Commit 312f7da2 authored by Albert Lee's avatar Albert Lee Committed by Jeff Garzik

[PATCH] libata: interrupt driven pio for libata-core

- add PIO_ST_FIRST for the state before sending ATAPI CDB or sending
"ATA PIO data out" first data block.
- add ATA_TFLAG_POLLING and ATA_DFLAG_CDB_INTR flags
- remove the ATA_FLAG_NOINTR flag since the interrupt handler is now
aware of the states
- modify ata_pio_sector() and atapi_pio_bytes() to work in the interrupt
context
- modify the ata_host_intr() to handle PIO interrupts
- modify ata_qc_issue_prot() to initialize states
- atapi_packet_task() changed to handle "ATA PIO data out" first data block
- support the pre-ATA4 ATAPI device which raise interrupt when ready to
receive CDB
Signed-off-by: default avatarAlbert Lee <albertcc@tw.ibm.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@pobox.com>
parent 14be71f4
This diff is collapsed.
......@@ -181,6 +181,7 @@ enum {
ATA_TFLAG_ISADDR = (1 << 1), /* enable r/w to nsect/lba regs */
ATA_TFLAG_DEVICE = (1 << 2), /* enable r/w to device reg */
ATA_TFLAG_WRITE = (1 << 3), /* data dir: host->dev==1 (write) */
ATA_TFLAG_POLLING = (1 << 4), /* set nIEN to 1 and use polling */
};
enum ata_tf_protocols {
......@@ -250,6 +251,8 @@ struct ata_taskfile {
((u64) (id)[(n) + 1] << 16) | \
((u64) (id)[(n) + 0]) )
#define ata_id_cdb_intr(id) (((id)[0] & 0x60) == 0x20)
static inline int atapi_cdb_len(u16 *dev_id)
{
u16 tmp = dev_id[0] & 0x3;
......
......@@ -97,6 +97,7 @@ enum {
ATA_DFLAG_LBA48 = (1 << 0), /* device supports LBA48 */
ATA_DFLAG_PIO = (1 << 1), /* device currently in PIO mode */
ATA_DFLAG_LOCK_SECTORS = (1 << 2), /* don't adjust max_sectors */
ATA_DFLAG_CDB_INTR = (1 << 3), /* device asserts INTRQ when ready for CDB */
ATA_DEV_UNKNOWN = 0, /* unknown device */
ATA_DEV_ATA = 1, /* ATA device */
......@@ -115,8 +116,6 @@ enum {
ATA_FLAG_MMIO = (1 << 6), /* use MMIO, not PIO */
ATA_FLAG_SATA_RESET = (1 << 7), /* use COMRESET */
ATA_FLAG_PIO_DMA = (1 << 8), /* PIO cmds via DMA */
ATA_FLAG_NOINTR = (1 << 9), /* FIXME: Remove this once
* proper HSM is in place. */
ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */
ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */
......@@ -165,6 +164,7 @@ enum hsm_task_states {
HSM_ST_LAST,
HSM_ST_LAST_POLL,
HSM_ST_ERR,
HSM_ST_FIRST,
};
/* forward declarations */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment