staging: rtl8192e: Remove ifdefs that depend on ENABLE_DOT11D

This configuration parameter is selected in the Makefile, thus the
conditional code can be removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

drivers/staging/rtl8192e/Makefile

@@ -2,7 +2,6 @@ ccflags-y += -DEEPROM_OLD_FORMAT_SUPPORT=1
 ccflags-y += -DUSE_FW_SOURCE_IMG_FILE
 ccflags-y += -DCONFIG_PM_RTL
 ccflags-y += -DCONFIG_PM
-ccflags-y += -DENABLE_DOT11D
 ccflags-y += -DHAVE_NET_DEVICE_OPS
 ccflags-y += -DENABLE_DOT11D
 

drivers/staging/rtl8192e/r8192E_dev.c

@@ -609,9 +609,7 @@ static void rtl8192_read_eeprom_info(struct net_device* dev)
 
 	if (priv->ChannelPlan > CHANNEL_PLAN_LEN - 1)
 		priv->ChannelPlan = 0;
-#ifdef ENABLE_DOT11D
 	priv->ChannelPlan = COUNTRY_CODE_WORLD_WIDE_13;
-#endif
 
 	if ( priv->eeprom_vid == 0x1186 &&  priv->eeprom_did == 0x3304)
 		priv->rtllib->bSupportRemoteWakeUp = true;

drivers/staging/rtl8192e/r8192E_phy.c

@@ -23,9 +23,7 @@
 #include "r8190P_rtl8256.h"
 #include "r8192E_phy.h"
 #include "rtl_dm.h"
-#ifdef ENABLE_DOT11D
 #include "dot11d.h"
-#endif
 
 #include "r8192E_hwimg.h"
 
@@ -871,13 +869,11 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* stage, u
 
 	RT_TRACE(COMP_TRACE, "====>%s()====stage:%d, step:%d, channel:%d\n", __func__, *stage, *step, channel);
 
-#ifdef ENABLE_DOT11D
 	if (!IsLegalChannel(priv->rtllib, channel))
 	{
 		RT_TRACE(COMP_ERR, "=============>set to illegal channel:%d\n", channel);
 		return true;
 	}
-#endif
 
 	{
 		PreCommonCmdCnt = 0;

drivers/staging/rtl8192e/rtl_core.c

@@ -1347,7 +1347,6 @@ short rtl8192_get_channel_map(struct net_device * dev)
 {
 	int i;
 
-#ifdef ENABLE_DOT11D
 	struct r8192_priv *priv = rtllib_priv(dev);
 	if ((priv->rf_chip != RF_8225) && (priv->rf_chip != RF_8256)
 			&& (priv->rf_chip != RF_6052)) {
@@ -1363,23 +1362,6 @@ short rtl8192_get_channel_map(struct net_device * dev)
 	Dot11d_Init(priv->rtllib);
 #ifndef CONFIG_CRDA
 	Dot11d_Channelmap(priv->ChannelPlan, priv->rtllib);
-#endif
-#else
-	struct r8192_priv *priv = rtllib_priv(dev);
-	int ch;
-	if (!channels){
-		DMESG("No channels, aborting");
-		return -1;
-	}
-
-	ch = channels;
-	priv->ChannelPlan = 0;
-	for (i = 1; i <= 14; i++) {
-		(priv->rtllib->channel_map)[i] = (u8)(ch & 0x01);
-		ch >>= 1;
-	}
-	priv->rtllib->IbssStartChnl= 10;
-	priv->rtllib->ibss_maxjoin_chal = 11;
 #endif
 	for (i = 1; i <= 11; i++) {
 		(priv->rtllib->active_channel_map)[i] = 1;

drivers/staging/rtl8192e/rtl_core.h

@@ -48,9 +48,7 @@
 #include <asm/io.h>
 #include "rtllib.h"
 
-#ifdef ENABLE_DOT11D
 #include "dot11d.h"
-#endif
 
 #include "r8192E_firmware.h"
 #include "r8192E_hw.h"

drivers/staging/rtl8192e/rtl_wx.c

@@ -19,9 +19,7 @@
 
 #include <linux/string.h>
 #include "rtl_core.h"
-#ifdef ENABLE_DOT11D
 #include "dot11d.h"
-#endif
 
 #define RATE_COUNT 12
 u32 rtl8192_rates[] = {1000000,2000000,5500000,11000000,

drivers/staging/rtl8192e/rtllib.h

@@ -1741,10 +1741,8 @@ struct rtllib_network {
         u8 wmm_info;
         struct rtllib_wmm_ac_param wmm_param[4];
 	u8 Turbo_Enable;
-#ifdef ENABLE_DOT11D
 	u16 CountryIeLen;
 	u8 CountryIeBuf[MAX_IE_LEN];
-#endif
 	BSS_HT	bssht;
 	bool broadcom_cap_exist;
 	bool realtek_cap_exit;
@@ -2485,12 +2483,8 @@ struct rtllib_device {
         u16 prev_seq_ctl;       /* used to drop duplicate frames */
 
