[PATCH] USB: cleanup of st5481

you are using __devinit which must not be used with USB drivers,
in addition you are using some false GFP values and fail to check
some error codes.

  - check for unlink due to removal of controller
  - correct GFP values
  - no __devinit in USB

drivers/isdn/hisax/st5481_b.c

@@ -119,7 +119,7 @@ static void usb_b_out(struct st5481_bcs *bcs,int buf_nr)
 
 	DBG_ISO_PACKET(0x200,urb);
 
-	SUBMIT_URB(urb, GFP_KERNEL);
+	SUBMIT_URB(urb, GFP_NOIO);
 }
 
 /*
@@ -171,8 +171,8 @@ static void usb_b_out_complete(struct urb *urb, struct pt_regs *regs)
 	buf_nr = get_buf_nr(b_out->urb, urb);
 	test_and_clear_bit(buf_nr, &b_out->busy);
 
-	if (urb->status < 0) {
-		if (urb->status != -ENOENT) {
+	if (unlikely(urb->status < 0)) {
+		if (urb->status != -ENOENT && urb->status != -ESHUTDOWN) {
 			WARN("urb status %d",urb->status);
 			if (b_out->busy == 0) {
 				st5481_usb_pipe_reset(adapter, (bcs->channel+1)*2 | USB_DIR_OUT, NULL, NULL);

drivers/isdn/hisax/st5481_d.c

@@ -381,8 +381,8 @@ static void usb_d_out_complete(struct urb *urb, struct pt_regs *regs)
 	buf_nr = get_buf_nr(d_out->urb, urb);
 	test_and_clear_bit(buf_nr, &d_out->busy);
 
-	if (urb->status < 0) {
-		if (urb->status != -ENOENT) {
+	if (unlikely(urb->status < 0)) {
+		if (urb->status != -ENOENT && urb->status != -ESHUTDOWN) {
 			WARN("urb status %d",urb->status);
 			if (d_out->busy == 0) {
 				st5481_usb_pipe_reset(adapter, EP_D_OUT | USB_DIR_OUT, fifo_reseted, adapter);
@@ -649,7 +649,7 @@ static void ph_disconnect(struct st5481_adapter *adapter)
 	st5481_usb_device_ctrl_msg(adapter, GPIO_OUT, adapter->leds, NULL, NULL);
 }
 
-static int __devinit st5481_setup_d_out(struct st5481_adapter *adapter)
+static int st5481_setup_d_out(struct st5481_adapter *adapter)
 {
 	struct usb_device *dev = adapter->usb_dev;
 	struct usb_host_interface *altsetting;
@@ -682,7 +682,7 @@ static void st5481_release_d_out(struct st5481_adapter *adapter)
 	st5481_release_isocpipes(d_out->urb);
 }
 
-int __devinit st5481_setup_d(struct st5481_adapter *adapter)
+int st5481_setup_d(struct st5481_adapter *adapter)
 {
 	int retval;
 

drivers/isdn/hisax/st5481_init.c

@@ -58,8 +58,8 @@ static LIST_HEAD(adapter_list);
  * This function will be called when the adapter is plugged
  * into the USB bus.
  */
-static int __devinit probe_st5481(struct usb_interface *intf,
-				     const struct usb_device_id *id)
+static int probe_st5481(struct usb_interface *intf,
+			const struct usb_device_id *id)
 {
 	struct usb_device *dev = interface_to_usbdev(intf);
 	struct st5481_adapter *adapter;

drivers/isdn/hisax/st5481_usb.c

@@ -48,7 +48,7 @@ static void usb_next_ctrl_msg(struct urb *urb,
 	// Prepare the URB
 	urb->dev = adapter->usb_dev;
 
-	SUBMIT_URB(urb, GFP_KERNEL);
+	SUBMIT_URB(urb, GFP_ATOMIC);
 }
 
 /*
@@ -129,8 +129,8 @@ static void usb_ctrl_complete(struct urb *urb, struct pt_regs *regs)
 	struct st5481_ctrl *ctrl = &adapter->ctrl;
 	struct ctrl_msg *ctrl_msg;
 	
-	if (urb->status < 0) {
-		if (urb->status != -ENOENT) {
+	if (unlikely(urb->status < 0)) {
+		if (urb->status != -ENOENT && urb->status != -ESHUTDOWN) {
 			WARN("urb status %d",urb->status);
 		} else {
 			DBG(1,"urb killed");
@@ -239,7 +239,7 @@ static void usb_int_complete(struct urb *urb, struct pt_regs *regs)
  * initialization
  */
 
-int __devinit st5481_setup_usb(struct st5481_adapter *adapter)
+int (struct st5481_adapter *adapter)
 {
 	struct usb_device *dev = adapter->usb_dev;
 	struct st5481_ctrl *ctrl = &adapter->ctrl;
@@ -341,7 +341,7 @@ void st5481_release_usb(struct st5481_adapter *adapter)
 /*
  *  Initialize the adapter.
  */
-void __devinit st5481_start(struct st5481_adapter *adapter)
+void st5481_start(struct st5481_adapter *adapter)
 {
 	static const u8 init_cmd_table[]={
 		SET_DEFAULT,0,
@@ -381,7 +381,7 @@ void __devinit st5481_start(struct st5481_adapter *adapter)
 /*
  * Reset the adapter to default values.
  */
-void __devexit st5481_stop(struct st5481_adapter *adapter)
+void st5481_stop(struct st5481_adapter *adapter)
 {
 	DBG(8,"");
 
@@ -392,7 +392,7 @@ void __devexit st5481_stop(struct st5481_adapter *adapter)
  * isochronous USB  helpers
  */
 
-static void __devinit
+static void
 fill_isoc_urb(struct urb *urb, struct usb_device *dev,
 	      unsigned int pipe, void *buf, int num_packets, 
 	      int packet_size, usb_complete_t complete,
@@ -417,7 +417,7 @@ fill_isoc_urb(struct urb *urb, struct usb_device *dev,
 	}
 }
 
-int __devinit
+int
 st5481_setup_isocpipes(struct urb* urb[2], struct usb_device *dev, 
 			   unsigned int pipe, int num_packets,
 			   int packet_size, int buf_size,
@@ -481,8 +481,8 @@ static void usb_in_complete(struct urb *urb, struct pt_regs *regs)
 	struct sk_buff *skb;
 	int len, count, status;
 
-	if (urb->status < 0) {
-		if (urb->status != -ENOENT) {
+	if (unlikely(urb->status < 0)) {
+		if (urb->status != -ENOENT && urb->status != -ESHUTDOWN) {
 			WARN("urb status %d",urb->status);
 		} else {
 			DBG(1,"urb killed");
@@ -529,10 +529,10 @@ static void usb_in_complete(struct urb *urb, struct pt_regs *regs)
 	urb->dev = in->adapter->usb_dev;
 	urb->actual_length = 0;
 
-	SUBMIT_URB(urb, GFP_KERNEL);
+	SUBMIT_URB(urb, GFP_ATOMIC);
 }
 
-int __devinit st5481_setup_in(struct st5481_in *in)
+int st5481_setup_in(struct st5481_in *in)
 {
 	struct usb_device *dev = in->adapter->usb_dev;
 	int retval;