net: aquantia: Fix register definitions to linux style

Original driver code had internal registers and masks declarations
in low case and without any prefix.
Here we make all these uppercase and add already used HW_ATL prefix
to recognize these.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c

@@ -381,14 +381,15 @@ static int hw_atl_b0_hw_init(struct aq_hw_s *self, u8 *mac_addr)
 	hw_atl_b0_hw_rss_hash_set(self, &aq_nic_cfg->aq_rss);
 
 	/* Force limit MRRS on RDM/TDM to 2K */
-	val = aq_hw_read_reg(self, pci_reg_control6_adr);
-	aq_hw_write_reg(self, pci_reg_control6_adr, (val & ~0x707) | 0x404);
+	val = aq_hw_read_reg(self, HW_ATL_PCI_REG_CONTROL6_ADR);
+	aq_hw_write_reg(self, HW_ATL_PCI_REG_CONTROL6_ADR,
+			(val & ~0x707) | 0x404);
 
 	/* TX DMA total request limit. B0 hardware is not capable to
 	 * handle more than (8K-MRRS) incoming DMA data.
 	 * Value 24 in 256byte units
 	 */
-	aq_hw_write_reg(self, tx_dma_total_req_limit_adr, 24);
+	aq_hw_write_reg(self, HW_ATL_TX_DMA_TOTAL_REQ_LIMIT_ADR, 24);
 
 	/* Reset link status and read out initial hardware counters */
 	self->aq_link_status.mbps = 0;