 	/* map of allowed channels. 0 is dummy */
-#ifdef ENABLE_DOT11D
 	void* pDot11dInfo;
 	bool bGlobalDomain;
-#else
-	u8 channel_map[MAX_CHANNEL_NUMBER+1];
-#endif
 	u8 active_channel_map[MAX_CHANNEL_NUMBER+1];
 
 	u8   IbssStartChnl;

drivers/staging/rtl8192e/rtllib_rx.c

@@ -43,9 +43,7 @@
 #include <linux/ctype.h>
 
 #include "rtllib.h"
-#ifdef ENABLE_DOT11D
 #include "dot11d.h"
-#endif
 
 #if defined CONFIG_CFG_80211
 #include <linux/crc32.h>
@@ -2074,7 +2072,6 @@ static const char *get_info_element_string(u16 id)
 }
 #endif
 
-#ifdef ENABLE_DOT11D
 static inline void rtllib_extract_country_ie(
 	struct rtllib_device *ieee,
 	struct rtllib_info_element *info_element,
@@ -2100,7 +2097,6 @@ static inline void rtllib_extract_country_ie(
 	}
 
 }
-#endif
 
 int rtllib_parse_info_param(struct rtllib_device *ieee,
 		struct rtllib_info_element *info_element,
@@ -2574,13 +2570,11 @@ int rtllib_parse_info_param(struct rtllib_device *ieee,
 			       "QoS Error need to parse QOS_PARAMETER IE\n");
 			break;
 
-#ifdef ENABLE_DOT11D
 		case MFIE_TYPE_COUNTRY:
 			RTLLIB_DEBUG_SCAN("MFIE_TYPE_COUNTRY: %d bytes\n",
 					     info_element->len);
 			rtllib_extract_country_ie(ieee, info_element, network, network->bssid);
 			break;
-#endif
 /* TODO */
 		default:
 			RTLLIB_DEBUG_MGMT
@@ -2717,10 +2711,8 @@ static inline int rtllib_network_init(
 	network->Turbo_Enable = 0;
 	network->SignalStrength = stats->SignalStrength;
 	network->RSSI = stats->SignalStrength;
-#ifdef ENABLE_DOT11D
 	network->CountryIeLen = 0;
 	memset(network->CountryIeBuf, 0, MAX_IE_LEN);
-#endif
 	HTInitializeBssDesc(&network->bssht);
 	if (stats->freq == RTLLIB_52GHZ_BAND) {
 		/* for A band (No DS info) */
@@ -2898,10 +2890,8 @@ static inline void update_network(struct rtllib_network *dst,
 	dst->RSSI = src->RSSI;
 	dst->Turbo_Enable = src->Turbo_Enable;
 
-#ifdef ENABLE_DOT11D
 	dst->CountryIeLen = src->CountryIeLen;
 	memcpy(dst->CountryIeBuf, src->CountryIeBuf, src->CountryIeLen);
-#endif
 
 	dst->bWithAironetIE = src->bWithAironetIE;
 	dst->bCkipSupported = src->bCkipSupported;

drivers/staging/rtl8192e/rtllib_softmac.c

@@ -21,9 +21,7 @@
 #include <linux/delay.h>
 #include <linux/version.h>
 #include <asm/uaccess.h>
-#ifdef ENABLE_DOT11D
 #include "dot11d.h"
-#endif
 
 #ifdef RTK_DMP_PLATFORM
 #include <linux/usb_setting.h>
@@ -549,11 +547,7 @@ void rtllib_softmac_hint11d_wq(void *data)
 
 void rtllib_update_active_chan_map(struct rtllib_device *ieee)
 {
-#ifdef ENABLE_DOT11D
 	memcpy(ieee->active_channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
-#else
-	memcpy(ieee->active_channel_map, ieee->channel_map, MAX_CHANNEL_NUMBER+1);
-#endif
 }
 
 /* this performs syncro scan blocking the caller until all channels
@@ -618,10 +612,8 @@ void rtllib_softmac_scan_syncro(struct rtllib_device *ieee, u8 is_mesh)
 	ieee->sync_scan_hurryup = 0;
 
 	if (ieee->state >= RTLLIB_LINKED){
-#ifdef ENABLE_DOT11D
 		if (IS_DOT11D_ENABLE(ieee))
 			DOT11D_ScanComplete(ieee);
-#endif
 	}
 	up(&ieee->scan_sem);
 
@@ -681,10 +673,8 @@ void rtllib_softmac_scan_wq(void *data)
 	return;
 
 out:
-#ifdef ENABLE_DOT11D
 	if (IS_DOT11D_ENABLE(ieee))
 		DOT11D_ScanComplete(ieee);
-#endif
 	ieee->current_network.channel = last_channel;
 
 out1:
@@ -794,7 +784,6 @@ void rtllib_start_scan(struct rtllib_device *ieee)
 	ieee->rtllib_ips_leave_wq(ieee->dev);
 
 
-#ifdef ENABLE_DOT11D
 	if (IS_DOT11D_ENABLE(ieee) )
 	{
 		if (IS_COUNTRY_IE_VALID(ieee))
@@ -802,7 +791,6 @@ void rtllib_start_scan(struct rtllib_device *ieee)
 			RESET_CIE_WATCHDOG(ieee);
 		}
 	}
-#endif
 	if (ieee->softmac_features & IEEE_SOFTMAC_SCAN) {
 		if (ieee->scanning_continue == 0) {
 			ieee->actscanning = true;
@@ -819,7 +807,6 @@ void rtllib_start_scan(struct rtllib_device *ieee)
 /* called with wx_sem held */
 void rtllib_start_scan_syncro(struct rtllib_device *ieee, u8 is_mesh)
 {
-#ifdef ENABLE_DOT11D
 	if (IS_DOT11D_ENABLE(ieee) )
 	{
 		if (IS_COUNTRY_IE_VALID(ieee))
@@ -827,7 +814,6 @@ void rtllib_start_scan_syncro(struct rtllib_device *ieee, u8 is_mesh)
 			RESET_CIE_WATCHDOG(ieee);
 		}
 	}
-#endif
 	ieee->sync_scan_hurryup = 0;
 	if (ieee->softmac_features & IEEE_SOFTMAC_SCAN){
 		rtllib_softmac_scan_syncro(ieee, is_mesh);
@@ -2935,7 +2921,6 @@ inline void rtllib_start_ibss(struct rtllib_device *ieee)
 void rtllib_start_bss(struct rtllib_device *ieee)
 {
 	unsigned long flags;
-#ifdef ENABLE_DOT11D
 	if (IS_DOT11D_ENABLE(ieee) && !IS_COUNTRY_IE_VALID(ieee))
 	{
 		if (! ieee->bGlobalDomain)
@@ -2943,7 +2928,6 @@ void rtllib_start_bss(struct rtllib_device *ieee)
 			return;
 		}
 	}
-#endif
 	/* check if we have already found the net we
 	 * are interested in (if any).
 	 * if not (we are disassociated and we are not
@@ -2980,10 +2964,8 @@ void rtllib_disassociate(struct rtllib_device *ieee)
 
 	if (ieee->data_hard_stop)
 			ieee->data_hard_stop(ieee->dev);
-#ifdef ENABLE_DOT11D
 	if (IS_DOT11D_ENABLE(ieee))
 		Dot11d_Reset(ieee);
-#endif
 	ieee->state = RTLLIB_NOLINK;
 	ieee->is_set_key = false;
 	ieee->wap_set = 0;
@@ -3200,12 +3182,10 @@ void rtllib_softmac_init(struct rtllib_device *ieee)
 	for (i = 0; i < 5; i++) {
 	  ieee->seq_ctrl[i] = 0;
 	}
-#ifdef ENABLE_DOT11D
 	ieee->pDot11dInfo = kmalloc(sizeof(struct rt_dot11d_info), GFP_ATOMIC);
 	if (!ieee->pDot11dInfo)
 		RTLLIB_DEBUG(RTLLIB_DL_ERR, "can't alloc memory for DOT11D\n");
 	memset(ieee->pDot11dInfo, 0, sizeof(struct rt_dot11d_info));
-#endif
 	ieee->LinkDetectInfo.SlotIndex = 0;
 	ieee->LinkDetectInfo.SlotNum = 2;
 	ieee->LinkDetectInfo.NumRecvBcnInPeriod=0;
@@ -3285,13 +3265,11 @@ void rtllib_softmac_init(struct rtllib_device *ieee)
 void rtllib_softmac_free(struct rtllib_device *ieee)
 {
 	down(&ieee->wx_sem);
-#ifdef ENABLE_DOT11D
 	if (NULL != ieee->pDot11dInfo)
 	{
 		kfree(ieee->pDot11dInfo);
 		ieee->pDot11dInfo = NULL;
 	}
-#endif
 	del_timer_sync(&ieee->associate_timer);
 
 	cancel_delayed_work(&ieee->associate_retry_wq);

drivers/staging/rtl8192e/rtllib_softmac_wx.c

@@ -16,9 +16,7 @@
 
 #include "rtllib.h"
 #include "rtl_core.h"
-#ifdef ENABLE_DOT11D
 #include "dot11d.h"
-#endif
 /* FIXME: add A freqs */
 
 const long rtllib_wlan_frequencies[] = {
@@ -64,12 +62,10 @@ int rtllib_wx_set_freq(struct rtllib_device *ieee, struct iw_request_info *a,
 
 	}else { /* Set the channel */
 
-#ifdef ENABLE_DOT11D
 		if (ieee->active_channel_map[fwrq->m] != 1) {
 			ret = -EINVAL;
 			goto out;
 		}
-#endif
 		ieee->current_network.channel = fwrq->m;
 		ieee->set_chan(ieee->dev, ieee->current_network.channel);