag Control */
u_short,
u_char),
......@@ -659,10 +659,10 @@ static inline void
u_char,
u_char *,
int);
static inline u_char /* Read 1 byte from the MMC */
static u_char /* Read 1 byte from the MMC */
mmc_in(u_long,
u_short);
static inline void
static void
mmc_read(u_long, /* Read n bytes from the MMC */
u_char,
u_char *,
......@@ -688,10 +688,10 @@ static int
int,
char *,
int);
static inline void
static void
wv_82593_reconfig(struct net_device *); /* Reconfigure the controller */
/* ------------------- DEBUG & INFO SUBROUTINES ------------------- */
static inline void
static void
wv_init_info(struct net_device *); /* display startup info */
/* ------------------- IOCTL, STATS & RECONFIG ------------------- */
static en_stats *
......@@ -699,17 +699,17 @@ static en_stats *
static iw_stats *
wavelan_get_wireless_stats(struct net_device *);
/* ----------------------- PACKET RECEPTION ----------------------- */
static inline int
static int
wv_start_of_frame(struct net_device *, /* Seek beggining of current frame */
int, /* end of frame */
int); /* start of buffer */
static inline void
static void
wv_packet_read(struct net_device *, /* Read a packet from a frame */
int,
int),
wv_packet_rcv(struct net_device *); /* Read all packets waiting */
/* --------------------- PACKET TRANSMISSION --------------------- */
static inline void
static void
wv_packet_write(struct net_device *, /* Write a packet to the Tx buffer */
void *,
short);
......@@ -717,20 +717,20 @@ static int
wavelan_packet_xmit(struct sk_buff *, /* Send a packet */
struct net_device *);
/* -------------------- HARDWARE CONFIGURATION -------------------- */
static inline int
static int
wv_mmc_init(struct net_device *); /* Initialize the modem */
static int
wv_ru_stop(struct net_device *), /* Stop the i82593 receiver unit */
wv_ru_start(struct net_device *); /* Start the i82593 receiver unit */
static int
wv_82593_config(struct net_device *); /* Configure the i82593 */
static inline int
static int
wv_pcmcia_reset(struct net_device *); /* Reset the pcmcia interface */
static int
wv_hw_config(struct net_device *); /* Reset & configure the whole hardware */
static inline void
static void
wv_hw_reset(struct net_device *); /* Same, + start receiver unit */
static inline int
static int
wv_pcmcia_config(struct pcmcia_device *); /* Configure the pcmcia interface */
static void
wv_pcmcia_release(struct pcmcia_device *);/* Remove a device */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment