Commit 2ee8099f authored by Linus Torvalds's avatar Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] sw_any_bug_dmi_table can be used on resume, so it isn't initdata
  [CPUFREQ] Fix some more CPU hotplug locking.
  [CPUFREQ] Workaround for BIOS bug in software coordination of frequency
  [CPUFREQ] Longhaul - Add voltage scaling to driver
  [CPUFREQ] Fix sparse warning in ondemand
  [CPUFREQ] make drivers/cpufreq/cpufreq_ondemand.c:powersave_bias_target() static
  [CPUFREQ] Longhaul - Add ignore_latency option
  [CPUFREQ] Longhaul - Disable arbiter
  [CPUFREQ][2/2] ondemand: updated add powersave_bias tunable
  [CPUFREQ][1/2] ondemand: updated tune for hardware coordination
  [CPUFREQ] Fix typo.
parents c03efdb2 24669f7d
......@@ -32,6 +32,7 @@
#include <linux/seq_file.h>
#include <linux/compiler.h>
#include <linux/sched.h> /* current */
#include <linux/dmi.h>
#include <asm/io.h>
#include <asm/delay.h>
#include <asm/uaccess.h>
......@@ -387,6 +388,33 @@ static int acpi_cpufreq_early_init_acpi(void)
return acpi_processor_preregister_performance(acpi_perf_data);
}
/*
* Some BIOSes do SW_ANY coordination internally, either set it up in hw
* or do it in BIOS firmware and won't inform about it to OS. If not
* detected, this has a side effect of making CPU run at a different speed
* than OS intended it to run at. Detect it and handle it cleanly.
*/
static int bios_with_sw_any_bug;
static int __init sw_any_bug_found(struct dmi_system_id *d)
{
bios_with_sw_any_bug = 1;
return 0;
}
static struct dmi_system_id __initdata sw_any_bug_dmi_table[] = {
{
.callback = sw_any_bug_found,
.ident = "Supermicro Server X6DLP",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
DMI_MATCH(DMI_BIOS_VERSION, "080010"),
DMI_MATCH(DMI_PRODUCT_NAME, "X6DLP"),
},
},
{ }
};
static int
acpi_cpufreq_cpu_init (
struct cpufreq_policy *policy)
......@@ -422,8 +450,17 @@ acpi_cpufreq_cpu_init (
* coordination is required.
*/
if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL ||
policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) {
policy->cpus = perf->shared_cpu_map;
}
#ifdef CONFIG_SMP
dmi_check_system(sw_any_bug_dmi_table);
if (bios_with_sw_any_bug && cpus_weight(policy->cpus) == 1) {
policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
policy->cpus = cpu_core_map[cpu];
}
#endif
if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS;
......
......@@ -27,6 +27,7 @@
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/string.h>
......@@ -52,18 +53,26 @@
#define CPU_NEHEMIAH 5
static int cpu_model;
static unsigned int numscales=16, numvscales;
static unsigned int numscales=16;
static unsigned int fsb;
static int minvid, maxvid;
static struct mV_pos *vrm_mV_table;
static unsigned char *mV_vrm_table;
struct f_msr {
unsigned char vrm;
};
static struct f_msr f_msr_table[32];
static unsigned int highest_speed, lowest_speed; /* kHz */
static unsigned int minmult, maxmult;
static int can_scale_voltage;
static int vrmrev;
static struct acpi_processor *pr = NULL;
static struct acpi_processor_cx *cx = NULL;
static int port22_en;
/* Module parameters */
static int dont_scale_voltage;
static int scale_voltage;
static int ignore_latency;
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg)
......@@ -71,7 +80,6 @@ static int dont_scale_voltage;
/* Clock ratios multiplied by 10 */
static int clock_ratio[32];
static int eblcr_table[32];
static int voltage_table[32];
static unsigned int highest_speed, lowest_speed; /* kHz */
static int longhaul_version;
static struct cpufreq_frequency_table *longhaul_table;
......@@ -124,10 +132,9 @@ static int longhaul_get_cpu_mult(void)
/* For processor with BCR2 MSR */
static void do_longhaul1(int cx_address, unsigned int clock_ratio_index)
static void do_longhaul1(unsigned int clock_ratio_index)
{
union msr_bcr2 bcr2;
u32 t;
rdmsrl(MSR_VIA_BCR2, bcr2.val);
/* Enable software clock multiplier */
......@@ -136,13 +143,11 @@ static void do_longhaul1(int cx_address, unsigned int clock_ratio_index)
/* Sync to timer tick */
safe_halt();
ACPI_FLUSH_CPU_CACHE();
/* Change frequency on next halt or sleep */
wrmsrl(MSR_VIA_BCR2, bcr2.val);
/* Invoke C3 */
inb(cx_address);
/* Dummy op - must do something useless after P_LVL3 read */
t = inl(acpi_fadt.xpm_tmr_blk.address);
/* Invoke transition */
ACPI_FLUSH_CPU_CACHE();
halt();
/* Disable software clock multiplier */
local_irq_disable();
......@@ -164,11 +169,16 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index)
longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
longhaul.bits.EnableSoftBusRatio = 1;
if (can_scale_voltage) {
longhaul.bits.SoftVID = f_msr_table[clock_ratio_index].vrm;
longhaul.bits.EnableSoftVID = 1;
}
/* Sync to timer tick */
safe_halt();
ACPI_FLUSH_CPU_CACHE();
/* Change frequency on next halt or sleep */
wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
ACPI_FLUSH_CPU_CACHE();
/* Invoke C3 */
inb(cx_address);
/* Dummy op - must do something useless after P_LVL3 read */
......@@ -227,10 +237,13 @@ static void longhaul_setstate(unsigned int clock_ratio_index)
outb(0xFF,0xA1); /* Overkill */
outb(0xFE,0x21); /* TMR0 only */
/* Disable bus master arbitration */
if (pr->flags.bm_check) {
if (pr->flags.bm_control) {
/* Disable bus master arbitration */
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1,
ACPI_MTX_DO_NOT_LOCK);
} else if (port22_en) {
/* Disable AGP and PCI arbiters */
outb(3, 0x22);
}
switch (longhaul_version) {
......@@ -244,7 +257,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index)
*/
case TYPE_LONGHAUL_V1:
case TYPE_LONGHAUL_V2:
do_longhaul1(cx->address, clock_ratio_index);
do_longhaul1(clock_ratio_index);
break;
/*
......@@ -259,14 +272,20 @@ static void longhaul_setstate(unsigned int clock_ratio_index)
* to work in practice.
*/
case TYPE_POWERSAVER:
/* Don't allow wakeup */
acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0,
ACPI_MTX_DO_NOT_LOCK);
do_powersaver(cx->address, clock_ratio_index);
break;
}
/* Enable bus master arbitration */
if (pr->flags.bm_check) {
if (pr->flags.bm_control) {
/* Enable bus master arbitration */
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0,
ACPI_MTX_DO_NOT_LOCK);
} else if (port22_en) {
/* Enable arbiters */
outb(0, 0x22);
}
outb(pic2_mask,0xA1); /* restore mask */
......@@ -446,53 +465,57 @@ static int __init longhaul_get_ranges(void)
static void __init longhaul_setup_voltagescaling(void)
{
union msr_longhaul longhaul;
struct mV_pos minvid, maxvid;
unsigned int j, speed, pos, kHz_step, numvscales;
rdmsrl (MSR_VIA_LONGHAUL, longhaul.val);
if (!(longhaul.bits.RevisionID & 1))
rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
if (!(longhaul.bits.RevisionID & 1)) {
printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n");
return;
}
if (!longhaul.bits.VRMRev) {
printk (KERN_INFO PFX "VRM 8.5\n");
vrm_mV_table = &vrm85_mV[0];
mV_vrm_table = &mV_vrm85[0];
} else {
printk (KERN_INFO PFX "Mobile VRM\n");
vrm_mV_table = &mobilevrm_mV[0];
mV_vrm_table = &mV_mobilevrm[0];
}
minvid = longhaul.bits.MinimumVID;
maxvid = longhaul.bits.MaximumVID;
vrmrev = longhaul.bits.VRMRev;
minvid = vrm_mV_table[longhaul.bits.MinimumVID];
maxvid = vrm_mV_table[longhaul.bits.MaximumVID];
numvscales = maxvid.pos - minvid.pos + 1;
kHz_step = (highest_speed - lowest_speed) / numvscales;
if (minvid == 0 || maxvid == 0) {
if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) {
printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
"Voltage scaling disabled.\n",
minvid/1000, minvid%1000, maxvid/1000, maxvid%1000);
minvid.mV/1000, minvid.mV%1000, maxvid.mV/1000, maxvid.mV%1000);
return;
}
if (minvid == maxvid) {
if (minvid.mV == maxvid.mV) {
printk (KERN_INFO PFX "Claims to support voltage scaling but min & max are "
"both %d.%03d. Voltage scaling disabled\n",
maxvid/1000, maxvid%1000);
maxvid.mV/1000, maxvid.mV%1000);
return;
}
if (vrmrev==0) {
dprintk ("VRM 8.5\n");
memcpy (voltage_table, vrm85scales, sizeof(voltage_table));
numvscales = (voltage_table[maxvid]-voltage_table[minvid])/25;
} else {
dprintk ("Mobile VRM\n");
memcpy (voltage_table, mobilevrmscales, sizeof(voltage_table));
numvscales = (voltage_table[maxvid]-voltage_table[minvid])/5;
printk(KERN_INFO PFX "Max VID=%d.%03d Min VID=%d.%03d, %d possible voltage scales\n",
maxvid.mV/1000, maxvid.mV%1000,
minvid.mV/1000, minvid.mV%1000,
numvscales);
j = 0;
while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) {
speed = longhaul_table[j].frequency;
pos = (speed - lowest_speed) / kHz_step + minvid.pos;
f_msr_table[longhaul_table[j].index].vrm = mV_vrm_table[pos];
j++;
}
/* Current voltage isn't readable at first, so we need to
set it to a known value. The spec says to use maxvid */
longhaul.bits.RevisionKey = longhaul.bits.RevisionID; /* FIXME: This is bad. */
longhaul.bits.EnableSoftVID = 1;
longhaul.bits.SoftVID = maxvid;
wrmsrl (MSR_VIA_LONGHAUL, longhaul.val);
minvid = voltage_table[minvid];
maxvid = voltage_table[maxvid];
dprintk ("Min VID=%d.%03d Max VID=%d.%03d, %d possible voltage scales\n",
maxvid/1000, maxvid%1000, minvid/1000, minvid%1000, numvscales);
can_scale_voltage = 1;
}
......@@ -540,21 +563,33 @@ static acpi_status longhaul_walk_callback(acpi_handle obj_handle,
return 1;
}
/* VIA don't support PM2 reg, but have something similar */
static int enable_arbiter_disable(void)
{
struct pci_dev *dev;
u8 pci_cmd;
/* Find PLE133 host bridge */
dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, NULL);
if (dev != NULL) {
/* Enable access to port 0x22 */
pci_read_config_byte(dev, 0x78, &pci_cmd);
if ( !(pci_cmd & 1<<7) ) {
pci_cmd |= 1<<7;
pci_write_config_byte(dev, 0x78, pci_cmd);
}
return 1;
}
return 0;
}
static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
{
struct cpuinfo_x86 *c = cpu_data;
char *cpuname=NULL;
int ret;
/* Check ACPI support for C3 state */
acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX,
&longhaul_walk_callback, NULL, (void *)&pr);
if (pr == NULL) goto err_acpi;
cx = &pr->power.states[ACPI_STATE_C3];
if (cx->address == 0 || cx->latency > 1000) goto err_acpi;
/* Now check what we have on this motherboard */
/* Check what we have on this motherboard */
switch (c->x86_model) {
case 6:
cpu_model = CPU_SAMUEL;
......@@ -636,12 +671,36 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
break;
};
/* Find ACPI data for processor */
acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX,
&longhaul_walk_callback, NULL, (void *)&pr);
if (pr == NULL)
goto err_acpi;
if (longhaul_version == TYPE_POWERSAVER) {
/* Check ACPI support for C3 state */
cx = &pr->power.states[ACPI_STATE_C3];
if (cx->address == 0 ||
(cx->latency > 1000 && ignore_latency == 0) )
goto err_acpi;
} else {
/* Check ACPI support for bus master arbiter disable */
if (!pr->flags.bm_control) {
if (!enable_arbiter_disable()) {
printk(KERN_ERR PFX "No ACPI support. No VT8601 host bridge. Aborting.\n");
return -ENODEV;
} else
port22_en = 1;
}
}
ret = longhaul_get_ranges();
if (ret != 0)
return ret;
if ((longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) &&
(dont_scale_voltage==0))
(scale_voltage != 0))
longhaul_setup_voltagescaling();
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
......@@ -729,8 +788,10 @@ static void __exit longhaul_exit(void)
kfree(longhaul_table);
}
module_param (dont_scale_voltage, int, 0644);
MODULE_PARM_DESC(dont_scale_voltage, "Don't scale voltage of processor");
module_param (scale_voltage, int, 0644);
MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
module_param(ignore_latency, int, 0644);
MODULE_PARM_DESC(ignore_latency, "Skip ACPI C3 latency test");
MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");
......@@ -738,4 +799,3 @@ MODULE_LICENSE ("GPL");
late_initcall(longhaul_init);
module_exit(longhaul_exit);
......@@ -450,17 +450,45 @@ static int __initdata nehemiah_c_eblcr[32] = {
* Voltage scales. Div/Mod by 1000 to get actual voltage.
* Which scale to use depends on the VRM type in use.
*/
static int __initdata vrm85scales[32] = {
1250, 1200, 1150, 1100, 1050, 1800, 1750, 1700,
1650, 1600, 1550, 1500, 1450, 1400, 1350, 1300,
1275, 1225, 1175, 1125, 1075, 1825, 1775, 1725,
1675, 1625, 1575, 1525, 1475, 1425, 1375, 1325,
struct mV_pos {
unsigned short mV;
unsigned short pos;
};
static struct mV_pos __initdata vrm85_mV[32] = {
{1250, 8}, {1200, 6}, {1150, 4}, {1100, 2},
{1050, 0}, {1800, 30}, {1750, 28}, {1700, 26},
{1650, 24}, {1600, 22}, {1550, 20}, {1500, 18},
{1450, 16}, {1400, 14}, {1350, 12}, {1300, 10},
{1275, 9}, {1225, 7}, {1175, 5}, {1125, 3},
{1075, 1}, {1825, 31}, {1775, 29}, {1725, 27},
{1675, 25}, {1625, 23}, {1575, 21}, {1525, 19},
{1475, 17}, {1425, 15}, {1375, 13}, {1325, 11}
};
static unsigned char __initdata mV_vrm85[32] = {
0x04, 0x14, 0x03, 0x13, 0x02, 0x12, 0x01, 0x11,
0x00, 0x10, 0x0f, 0x1f, 0x0e, 0x1e, 0x0d, 0x1d,
0x0c, 0x1c, 0x0b, 0x1b, 0x0a, 0x1a, 0x09, 0x19,
0x08, 0x18, 0x07, 0x17, 0x06, 0x16, 0x05, 0x15
};
static struct mV_pos __initdata mobilevrm_mV[32] = {
{1750, 31}, {1700, 30}, {1650, 29}, {1600, 28},
{1550, 27}, {1500, 26}, {1450, 25}, {1400, 24},
{1350, 23}, {1300, 22}, {1250, 21}, {1200, 20},
{1150, 19}, {1100, 18}, {1050, 17}, {1000, 16},
{975, 15}, {950, 14}, {925, 13}, {900, 12},
{875, 11}, {850, 10}, {825, 9}, {800, 8},
{775, 7}, {750, 6}, {725, 5}, {700, 4},
{675, 3}, {650, 2}, {625, 1}, {600, 0}
};
static int __initdata mobilevrmscales[32] = {
2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
1600, 1550, 1500, 1450, 1500, 1350, 1300, -1,
1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
1075, 1050, 1025, 1000, 975, 950, 925, -1,
static unsigned char __initdata mV_mobilevrm[32] = {
0x1f, 0x1e, 0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18,
0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x10,
0x0f, 0x0e, 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08,
0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00
};
......@@ -23,6 +23,7 @@
#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
#include <linux/acpi.h>
#include <linux/dmi.h>
#include <acpi/processor.h>
#endif
......@@ -377,6 +378,35 @@ static int centrino_cpu_early_init_acpi(void)
return 0;
}
/*
* Some BIOSes do SW_ANY coordination internally, either set it up in hw
* or do it in BIOS firmware and won't inform about it to OS. If not
* detected, this has a side effect of making CPU run at a different speed
* than OS intended it to run at. Detect it and handle it cleanly.
*/
static int bios_with_sw_any_bug;
static int __init sw_any_bug_found(struct dmi_system_id *d)
{
bios_with_sw_any_bug = 1;
return 0;
}
static struct dmi_system_id sw_any_bug_dmi_table[] = {
{
.callback = sw_any_bug_found,
.ident = "Supermicro Server X6DLP",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
DMI_MATCH(DMI_BIOS_VERSION, "080010"),
DMI_MATCH(DMI_PRODUCT_NAME, "X6DLP"),
},
},
{ }
};
/*
* centrino_cpu_init_acpi - register with ACPI P-States library
*
......@@ -398,14 +428,24 @@ static int centrino_cpu_init_acpi(struct cpufreq_policy *policy)
dprintk(PFX "obtaining ACPI data failed\n");
return -EIO;
}
policy->shared_type = p->shared_type;
/*
* Will let policy->cpus know about dependency only when software
* coordination is required.
*/
if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL ||
policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) {
policy->cpus = p->shared_cpu_map;
}
#ifdef CONFIG_SMP
dmi_check_system(sw_any_bug_dmi_table);
if (bios_with_sw_any_bug && cpus_weight(policy->cpus) == 1) {
policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
policy->cpus = cpu_core_map[cpu];
}
#endif
/* verify the acpi_data */
if (p->state_count <= 1) {
......
......@@ -32,7 +32,7 @@
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, "cpufreq-core", msg)
/**
* The "cpufreq driver" - the arch- or hardware-dependend low
* The "cpufreq driver" - the arch- or hardware-dependent low
* level driver of CPUFreq support, and its spinlock. This lock
* also protects the cpufreq_cpu_data array.
*/
......
......@@ -55,6 +55,10 @@ struct cpu_dbs_info_s {
struct cpufreq_policy *cur_policy;
struct work_struct work;
unsigned int enable;
struct cpufreq_frequency_table *freq_table;
unsigned int freq_lo;
unsigned int freq_lo_jiffies;
unsigned int freq_hi_jiffies;
};
static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info);
......@@ -72,15 +76,15 @@ static DEFINE_MUTEX(dbs_mutex);
static struct workqueue_struct *kondemand_wq;
struct dbs_tuners {
static struct dbs_tuners {
unsigned int sampling_rate;
unsigned int up_threshold;
unsigned int ignore_nice;
};
static struct dbs_tuners dbs_tuners_ins = {
unsigned int powersave_bias;
} dbs_tuners_ins = {
.up_threshold = DEF_FREQUENCY_UP_THRESHOLD,
.ignore_nice = 0,
.powersave_bias = 0,
};
static inline cputime64_t get_cpu_idle_time(unsigned int cpu)
......@@ -96,6 +100,70 @@ static inline cputime64_t get_cpu_idle_time(unsigned int cpu)
return retval;
}
/*
* Find right freq to be set now with powersave_bias on.
* Returns the freq_hi to be used right now and will set freq_hi_jiffies,
* freq_lo, and freq_lo_jiffies in percpu area for averaging freqs.
*/
static unsigned int powersave_bias_target(struct cpufreq_policy *policy,
unsigned int freq_next,
unsigned int relation)
{
unsigned int freq_req, freq_reduc, freq_avg;
unsigned int freq_hi, freq_lo;
unsigned int index = 0;
unsigned int jiffies_total, jiffies_hi, jiffies_lo;
struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, policy->cpu);
if (!dbs_info->freq_table) {
dbs_info->freq_lo = 0;
dbs_info->freq_lo_jiffies = 0;
return freq_next;
}
cpufreq_frequency_table_target(policy, dbs_info->freq_table, freq_next,
relation, &index);
freq_req = dbs_info->freq_table[index].frequency;
freq_reduc = freq_req * dbs_tuners_ins.powersave_bias / 1000;
freq_avg = freq_req - freq_reduc;
/* Find freq bounds for freq_avg in freq_table */
index = 0;
cpufreq_frequency_table_target(policy, dbs_info->freq_table, freq_avg,
CPUFREQ_RELATION_H, &index);
freq_lo = dbs_info->freq_table[index].frequency;
index = 0;
cpufreq_frequency_table_target(policy, dbs_info->freq_table, freq_avg,
CPUFREQ_RELATION_L, &index);
freq_hi = dbs_info->freq_table[index].frequency;
/* Find out how long we have to be in hi and lo freqs */
if (freq_hi == freq_lo) {
dbs_info->freq_lo = 0;
dbs_info->freq_lo_jiffies = 0;
return freq_lo;
}
jiffies_total = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
jiffies_hi = (freq_avg - freq_lo) * jiffies_total;
jiffies_hi += ((freq_hi - freq_lo) / 2);
jiffies_hi /= (freq_hi - freq_lo);
jiffies_lo = jiffies_total - jiffies_hi;
dbs_info->freq_lo = freq_lo;
dbs_info->freq_lo_jiffies = jiffies_lo;
dbs_info->freq_hi_jiffies = jiffies_hi;
return freq_hi;
}
static void ondemand_powersave_bias_init(void)
{
int i;
for_each_online_cpu(i) {
struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, i);
dbs_info->freq_table = cpufreq_frequency_get_table(i);
dbs_info->freq_lo = 0;
}
}
/************************** sysfs interface ************************/
static ssize_t show_sampling_rate_max(struct cpufreq_policy *policy, char *buf)
{
......@@ -124,6 +192,7 @@ static ssize_t show_##file_name \
show_one(sampling_rate, sampling_rate);
show_one(up_threshold, up_threshold);
show_one(ignore_nice_load, ignore_nice);
show_one(powersave_bias, powersave_bias);
static ssize_t store_sampling_rate(struct cpufreq_policy *unused,
const char *buf, size_t count)
......@@ -198,6 +267,27 @@ static ssize_t store_ignore_nice_load(struct cpufreq_policy *policy,
return count;
}
static ssize_t store_powersave_bias(struct cpufreq_policy *unused,
const char *buf, size_t count)
{
unsigned int input;
int ret;
ret = sscanf(buf, "%u", &input);
if (ret != 1)
return -EINVAL;
if (input > 1000)
input = 1000;
mutex_lock(&dbs_mutex);
dbs_tuners_ins.powersave_bias = input;
ondemand_powersave_bias_init();
mutex_unlock(&dbs_mutex);
return count;
}
#define define_one_rw(_name) \
static struct freq_attr _name = \
__ATTR(_name, 0644, show_##_name, store_##_name)
......@@ -205,6 +295,7 @@ __ATTR(_name, 0644, show_##_name, store_##_name)
define_one_rw(sampling_rate);
define_one_rw(up_threshold);
define_one_rw(ignore_nice_load);
define_one_rw(powersave_bias);
static struct attribute * dbs_attributes[] = {
&sampling_rate_max.attr,
......@@ -212,6 +303,7 @@ static struct attribute * dbs_attributes[] = {
&sampling_rate.attr,
&up_threshold.attr,
&ignore_nice_load.attr,
&powersave_bias.attr,
NULL
};
......@@ -234,6 +326,7 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
if (!this_dbs_info->enable)
return;
this_dbs_info->freq_lo = 0;
policy = this_dbs_info->cur_policy;
cur_jiffies = jiffies64_to_cputime64(get_jiffies_64());
total_ticks = (unsigned int) cputime64_sub(cur_jiffies,
......@@ -274,11 +367,18 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
/* Check for frequency increase */
if (load > dbs_tuners_ins.up_threshold) {
/* if we are already at full speed then break out early */
if (policy->cur == policy->max)
return;
__cpufreq_driver_target(policy, policy->max,
CPUFREQ_RELATION_H);
if (!dbs_tuners_ins.powersave_bias) {
if (policy->cur == policy->max)
return;
__cpufreq_driver_target(policy, policy->max,
CPUFREQ_RELATION_H);
} else {
int freq = powersave_bias_target(policy, policy->max,
CPUFREQ_RELATION_H);
__cpufreq_driver_target(policy, freq,
CPUFREQ_RELATION_L);
}
return;
}
......@@ -293,37 +393,64 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
* policy. To be safe, we focus 10 points under the threshold.
*/
if (load < (dbs_tuners_ins.up_threshold - 10)) {
unsigned int freq_next;
freq_next = (policy->cur * load) /
unsigned int freq_next = (policy->cur * load) /
(dbs_tuners_ins.up_threshold - 10);
__cpufreq_driver_target(policy, freq_next, CPUFREQ_RELATION_L);
if (!dbs_tuners_ins.powersave_bias) {
__cpufreq_driver_target(policy, freq_next,
CPUFREQ_RELATION_L);
} else {
int freq = powersave_bias_target(policy, freq_next,
CPUFREQ_RELATION_L);
__cpufreq_driver_target(policy, freq,
CPUFREQ_RELATION_L);
}
}
}
/* Sampling types */
enum {DBS_NORMAL_SAMPLE, DBS_SUB_SAMPLE};
static void do_dbs_timer(void *data)
{
unsigned int cpu = smp_processor_id();
struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, cpu);
/* We want all CPUs to do sampling nearly on same jiffy */
int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
delay -= jiffies % delay;
if (!dbs_info->enable)
return;
lock_cpu_hotplug();
dbs_check_cpu(dbs_info);
unlock_cpu_hotplug();
queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work,
usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
/* Common NORMAL_SAMPLE setup */
INIT_WORK(&dbs_info->work, do_dbs_timer, (void *)DBS_NORMAL_SAMPLE);
if (!dbs_tuners_ins.powersave_bias ||
(unsigned long) data == DBS_NORMAL_SAMPLE) {
lock_cpu_hotplug();
dbs_check_cpu(dbs_info);
unlock_cpu_hotplug();
if (dbs_info->freq_lo) {
/* Setup timer for SUB_SAMPLE */
INIT_WORK(&dbs_info->work, do_dbs_timer,
(void *)DBS_SUB_SAMPLE);
delay = dbs_info->freq_hi_jiffies;
}
} else {
__cpufreq_driver_target(dbs_info->cur_policy,
dbs_info->freq_lo,
CPUFREQ_RELATION_H);
}
queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay);
}
static inline void dbs_timer_init(unsigned int cpu)
{
struct cpu_dbs_info_s *dbs_info = &per_cpu(cpu_dbs_info, cpu);
/* We want all CPUs to do sampling nearly on same jiffy */
int delay = usecs_to_jiffies(dbs_tuners_ins.sampling_rate);
delay -= jiffies % delay;
INIT_WORK(&dbs_info->work, do_dbs_timer, 0);
queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work,
usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
return;
ondemand_powersave_bias_init();
INIT_WORK(&dbs_info->work, do_dbs_timer, NULL);
queue_delayed_work_on(cpu, kondemand_wq, &dbs_info->work, delay);
}
static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
......
......@@ -350,12 +350,10 @@ __init cpufreq_stats_init(void)
}
register_hotcpu_notifier(&cpufreq_stat_cpu_notifier);
lock_cpu_hotplug();
for_each_online_cpu(cpu) {
cpufreq_stat_cpu_callback(&cpufreq_stat_cpu_notifier, CPU_ONLINE,
(void *)(long)cpu);
}
unlock_cpu_hotplug();
return 0;
}
static void
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment