[ARM] 5294/1: Trizeps4 PCMCIA support

Support for Trizeps4 SOM PCMCIA
with ConXS or other baseboards.
with double GPIO-free fixed (sorry!)

replaces 5279/1
Signed-off-by: Jurgen Schindele <linux@schindele.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

drivers/pcmcia/Kconfig

@@ -220,7 +220,7 @@ config PCMCIA_PXA2XX
 	tristate "PXA2xx support"
 	depends on ARM && ARCH_PXA && PCMCIA
 	depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
-		    || MACH_ARMCORE || ARCH_PXA_PALM)
+		    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA)
 	help
 	  Say Y here to include support for the PXA2xx PCMCIA controller
 

drivers/pcmcia/Makefile

@@ -71,6 +71,7 @@ sa1100_cs-$(CONFIG_SA1100_SIMPAD)		+= sa1100_simpad.o
 pxa2xx_cs-$(CONFIG_ARCH_LUBBOCK)		+= pxa2xx_lubbock.o sa1111_generic.o
 pxa2xx_cs-$(CONFIG_MACH_MAINSTONE)		+= pxa2xx_mainstone.o
 pxa2xx_cs-$(CONFIG_PXA_SHARPSL)			+= pxa2xx_sharpsl.o
+pxa2xx_cs-$(CONFIG_TRIZEPS_PCMCIA)		+= pxa2xx_trizeps.o
 pxa2xx_cs-$(CONFIG_MACH_ARMCORE)		+= pxa2xx_cm_x270.o
 pxa2xx_cs-$(CONFIG_MACH_PALMTX)		+= pxa2xx_palmtx.o
 

drivers/pcmcia/pxa2xx_trizeps4.c

+/*
+ * linux/drivers/pcmcia/pxa2xx_trizeps4.c
+ *
+ * TRIZEPS PCMCIA specific routines.
+ *
+ * Author:	Jürgen Schindele
+ * Created:	20 02, 2006
+ * Copyright:	Jürgen Schindele
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/trizeps4.h>
+
+#include "soc_common.h"
+
+extern void board_pcmcia_power(int power);
+
+static struct pcmcia_irqs irqs[] = {
+	{ 0, IRQ_GPIO(GPIO_PCD), "cs0_cd" }
+	/* on other baseboards we can have more inputs */
+};
+
+static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	int ret, i;
+	/* we dont have voltage/card/ready detection
+	 * so we dont need interrupts for it
+	 */
+	switch (skt->nr) {
+	case 0:
+		if (gpio_request(GPIO_PRDY, "cf_irq") < 0) {
+			pr_err("%s: sock %d unable to request gpio %d\n", __func__,
+				skt->nr, GPIO_PRDY);
+			return -EBUSY;
+		}
+		if (gpio_direction_input(GPIO_PRDY) < 0) {
+			pr_err("%s: sock %d unable to set input gpio %d\n", __func__,
+				skt->nr, GPIO_PRDY);
+			gpio_free(GPIO_PRDY);
+			return -EINVAL;
+		}
+		skt->irq = IRQ_GPIO(GPIO_PRDY);
+		break;
+
+#ifndef CONFIG_MACH_TRIZEPS_CONXS
+	case 1:
+#endif
+	default:
+		break;
+	}
+	/* release the reset of this card */
+	pr_debug("%s: sock %d irq %d\n", __func__, skt->nr, skt->irq);
+
+	/* supplementory irqs for the socket */
+	for (i = 0; i < ARRAY_SIZE(irqs); i++) {
+		if (irqs[i].sock != skt->nr)
+			continue;
+		if (gpio_request(IRQ_TO_GPIO(irqs[i].irq), irqs[i].str) < 0) {
+			pr_err("%s: sock %d unable to request gpio %d\n",
+				__func__, skt->nr, IRQ_TO_GPIO(irqs[i].irq));
+			ret = -EBUSY;
+			goto error;
+		}
+		if (gpio_direction_input(IRQ_TO_GPIO(irqs[i].irq)) < 0) {
+			pr_err("%s: sock %d unable to set input gpio %d\n",
+				__func__, skt->nr, IRQ_TO_GPIO(irqs[i].irq));
+			ret = -EINVAL;
+			goto error;
+		}
+	}
+	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+
+error:
+	for (; i >= 0; i--) {
+		gpio_free(IRQ_TO_GPIO(irqs[i].irq));
+	}
+	return (ret);
+}
+
+static void trizeps_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	int i;
+	/* free allocated gpio's */
+	gpio_free(GPIO_PRDY);
+	for (i = 0; i < ARRAY_SIZE(irqs); i++)
+		gpio_free(IRQ_TO_GPIO(irqs[i].irq));
+}
+
+static unsigned long trizeps_pcmcia_status[2];
+
+static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+				struct pcmcia_state *state)
+{
+	unsigned short status = 0, change;
+	status = CFSR_readw();
+	change = (status ^ trizeps_pcmcia_status[skt->nr]) &
+				ConXS_CFSR_BVD_MASK;
+	if (change) {
+		trizeps_pcmcia_status[skt->nr] = status;
+		if (status & ConXS_CFSR_BVD1) {
+			/* enable_irq empty */
+		} else {
+			/* disable_irq empty */
+		}
+	}
+
+	switch (skt->nr) {
+	case 0:
+		/* just fill in fix states */
+		state->detect = gpio_get_value(GPIO_PCD) ? 0 : 1;
+		state->ready  = gpio_get_value(GPIO_PRDY) ? 1 : 0;
+		state->bvd1   = (status & ConXS_CFSR_BVD1) ? 1 : 0;
+		state->bvd2   = (status & ConXS_CFSR_BVD2) ? 1 : 0;
+		state->vs_3v  = (status & ConXS_CFSR_VS1) ? 0 : 1;
+		state->vs_Xv  = (status & ConXS_CFSR_VS2) ? 0 : 1;
+		state->wrprot = 0;	/* not available */
+		break;
+
+#ifndef CONFIG_MACH_TRIZEPS_CONXS
+	/* on ConXS we only have one slot. Second is inactive */
+	case 1:
+		state->detect = 0;
+		state->ready  = 0;
+		state->bvd1   = 0;
+		state->bvd2   = 0;
+		state->vs_3v  = 0;
+		state->vs_Xv  = 0;
+		state->wrprot = 0;
+		break;
+
+#endif
+	}
+}
+
+static int trizeps_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+				const socket_state_t *state)
+{
+	int ret = 0;
+	unsigned short power = 0;
+
+	/* we do nothing here just check a bit */
+	switch (state->Vcc) {
+	case 0:  power &= 0xfc; break;
+	case 33: power |= ConXS_BCR_S0_VCC_3V3; break;
+	case 50:
+		pr_err("%s(): Vcc 5V not supported in socket\n", __func__);
+		break;
+	default:
+		pr_err("%s(): bad Vcc %u\n", __func__, state->Vcc);
+		ret = -1;
+	}
+
+	switch (state->Vpp) {
+	case 0:  power &= 0xf3; break;
+	case 33: power |= ConXS_BCR_S0_VPP_3V3; break;
+	case 120:
+		pr_err("%s(): Vpp 12V not supported in socket\n", __func__);
+		break;
+	default:
+		if (state->Vpp != state->Vcc) {
+			pr_err("%s(): bad Vpp %u\n", __func__, state->Vpp);
+			ret = -1;
+		}
+	}
+
+	switch (skt->nr) {
+	case 0:			 /* we only have 3.3V */
+		board_pcmcia_power(power);
+		break;
+
+#ifndef CONFIG_MACH_TRIZEPS_CONXS
+	/* on ConXS we only have one slot. Second is inactive */
+	case 1:
+#endif
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+static void trizeps_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+	/* default is on */
+	board_pcmcia_power(0x9);
+}
+
+static void trizeps_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+	board_pcmcia_power(0x0);
+}
+
+static struct pcmcia_low_level trizeps_pcmcia_ops = {
+	.owner			= THIS_MODULE,
+	.hw_init		= trizeps_pcmcia_hw_init,
+	.hw_shutdown		= trizeps_pcmcia_hw_shutdown,
+	.socket_state		= trizeps_pcmcia_socket_state,
+	.configure_socket	= trizeps_pcmcia_configure_socket,
+	.socket_init		= trizeps_pcmcia_socket_init,
+	.socket_suspend		= trizeps_pcmcia_socket_suspend,
+#ifdef CONFIG_MACH_TRIZEPS_CONXS
+	.nr			= 1,
+#else
+	.nr			= 2,
+#endif
+	.first			= 0,
+};
+
+static struct platform_device *trizeps_pcmcia_device;
+
+static int __init trizeps_pcmcia_init(void)
+{
+	int ret;
+
+	trizeps_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!trizeps_pcmcia_device)
+		return -ENOMEM;
+
+	ret = platform_device_add_data(trizeps_pcmcia_device,
+			&trizeps_pcmcia_ops, sizeof(trizeps_pcmcia_ops));
+
+	if (ret == 0)
+		ret = platform_device_add(trizeps_pcmcia_device);
+
+	if (ret)
+		platform_device_put(trizeps_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit trizeps_pcmcia_exit(void)
+{
+	int i;
+	platform_device_unregister(trizeps_pcmcia_device);
+}
+
+fs_initcall(trizeps_pcmcia_init);
+module_exit(trizeps_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Juergen Schindele");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");