usb: Remove unnecessary semicolons

These aren't necessary after switch and if blocks.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/core/hub.c

@@ -438,7 +438,7 @@ static void set_port_led(
 			case HUB_LED_OFF: s = "off"; break;
 			case HUB_LED_AUTO: s = "auto"; break;
 			default: s = "??"; break;
-			}; s; }),
+			} s; }),
 			status);
 }
 

drivers/usb/dwc3/ep0.c

@@ -352,7 +352,7 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc,
 		break;
 	default:
 		return -EINVAL;
-	};
+	}
 
 	response_pkt = (__le16 *) dwc->setup_buf;
 	*response_pkt = cpu_to_le16(usb_status);
@@ -470,7 +470,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
 
 	default:
 		return -EINVAL;
-	};
+	}
 
 	return 0;
 }
@@ -709,7 +709,7 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 		dev_vdbg(dwc->dev, "Forwarding to gadget driver\n");
 		ret = dwc3_ep0_delegate_req(dwc, ctrl);
 		break;
-	};
+	}
 
 	return ret;
 }

drivers/usb/gadget/composite.c

@@ -354,7 +354,7 @@ static u8 encode_bMaxPower(enum usb_device_speed speed,
 		return DIV_ROUND_UP(val, 8);
 	default:
 		return DIV_ROUND_UP(val, 2);
-	};
+	}
 }
 
 static int config_buf(struct usb_configuration *config,

drivers/usb/gadget/dummy_hcd.c

@@ -544,7 +544,7 @@ static int dummy_enable(struct usb_ep *_ep,
 		 default:
 			 val = "ctrl";
 			 break;
-		 }; val; }),
+		 } val; }),
 		max, ep->stream_en ? "enabled" : "disabled");
 
 	/* at this point real hardware should be NAKing transfers
@@ -2271,7 +2271,7 @@ static inline ssize_t show_urb(char *buf, size_t size, struct urb *urb)
 		default:
 			s = "?";
 			break;
-		 }; s; }),
+		 } s; }),
 		ep, ep ? (usb_pipein(urb->pipe) ? "in" : "out") : "",
 		({ char *s; \
 		switch (usb_pipetype(urb->pipe)) { \
@@ -2287,7 +2287,7 @@ static inline ssize_t show_urb(char *buf, size_t size, struct urb *urb)
 		default: \
 			s = "-iso"; \
 			break; \
-		}; s; }),
+		} s; }),
 		urb->actual_length, urb->transfer_buffer_length);
 }
 

drivers/usb/gadget/goku_udc.c

@@ -1165,7 +1165,7 @@ static int udc_proc_read(struct seq_file *m, void *v)
 				s = "invalid"; break;
 			default:
 				s = "?"; break;
-			}; s; }),
+			} s; }),
 			(tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0",
 			(tmp & EPxSTATUS_SUSPEND) ? " suspend" : "",
 			(tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "",

drivers/usb/gadget/net2280.c

@@ -129,7 +129,7 @@ static char *type_string (u8 bmAttributes)
 	case USB_ENDPOINT_XFER_BULK:	return "bulk";
 	case USB_ENDPOINT_XFER_ISOC:	return "iso";
 	case USB_ENDPOINT_XFER_INT:	return "intr";
-	};
+	}
 	return "control";
 }
 #endif
@@ -1630,7 +1630,7 @@ static ssize_t queues_show(struct device *_dev, struct device_attribute *attr,
 					val = "intr"; break;
 				 default:
 					val = "iso"; break;
-				 }; val; }),
+				 } val; }),
 				usb_endpoint_maxp (d) & 0x1fff,
 				ep->dma ? "dma" : "pio", ep->fifo_size
 				);

drivers/usb/gadget/rndis.c

@@ -1068,7 +1068,7 @@ static int rndis_proc_show(struct seq_file *m, void *v)
 				s = "RNDIS_INITIALIZED"; break;
 			 case RNDIS_DATA_INITIALIZED:
 				s = "RNDIS_DATA_INITIALIZED"; break;
-			}; s; }),
+			} s; }),
 			 param->medium,
 			 (param->media_state) ? 0 : param->speed*100,
 			 (param->media_state) ? "disconnected" : "connected",

drivers/usb/gadget/tcm_usb_gadget.c

@@ -472,7 +472,7 @@ static int usbg_bot_setup(struct usb_function *f,
 		bot_enqueue_cmd_cbw(fu);
 		return 0;
 		break;
-	};
+	}
 	return -ENOTSUPP;
 }
 
@@ -617,7 +617,7 @@ static void uasp_status_data_cmpl(struct usb_ep *ep, struct usb_request *req)
 
 	default:
 		BUG();
-	};
+	}
 	return;
 
 cleanup:

drivers/usb/host/ehci-dbg.c

@@ -379,7 +379,7 @@ struct debug_buffer {
 		case QH_LOW_SPEED:  tmp = 'l'; break; \
 		case QH_HIGH_SPEED: tmp = 'h'; break; \
 		default: tmp = '?'; break; \
-		}; tmp; })
+		} tmp; })
 
 static inline char token_mark(struct ehci_hcd *ehci, __hc32 token)
 {

drivers/usb/host/fotg210-hcd.c

@@ -412,7 +412,7 @@ struct debug_buffer {
 			tmp = 'h'; break; \
 		default:		\
 			tmp = '?'; break; \
-		}; tmp; })
+		} tmp; })
 
