usb: add CONFIG_USB_PCI for system have both PCI HW and non-PCI based USB HW

a lot of embeded system SOC (e.g. freescale T2080) have both
PCI and USB modules. But USB module is controlled by registers directly,
it have no relationship with PCI module.

when say N here it will not build PCI related code in USB driver.
Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/Kconfig

@@ -35,7 +35,6 @@ config USB_COMMON
 config USB_ARCH_HAS_HCD
 	def_bool y
 
-# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
 config USB
 	tristate "Support for Host-side USB"
 	depends on USB_ARCH_HAS_HCD
@@ -73,6 +72,17 @@ config USB
 	  To compile this driver as a module, choose M here: the
 	  module will be called usbcore.
 
+config USB_PCI
+	bool "PCI based USB host interface"
+	depends on PCI
+	default y
+	---help---
+	  A lot of embeded system SOC (e.g. freescale T2080) have both
+	  PCI and USB modules. But USB module is controlled by registers
+	  directly, it have no relationship with PCI module.
+
+	  When say N here it will not build PCI related code in USB driver.
+
 if USB
 
 source "drivers/usb/core/Kconfig"

drivers/usb/Makefile

@@ -14,7 +14,7 @@ obj-$(CONFIG_USB_ISP1760)	+= isp1760/
 obj-$(CONFIG_USB_MON)		+= mon/
 obj-$(CONFIG_USB_MTU3)		+= mtu3/
 
-obj-$(CONFIG_PCI)		+= host/
+obj-$(CONFIG_USB_PCI)		+= host/
 obj-$(CONFIG_USB_EHCI_HCD)	+= host/
 obj-$(CONFIG_USB_ISP116X_HCD)	+= host/
 obj-$(CONFIG_USB_OHCI_HCD)	+= host/

drivers/usb/chipidea/Kconfig

@@ -20,7 +20,7 @@ config USB_CHIPIDEA_OF
 
 config USB_CHIPIDEA_PCI
 	tristate
-	depends on PCI
+	depends on USB_PCI
 	depends on NOP_USB_XCEIV
 	default USB_CHIPIDEA
 

drivers/usb/core/Makefile

@@ -8,7 +8,7 @@ usbcore-y += devio.o notify.o generic.o quirks.o devices.o
 usbcore-y += port.o
 
 usbcore-$(CONFIG_OF)		+= of.o
-usbcore-$(CONFIG_PCI)		+= hcd-pci.o
+usbcore-$(CONFIG_USB_PCI)		+= hcd-pci.o
 usbcore-$(CONFIG_ACPI)		+= usb-acpi.o
 
 obj-$(CONFIG_USB)		+= usbcore.o

drivers/usb/dwc2/Kconfig

@@ -54,7 +54,7 @@ endchoice
 
 config USB_DWC2_PCI
 	tristate "DWC2 PCI"
-	depends on PCI
+	depends on USB_PCI
 	depends on USB_GADGET || !USB_GADGET
 	default n
 	select NOP_USB_XCEIV

drivers/usb/dwc3/Kconfig

@@ -70,7 +70,7 @@ config USB_DWC3_EXYNOS
 
 config USB_DWC3_PCI
 	tristate "PCIe-based Platforms"
-	depends on PCI && ACPI
+	depends on USB_PCI && ACPI
 	default USB_DWC3
 	help
 	  If you're using the DesignWare Core IP with a PCIe, please say

drivers/usb/gadget/udc/Kconfig

@@ -277,7 +277,7 @@ source "drivers/usb/gadget/udc/bdc/Kconfig"
 
 config USB_AMD5536UDC
 	tristate "AMD5536 UDC"
-	depends on PCI
+	depends on USB_PCI
 	help
 	   The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge.
 	   It is a USB Highspeed DMA capable USB device controller. Beside ep0
@@ -327,7 +327,7 @@ config USB_NET2272_DMA
 
 config USB_NET2280
 	tristate "NetChip NET228x / PLX USB3x8x"
-	depends on PCI
+	depends on USB_PCI
 	help
 	   NetChip 2280 / 2282 is a PCI based USB peripheral controller which
 	   supports both full and high speed USB 2.0 data transfers.
@@ -352,7 +352,7 @@ config USB_NET2280
 
 config USB_GOKU
 	tristate "Toshiba TC86C001 'Goku-S'"
-	depends on PCI
+	depends on USB_PCI
 	help
 	   The Toshiba TC86C001 is a PCI device which includes controllers
 	   for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
@@ -366,7 +366,7 @@ config USB_GOKU
 
 config USB_EG20T
 	tristate "Intel QUARK X1000/EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
-	depends on PCI
+	depends on USB_PCI
 	help
 	  This is a USB device driver for EG20T PCH.
 	  EG20T PCH is the platform controller hub that is used in Intel's

drivers/usb/gadget/udc/bdc/Kconfig

@@ -14,7 +14,7 @@ if USB_BDC_UDC
 comment "Platform Support"
 config	USB_BDC_PCI
 	tristate "BDC support for PCIe based platforms"
-	depends on PCI
+	depends on USB_PCI
 	default USB_BDC_UDC
 	help
 		Enable support for platforms which have BDC connected through PCIe, such as Lego3 FPGA platform.

