b43: Replace HTTP links with HTTPS ones

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200719110115.58085-1-grandmaster@al2klimov.de

drivers/net/wireless/broadcom/b43/main.c

@@ -734,7 +734,7 @@ static void b43_short_slot_timing_disable(struct b43_wldev *dev)
 }
 
 /* DummyTransmission function, as documented on
- * http://bcm-v4.sipsolutions.net/802.11/DummyTransmission
+ * https://bcm-v4.sipsolutions.net/802.11/DummyTransmission
  */
 void b43_dummy_transmission(struct b43_wldev *dev, bool ofdm, bool pa_on)
 {
@@ -1198,7 +1198,7 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
 	}
 }
 
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/BmacCorePllReset */
+/* https://bcm-v4.sipsolutions.net/802.11/PHY/BmacCorePllReset */
 void b43_wireless_core_phy_pll_reset(struct b43_wldev *dev)
 {
 	struct bcma_drv_cc *bcma_cc __maybe_unused;
@@ -2290,7 +2290,7 @@ int b43_do_request_fw(struct b43_request_fw_context *ctx,
 	return -EPROTO;
 }
 
-/* http://bcm-v4.sipsolutions.net/802.11/Init/Firmware */
+/* https://bcm-v4.sipsolutions.net/802.11/Init/Firmware */
 static int b43_try_request_fw(struct b43_request_fw_context *ctx)
 {
 	struct b43_wldev *dev = ctx->dev;
@@ -2843,7 +2843,7 @@ static int b43_upload_initvals_band(struct b43_wldev *dev)
 }
 
 /* Initialize the GPIOs
- * http://bcm-specs.sipsolutions.net/GPIO
+ * https://bcm-specs.sipsolutions.net/GPIO
  */
 
 #ifdef CONFIG_B43_SSB
@@ -2971,7 +2971,7 @@ void b43_mac_enable(struct b43_wldev *dev)
 	}
 }
 
-/* http://bcm-specs.sipsolutions.net/SuspendMAC */
+/* https://bcm-specs.sipsolutions.net/SuspendMAC */
 void b43_mac_suspend(struct b43_wldev *dev)
 {
 	int i;
@@ -3004,7 +3004,7 @@ void b43_mac_suspend(struct b43_wldev *dev)
 	dev->mac_suspended++;
 }
 
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/MacPhyClkSet */
+/* https://bcm-v4.sipsolutions.net/802.11/PHY/N/MacPhyClkSet */
 void b43_mac_phy_clock_set(struct b43_wldev *dev, bool on)
 {
 	u32 tmp;
@@ -3231,7 +3231,7 @@ static void b43_chip_exit(struct b43_wldev *dev)
 }
 
 /* Initialize the chip
- * http://bcm-specs.sipsolutions.net/ChipInit
+ * https://bcm-specs.sipsolutions.net/ChipInit
  */
 static int b43_chip_init(struct b43_wldev *dev)
 {

drivers/net/wireless/broadcom/b43/phy_common.c

@@ -559,7 +559,7 @@ bool b43_is_40mhz(struct b43_wldev *dev)
 	return dev->phy.chandef->width == NL80211_CHAN_WIDTH_40;
 }
 
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/BmacPhyClkFgc */
+/* https://bcm-v4.sipsolutions.net/802.11/PHY/N/BmacPhyClkFgc */
 void b43_phy_force_clock(struct b43_wldev *dev, bool force)
 {
 	u32 tmp;

drivers/net/wireless/broadcom/b43/phy_g.c

@@ -357,14 +357,14 @@ static void b43_set_original_gains(struct b43_wldev *dev)
 	b43_dummy_transmission(dev, false, true);
 }
 
-/* http://bcm-specs.sipsolutions.net/NRSSILookupTable */
+/* https://bcm-specs.sipsolutions.net/NRSSILookupTable */
 static void b43_nrssi_hw_write(struct b43_wldev *dev, u16 offset, s16 val)
 {
 	b43_phy_write(dev, B43_PHY_NRSSILT_CTRL, offset);
 	b43_phy_write(dev, B43_PHY_NRSSILT_DATA, (u16) val);
 }
 
-/* http://bcm-specs.sipsolutions.net/NRSSILookupTable */
+/* https://bcm-specs.sipsolutions.net/NRSSILookupTable */
 static s16 b43_nrssi_hw_read(struct b43_wldev *dev, u16 offset)
 {
 	u16 val;
@@ -375,7 +375,7 @@ static s16 b43_nrssi_hw_read(struct b43_wldev *dev, u16 offset)
 	return (s16) val;
 }
 
-/* http://bcm-specs.sipsolutions.net/NRSSILookupTable */
+/* https://bcm-specs.sipsolutions.net/NRSSILookupTable */
 static void b43_nrssi_hw_update(struct b43_wldev *dev, u16 val)
 {
 	u16 i;
@@ -389,7 +389,7 @@ static void b43_nrssi_hw_update(struct b43_wldev *dev, u16 val)
 	}
 }
 
-/* http://bcm-specs.sipsolutions.net/NRSSILookupTable */
+/* https://bcm-specs.sipsolutions.net/NRSSILookupTable */
 static void b43_nrssi_mem_update(struct b43_wldev *dev)
 {
 	struct b43_phy_g *gphy = dev->phy.g;
@@ -1575,7 +1575,7 @@ static void b43_phy_initb5(struct b43_wldev *dev)
 	b43_write16(dev, 0x03E4, (b43_read16(dev, 0x03E4) & 0xFFC0) | 0x0004);
 }
 
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/Init/B6 */
+/* https://bcm-v4.sipsolutions.net/802.11/PHY/Init/B6 */
 static void b43_phy_initb6(struct b43_wldev *dev)
 {
 	struct b43_phy *phy = &dev->phy;
@@ -2746,7 +2746,7 @@ static int b43_gphy_op_interf_mitigation(struct b43_wldev *dev,
 	return 0;
 }
 
-/* http://bcm-specs.sipsolutions.net/EstimatePowerOut
+/* https://bcm-specs.sipsolutions.net/EstimatePowerOut
  * This function converts a TSSI value to dBm in Q5.2
  */
 static s8 b43_gphy_estimate_power_out(struct b43_wldev *dev, s8 tssi)

drivers/net/wireless/broadcom/b43/phy_ht.c

@@ -1018,7 +1018,7 @@ static void b43_phy_ht_op_free(struct b43_wldev *dev)
 	phy->ht = NULL;
 }
 
-/* http://bcm-v4.sipsolutions.net/802.11/Radio/Switch%20Radio */
+/* https://bcm-v4.sipsolutions.net/802.11/Radio/Switch%20Radio */
 static void b43_phy_ht_op_software_rfkill(struct b43_wldev *dev,
 					bool blocked)
 {

drivers/net/wireless/broadcom/b43/phy_lp.c

@@ -70,7 +70,7 @@ static void b43_lpphy_op_free(struct b43_wldev *dev)
 	dev->phy.lp = NULL;
 }
 
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/LP/ReadBandSrom */
+/* https://bcm-v4.sipsolutions.net/802.11/PHY/LP/ReadBandSrom */
 static void lpphy_read_band_sprom(struct b43_wldev *dev)
 {
 	struct ssb_sprom *sprom = dev->dev->bus_sprom;

drivers/net/wireless/broadcom/b43/radio_2056.c

@@ -3072,7 +3072,7 @@ INITTABSPTS(b2056_inittab_radio_rev11);
 	.phy_regs.phy_bw5	= r4,	\
 	.phy_regs.phy_bw6	= r5
 
-/* http://bcm-v4.sipsolutions.net/802.11/Radio/2056/ChannelTable */
+/* https://bcm-v4.sipsolutions.net/802.11/Radio/2056/ChannelTable */
 static const struct b43_nphy_channeltab_entry_rev3 b43_nphy_channeltab_phy_rev3[] = {
   {	.freq			= 4920,
 	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xec, 0x05, 0x05, 0x04,

drivers/net/wireless/broadcom/b43/tables_nphy.c

@@ -3620,7 +3620,7 @@ static void b43_nphy_tables_init_rev0(struct b43_wldev *dev)
 	ntab_upload(dev, B43_NTAB_C1_LOFEEDTH, b43_ntab_loftlt1);
 }
 
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/InitTables */
+/* https://bcm-v4.sipsolutions.net/802.11/PHY/N/InitTables */
 void b43_nphy_tables_init(struct b43_wldev *dev)
 {
 	if (dev->phy.rev >= 16)
@@ -3633,7 +3633,7 @@ void b43_nphy_tables_init(struct b43_wldev *dev)
 		b43_nphy_tables_init_rev0(dev);
 }
 
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/GetIpaGainTbl */
+/* https://bcm-v4.sipsolutions.net/802.11/PHY/N/GetIpaGainTbl */
 static const u32 *b43_nphy_get_ipa_gain_table(struct b43_wldev *dev)
 {
 	struct b43_phy *phy = &dev->phy;

drivers/net/wireless/intersil/orinoco/Kconfig

@@ -27,7 +27,7 @@ config HERMES
 
 	  You will also very likely also need the Wireless Tools in order to
 	  configure your card and that /etc/pcmcia/wireless.opts works :
-	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
+	  <https://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
 
 config HERMES_PRISM
 	bool "Support Prism 2/2.5 chipset"
@@ -120,7 +120,7 @@ config PCMCIA_HERMES
 
 	  You will very likely need the Wireless Tools in order to
 	  configure your card and that /etc/pcmcia/wireless.opts works:
-	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+	  <https://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
 
 config PCMCIA_SPECTRUM
 	tristate "Symbol Spectrum24 Trilogy PCMCIA card support"