 static inline char token_mark(struct fotg210_hcd *fotg210, __hc32 token)
 {

drivers/usb/host/fusbh200-hcd.c

@@ -402,7 +402,7 @@ struct debug_buffer {
 		case QH_LOW_SPEED:  tmp = 'l'; break; \
 		case QH_HIGH_SPEED: tmp = 'h'; break; \
 		default: tmp = '?'; break; \
-		}; tmp; })
+		} tmp; })
 
 static inline char token_mark(struct fusbh200_hcd *fusbh200, __hc32 token)
 {

drivers/usb/host/isp1362-hcd.c

@@ -2108,7 +2108,7 @@ static int isp1362_show(struct seq_file *s, void *unused)
 				   default:
 					   s = "?";
 					   break;
-				   };
+				   }
 				   s;}), ep->maxpacket) ;
 		list_for_each_entry(urb, &ep->hep->urb_list, urb_list) {
 			seq_printf(s, "  urb%p, %d/%d\n", urb,

drivers/usb/host/ohci-dbg.c

@@ -17,7 +17,7 @@
 	case PIPE_BULK:		temp = "bulk"; break; \
 	case PIPE_INTERRUPT:	temp = "intr"; break; \
 	default:		temp = "isoc"; break; \
-	}; temp;})
+	} temp;})
 #define pipestring(pipe) edstring(usb_pipetype(pipe))
 
 /* debug| print the main components of an URB

drivers/usb/host/sl811-hcd.c

@@ -1413,7 +1413,7 @@ static int sl811h_show(struct seq_file *s, void *unused)
 			case SL11H_CTL1MASK_SE0: s = " se0/reset"; break;
 			case SL11H_CTL1MASK_K: s = " k/resume"; break;
 			default: s = "j"; break;
-			}; s; }),
+			} s; }),
 			(t & SL11H_CTL1MASK_LSPD) ? " lowspeed" : "",
 			(t & SL11H_CTL1MASK_SUSPEND) ? " suspend" : "");
 
@@ -1446,7 +1446,7 @@ static int sl811h_show(struct seq_file *s, void *unused)
 			case USB_PID_SETUP: s = "setup"; break;
 			case USB_PID_ACK: s = "status"; break;
 			default: s = "?"; break;
-			}; s;}),
+			} s;}),
 			ep->maxpacket,
 			ep->nak_count, ep->error_count);
 		list_for_each_entry (urb, &ep->hep->urb_list, urb_list) {

drivers/usb/host/uhci-pci.c

@@ -178,7 +178,7 @@ static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 		dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n");
 		rc = -EBUSY;
 		goto done;
-	};
+	}
 
 	/* All PCI host controllers are required to disable IRQ generation
 	 * at the source, so we must turn off PIRQ.

drivers/usb/host/whci/hcd.c

@@ -134,7 +134,7 @@ static int whc_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb,
 	default:
 		ret = asl_urb_enqueue(whc, urb, mem_flags);
 		break;
-	};
+	}
 
 	return ret;
 }
@@ -160,7 +160,7 @@ static int whc_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, int status)
 	default:
 		ret = asl_urb_dequeue(whc, urb, status);
 		break;
-	};
+	}
 
 	return ret;
 }

drivers/usb/musb/musb_core.c

@@ -617,7 +617,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 				/* case 3 << MUSB_DEVCTL_VBUS_SHIFT: */
 				default:
 					s = "VALID"; break;
-				}; s; }),
+				} s; }),
 				VBUSERR_RETRY_COUNT - musb->vbuserr_retry,
 				musb->port1_status);
 

drivers/usb/musb/musb_dsps.c

@@ -443,7 +443,7 @@ static int get_musb_port_mode(struct device *dev)
 	case USB_DR_MODE_OTG:
 	default:
 		return MUSB_PORT_MODE_DUAL_ROLE;
-	};
+	}
 }
 
 static int dsps_create_musb_pdev(struct dsps_glue *glue,

drivers/usb/musb/musb_gadget.c

@@ -1121,7 +1121,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
 			case USB_ENDPOINT_XFER_BULK:	s = "bulk"; break;
 			case USB_ENDPOINT_XFER_INT:	s = "int"; break;
 			default:			s = "iso"; break;
-			}; s; }),
+			} s; }),
 			musb_ep->is_in ? "IN" : "OUT",
 			musb_ep->dma ? "dma, " : "",
 			musb_ep->packet_sz);

drivers/usb/musb/musb_host.c

@@ -253,7 +253,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
 			case USB_ENDPOINT_XFER_BULK:	s = "-bulk"; break;
 			case USB_ENDPOINT_XFER_ISOC:	s = "-iso"; break;
 			default:			s = "-intr"; break;
-			}; s; }),
+			} s; }),
 			epnum, buf + offset, len);
 
 	/* Configure endpoint */

drivers/usb/phy/phy-ulpi-viewport.c

@@ -36,7 +36,7 @@ static int ulpi_viewport_wait(void __iomem *view, u32 mask)
 			return 0;
 
 		udelay(1);
-	};
+	}
 
 	return -ETIMEDOUT;
 }

drivers/usb/wusbcore/cbaf.c

@@ -208,9 +208,9 @@ static int cbaf_check(struct cbaf *cbaf)
 				ar_name = "ASSOCIATE";
 				ar_assoc = 1;
 				break;
-			};
+			}
 			break;
-		};
+		}
 
 		dev_dbg(dev, "Association request #%02u: 0x%04x/%04x "
 			 "(%zu bytes): %s\n",

drivers/usb/wusbcore/devconnect.c

@@ -973,7 +973,7 @@ int wusb_usb_ncb(struct notifier_block *nb, unsigned long val,
 	default:
 		WARN_ON(1);
 		result = NOTIFY_BAD;
-	};
+	}
 	return result;
 }