drivers/usb/gadget/udc/net2272.c

@@ -653,7 +653,7 @@ net2272_request_dma(struct net2272 *dev, unsigned ep, u32 buf,
 	dev->dma_busy = 1;
 
 	/* initialize platform's dma */
-#ifdef CONFIG_PCI
+#ifdef CONFIG_USB_PCI
 	/* NET2272 addr, buffer addr, length, etc. */
 	switch (dev->dev_id) {
 	case PCI_DEVICE_ID_RDK1:
@@ -701,7 +701,7 @@ static void
 net2272_start_dma(struct net2272 *dev)
 {
 	/* start platform's dma controller */
-#ifdef CONFIG_PCI
+#ifdef CONFIG_USB_PCI
 	switch (dev->dev_id) {
 	case PCI_DEVICE_ID_RDK1:
 		writeb((1 << CHANNEL_ENABLE) | (1 << CHANNEL_START),
@@ -797,7 +797,7 @@ net2272_kick_dma(struct net2272_ep *ep, struct net2272_request *req)
 
 static void net2272_cancel_dma(struct net2272 *dev)
 {
-#ifdef CONFIG_PCI
+#ifdef CONFIG_USB_PCI
 	switch (dev->dev_id) {
 	case PCI_DEVICE_ID_RDK1:
 		writeb(0, dev->rdk1.plx9054_base_addr + DMACSR0);
@@ -2306,7 +2306,7 @@ net2272_probe_fin(struct net2272 *dev, unsigned int irqflags)
 	return ret;
 }
 
-#ifdef CONFIG_PCI
+#ifdef CONFIG_USB_PCI
 
 /*
  * wrap this driver around the specified device, but

drivers/usb/gadget/udc/net2272.h

@@ -472,7 +472,7 @@ struct net2272 {
 	unsigned int base_shift;
 	u16 __iomem *base_addr;
 	union {
-#ifdef CONFIG_PCI
+#ifdef CONFIG_USB_PCI
 		struct {
 			void __iomem *plx9054_base_addr;
 			void __iomem *epld_base_addr;

drivers/usb/host/Kconfig

@@ -30,7 +30,7 @@ if USB_XHCI_HCD
 
 config USB_XHCI_PCI
        tristate
-       depends on PCI
+       depends on USB_PCI
        default y
 
 config USB_XHCI_PLATFORM
@@ -139,7 +139,7 @@ if USB_EHCI_HCD
 
 config USB_EHCI_PCI
 	tristate
-	depends on PCI
+	depends on USB_PCI
 	default y
 
 config USB_EHCI_HCD_PMC_MSP
@@ -525,7 +525,7 @@ config USB_OHCI_HCD_PPC_OF
 
 config USB_OHCI_HCD_PCI
 	tristate "OHCI support for PCI-bus USB controllers"
-	depends on PCI
+	depends on USB_PCI
 	default y
 	select USB_OHCI_LITTLE_ENDIAN
 	---help---
@@ -606,7 +606,7 @@ endif # USB_OHCI_HCD
 
 config USB_UHCI_HCD
 	tristate "UHCI HCD (most Intel and VIA) support"
-	depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC
+	depends on USB_PCI || USB_UHCI_SUPPORT_NON_PCI_HC
 	---help---
 	  The Universal Host Controller Interface is a standard by Intel for
 	  accessing the USB hardware in the PC (which is also called the USB
@@ -739,7 +739,7 @@ config USB_RENESAS_USBHS_HCD
 
 config USB_WHCI_HCD
 	tristate "Wireless USB Host Controller Interface (WHCI) driver"
-	depends on PCI && USB && UWB
+	depends on USB_PCI && USB && UWB
 	select USB_WUSB
 	select UWB_WHCI
 	help

drivers/usb/host/Makefile

@@ -27,9 +27,7 @@ endif
 
 obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
 
-ifneq ($(CONFIG_USB), )
-	obj-$(CONFIG_PCI)	+= pci-quirks.o
-endif
+obj-$(CONFIG_USB_PCI)	+= pci-quirks.o
 
 obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
 obj-$(CONFIG_USB_EHCI_PCI)	+= ehci-pci.o

drivers/usb/host/ehci-dbg.c

@@ -803,7 +803,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf)
 	size -= temp;
 	next += temp;
 
-#ifdef	CONFIG_PCI
+#ifdef	CONFIG_USB_PCI
 	/* EHCI 0.96 and later may have "extended capabilities" */
 	if (dev_is_pci(hcd->self.controller)) {
 		struct pci_dev	*pdev;

drivers/usb/host/ohci-hcd.c

@@ -994,7 +994,7 @@ static void ohci_stop (struct usb_hcd *hcd)
 
 /*-------------------------------------------------------------------------*/
 
-#if defined(CONFIG_PM) || defined(CONFIG_PCI)
+#if defined(CONFIG_PM) || defined(CONFIG_USB_PCI)
 
 /* must not be called from interrupt context */
 int ohci_restart(struct ohci_hcd *ohci)

drivers/usb/host/ohci.h

@@ -438,7 +438,7 @@ struct ohci_hcd {
 
 };
 
-#ifdef CONFIG_PCI
+#ifdef CONFIG_USB_PCI
 static inline int quirk_nec(struct ohci_hcd *ohci)
 {
 	return ohci->flags & OHCI_QUIRK_NEC;

drivers/usb/host/pci-quirks.h

 #ifndef __LINUX_USB_PCI_QUIRKS_H
 #define __LINUX_USB_PCI_QUIRKS_H
 
-#ifdef CONFIG_PCI
+#ifdef CONFIG_USB_PCI
 void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
 int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
 int usb_amd_find_chipset_info(void);
@@ -21,6 +21,6 @@ static inline void usb_amd_quirk_pll_enable(void) {}
 static inline void usb_amd_dev_put(void) {}
 static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
 static inline void sb800_prefetch(struct device *dev, int on) {}
-#endif  /* CONFIG_PCI */
+#endif  /* CONFIG_USB_PCI */
 
 #endif  /*  __LINUX_USB_PCI_QUIRKS_H  */

drivers/usb/host/uhci-hcd.c

@@ -837,7 +837,7 @@ static int uhci_count_ports(struct usb_hcd *hcd)
 
 static const char hcd_name[] = "uhci_hcd";
 
-#ifdef CONFIG_PCI
+#ifdef CONFIG_USB_PCI
 #include "uhci-pci.c"
 #define	PCI_DRIVER		uhci_pci_driver
 #endif

drivers/usb/host/uhci-hcd.h

@@ -530,7 +530,7 @@ static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
 
 #else
 /* Support non-PCI host controllers */
-#ifdef CONFIG_PCI
+#ifdef CONFIG_USB_PCI
 /* Support PCI and non-PCI host controllers */
 #define uhci_has_pci_registers(u)	((u)->io_addr != 0)
 #else

drivers/usb/host/xhci.c

@@ -216,7 +216,7 @@ int xhci_reset(struct xhci_hcd *xhci)
 	return ret;
 }
 
-#ifdef CONFIG_PCI
+#ifdef CONFIG_USB_PCI
 static int xhci_free_msi(struct xhci_hcd *xhci)
 {
 	int i;

drivers/usb/isp1760/isp1760-if.c

@@ -21,11 +21,11 @@
 #include "isp1760-core.h"
 #include "isp1760-regs.h"
 
-#ifdef CONFIG_PCI
+#ifdef CONFIG_USB_PCI
 #include <linux/pci.h>
 #endif
 
-#ifdef CONFIG_PCI
+#ifdef CONFIG_USB_PCI
 static int isp1761_pci_init(struct pci_dev *dev)
 {
 	resource_size_t mem_start;
@@ -286,7 +286,7 @@ static int __init isp1760_init(void)
 	ret = platform_driver_register(&isp1760_plat_driver);
 	if (!ret)
 		any_ret = 0;
-#ifdef CONFIG_PCI
+#ifdef CONFIG_USB_PCI
 	ret = pci_register_driver(&isp1761_pci_driver);
 	if (!ret)
 		any_ret = 0;
@@ -301,7 +301,7 @@ module_init(isp1760_init);
 static void __exit isp1760_exit(void)
 {
 	platform_driver_unregister(&isp1760_plat_driver);
-#ifdef CONFIG_PCI
+#ifdef CONFIG_USB_PCI
 	pci_unregister_driver(&isp1761_pci_driver);
 #endif
 	isp1760_deinit_kmem_cache();

include/linux/usb/hcd.h

@@ -453,7 +453,7 @@ extern int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1);
 struct platform_device;
 extern void usb_hcd_platform_shutdown(struct platform_device *dev);
 
-#ifdef CONFIG_PCI
+#ifdef CONFIG_USB_PCI
 struct pci_dev;
 struct pci_device_id;
 extern int usb_hcd_pci_probe(struct pci_dev *dev,
@@ -466,7 +466,7 @@ extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
 #ifdef CONFIG_PM
 extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
 #endif
-#endif /* CONFIG_PCI */
+#endif /* CONFIG_USB_PCI */
 
 /* pci-ish (pdev null is ok) buffer alloc/mapping support */
 void usb_init_pool_max(void);