Commit 33782dd5 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: conditionally build in PCI driver support

Separate the comedi_pci_* functions out of drivers.c into a new
source file, comedi_pci.c. This allows conditionally building
support for comedi PCI drivers into the comedi core. Fix the
Kconfig and Makefile appropriately.

Group all the comedi_pci_* prototypes and related defines into one
place in comedidev.h. Protect these prototypes with an #ifdef and
provide some dummy functions so that the mixed ISA/PCI comedi
drivers will still build correctly.

Remove the #include <linux/pci.h> from comedidev.h and drivers.c. This
include is only needed by the comedi PCI driver support code and the
PCI drivers. The include should occur in those files.

Also, remove the #include <linux/pci.h> from a couple non-PCI drivers
since it's not needed.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent abac8b54
......@@ -542,11 +542,7 @@ menuconfig COMEDI_PCI_DRIVERS
bool "Comedi PCI drivers"
depends on PCI
---help---
Enable comedi PCI drivers to be built
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about PCI comedi drivers.
Enable support for comedi PCI drivers.
if COMEDI_PCI_DRIVERS
......
comedi-y := comedi_fops.o range.o drivers.o \
comedi_buf.o
comedi-$(CONFIG_COMEDI_PCI_DRIVERS) += comedi_pci.o
comedi-$(CONFIG_COMEDI_USB_DRIVERS) += comedi_usb.o
comedi-$(CONFIG_PROC_FS) += proc.o
comedi-$(CONFIG_COMPAT) += comedi_compat32.o
......
/*
* comedi_pci.c
* Comedi PCI driver specific functions.
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 1997-2000 David A. Schleef <ds@schleef.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/pci.h>
#include "comedidev.h"
/**
* comedi_to_pci_dev() - comedi_device pointer to pci_dev pointer.
* @dev: comedi_device struct
*/
struct pci_dev *comedi_to_pci_dev(struct comedi_device *dev)
{
return dev->hw_dev ? to_pci_dev(dev->hw_dev) : NULL;
}
EXPORT_SYMBOL_GPL(comedi_to_pci_dev);
/**
* comedi_pci_enable() - Enable the PCI device and request the regions.
* @pcidev: pci_dev struct
* @res_name: name for the requested reqource
*/
int comedi_pci_enable(struct pci_dev *pcidev, const char *res_name)
{
int rc;
rc = pci_enable_device(pcidev);
if (rc < 0)
return rc;
rc = pci_request_regions(pcidev, res_name);
if (rc < 0)
pci_disable_device(pcidev);
return rc;
}
EXPORT_SYMBOL_GPL(comedi_pci_enable);
/**
* comedi_pci_disable() - Release the regions and disable the PCI device.
* @pcidev: pci_dev struct
*
* This must be matched with a previous successful call to comedi_pci_enable().
*/
void comedi_pci_disable(struct pci_dev *pcidev)
{
pci_release_regions(pcidev);
pci_disable_device(pcidev);
}
EXPORT_SYMBOL_GPL(comedi_pci_disable);
/**
* comedi_pci_auto_config() - Configure/probe a comedi PCI driver.
* @pcidev: pci_dev struct
* @driver: comedi_driver struct
*
* Typically called from the pci_driver (*probe) function.
*/
int comedi_pci_auto_config(struct pci_dev *pcidev,
struct comedi_driver *driver)
{
return comedi_auto_config(&pcidev->dev, driver, 0);
}
EXPORT_SYMBOL_GPL(comedi_pci_auto_config);
/**
* comedi_pci_auto_unconfig() - Unconfigure/remove a comedi PCI driver.
* @pcidev: pci_dev struct
*
* Typically called from the pci_driver (*remove) function.
*/
void comedi_pci_auto_unconfig(struct pci_dev *pcidev)
{
comedi_auto_unconfig(&pcidev->dev);
}
EXPORT_SYMBOL_GPL(comedi_pci_auto_unconfig);
/**
* comedi_pci_driver_register() - Register a comedi PCI driver.
* @comedi_driver: comedi_driver struct
* @pci_driver: pci_driver struct
*
* This function is used for the module_init() of comedi PCI drivers.
* Do not call it directly, use the module_comedi_pci_driver() helper
* macro instead.
*/
int comedi_pci_driver_register(struct comedi_driver *comedi_driver,
struct pci_driver *pci_driver)
{
int ret;
ret = comedi_driver_register(comedi_driver);
if (ret < 0)
return ret;
ret = pci_register_driver(pci_driver);
if (ret < 0) {
comedi_driver_unregister(comedi_driver);
return ret;
}
return 0;
}
EXPORT_SYMBOL_GPL(comedi_pci_driver_register);
/**
* comedi_pci_driver_unregister() - Unregister a comedi PCI driver.
* @comedi_driver: comedi_driver struct
* @pci_driver: pci_driver struct
*
* This function is used for the module_exit() of comedi PCI drivers.
* Do not call it directly, use the module_comedi_pci_driver() helper
* macro instead.
*/
void comedi_pci_driver_unregister(struct comedi_driver *comedi_driver,
struct pci_driver *pci_driver)
{
pci_unregister_driver(pci_driver);
comedi_driver_unregister(comedi_driver);
}
EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister);
......@@ -40,7 +40,6 @@
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/timer.h>
#include <linux/pci.h>
#include "comedi.h"
......@@ -54,22 +53,6 @@
COMEDI_MINORVERSION, COMEDI_MICROVERSION)
#define COMEDI_RELEASE VERSION
/*
* PCI Vendor IDs not in <linux/pci_ids.h>
*/
#define PCI_VENDOR_ID_KOLTER 0x1001
#define PCI_VENDOR_ID_ICP 0x104c
#define PCI_VENDOR_ID_AMCC 0x10e8
#define PCI_VENDOR_ID_DT 0x1116
#define PCI_VENDOR_ID_IOTECH 0x1616
#define PCI_VENDOR_ID_CONTEC 0x1221
#define PCI_VENDOR_ID_CB 0x1307 /* Measurement Computing */
#define PCI_VENDOR_ID_ADVANTECH 0x13fe
#define PCI_VENDOR_ID_MEILHAUS 0x1402
#define PCI_VENDOR_ID_RTD 0x1435
#define PCI_VENDOR_ID_ADLINK 0x144a
#define PCI_VENDOR_ID_AMPLICON 0x14dc
#define COMEDI_NUM_MINORS 0x100
#define COMEDI_NUM_BOARD_MINORS 0x30
#define COMEDI_FIRST_SUBDEVICE_MINOR COMEDI_NUM_BOARD_MINORS
......@@ -295,26 +278,6 @@ int comedi_driver_unregister(struct comedi_driver *);
module_driver(__comedi_driver, comedi_driver_register, \
comedi_driver_unregister)
int comedi_pci_enable(struct pci_dev *, const char *);
void comedi_pci_disable(struct pci_dev *);
int comedi_pci_driver_register(struct comedi_driver *, struct pci_driver *);
void comedi_pci_driver_unregister(struct comedi_driver *, struct pci_driver *);
/**
* module_comedi_pci_driver() - Helper macro for registering a comedi PCI driver
* @__comedi_driver: comedi_driver struct
* @__pci_driver: pci_driver struct
*
* Helper macro for comedi PCI drivers which do not do anything special
* in module init/exit. This eliminates a lot of boilerplate. Each
* module may only use this macro once, and calling it replaces
* module_init() and module_exit()
*/
#define module_comedi_pci_driver(__comedi_driver, __pci_driver) \
module_driver(__comedi_driver, comedi_pci_driver_register, \
comedi_pci_driver_unregister, &(__pci_driver))
struct pcmcia_driver;
int comedi_pcmcia_driver_register(struct comedi_driver *,
......@@ -424,11 +387,6 @@ static inline void comedi_set_hw_dev(struct comedi_device *dev,
put_device(old_hw_dev);
}
static inline struct pci_dev *comedi_to_pci_dev(struct comedi_device *dev)
{
return dev->hw_dev ? to_pci_dev(dev->hw_dev) : NULL;
}
unsigned int comedi_buf_write_alloc(struct comedi_async *, unsigned int);
unsigned int comedi_buf_write_free(struct comedi_async *, unsigned int);
......@@ -451,13 +409,77 @@ int comedi_auto_config(struct device *hardware_device,
struct comedi_driver *driver, unsigned long context);
void comedi_auto_unconfig(struct device *hardware_device);
static inline int comedi_pci_auto_config(struct pci_dev *pcidev,
struct comedi_driver *driver)
#ifdef CONFIG_COMEDI_PCI_DRIVERS
/* comedi_pci.c - comedi PCI driver specific functions */
/*
* PCI Vendor IDs not in <linux/pci_ids.h>
*/
#define PCI_VENDOR_ID_KOLTER 0x1001
#define PCI_VENDOR_ID_ICP 0x104c
#define PCI_VENDOR_ID_AMCC 0x10e8
#define PCI_VENDOR_ID_DT 0x1116
#define PCI_VENDOR_ID_IOTECH 0x1616
#define PCI_VENDOR_ID_CONTEC 0x1221
#define PCI_VENDOR_ID_CB 0x1307 /* Measurement Computing */
#define PCI_VENDOR_ID_ADVANTECH 0x13fe
#define PCI_VENDOR_ID_MEILHAUS 0x1402
#define PCI_VENDOR_ID_RTD 0x1435
#define PCI_VENDOR_ID_ADLINK 0x144a
#define PCI_VENDOR_ID_AMPLICON 0x14dc
struct pci_dev;
struct pci_driver;
struct pci_dev *comedi_to_pci_dev(struct comedi_device *);
int comedi_pci_enable(struct pci_dev *, const char *);
void comedi_pci_disable(struct pci_dev *);
int comedi_pci_auto_config(struct pci_dev *, struct comedi_driver *);
void comedi_pci_auto_unconfig(struct pci_dev *);
int comedi_pci_driver_register(struct comedi_driver *, struct pci_driver *);
void comedi_pci_driver_unregister(struct comedi_driver *, struct pci_driver *);
/**
* module_comedi_pci_driver() - Helper macro for registering a comedi PCI driver
* @__comedi_driver: comedi_driver struct
* @__pci_driver: pci_driver struct
*
* Helper macro for comedi PCI drivers which do not do anything special
* in module init/exit. This eliminates a lot of boilerplate. Each
* module may only use this macro once, and calling it replaces
* module_init() and module_exit()
*/
#define module_comedi_pci_driver(__comedi_driver, __pci_driver) \
module_driver(__comedi_driver, comedi_pci_driver_register, \
comedi_pci_driver_unregister, &(__pci_driver))
#else
/*
* Some of the comedi mixed ISA/PCI drivers call the PCI specific
* functions. Provide some dummy functions if CONFIG_COMEDI_PCI_DRIVERS
* is not enabled.
*/
static inline struct pci_dev *comedi_to_pci_dev(struct comedi_device *dev)
{
return NULL;
}
static inline int comedi_pci_enable(struct pci_dev *dev, const char *name)
{
return -ENOSYS;
}
static inline void comedi_pci_disable(struct pci_dev *dev)
{
return comedi_auto_config(&pcidev->dev, driver, 0);
}
void comedi_pci_auto_unconfig(struct pci_dev *pcidev);
#endif /* CONFIG_COMEDI_PCI_DRIVERS */
#ifdef CONFIG_COMEDI_USB_DRIVERS
......
......@@ -23,7 +23,6 @@
#include <linux/device.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include <linux/errno.h>
......@@ -496,73 +495,6 @@ void comedi_auto_unconfig(struct device *hardware_device)
}
EXPORT_SYMBOL_GPL(comedi_auto_unconfig);
/**
* comedi_pci_enable() - Enable the PCI device and request the regions.
* @pdev: pci_dev struct
* @res_name: name for the requested reqource
*/
int comedi_pci_enable(struct pci_dev *pdev, const char *res_name)
{
int rc;
rc = pci_enable_device(pdev);
if (rc < 0)
return rc;
rc = pci_request_regions(pdev, res_name);
if (rc < 0)
pci_disable_device(pdev);
return rc;
}
EXPORT_SYMBOL_GPL(comedi_pci_enable);
/**
* comedi_pci_disable() - Release the regions and disable the PCI device.
* @pdev: pci_dev struct
*
* This must be matched with a previous successful call to comedi_pci_enable().
*/
void comedi_pci_disable(struct pci_dev *pdev)
{
pci_release_regions(pdev);
pci_disable_device(pdev);
}
EXPORT_SYMBOL_GPL(comedi_pci_disable);
int comedi_pci_driver_register(struct comedi_driver *comedi_driver,
struct pci_driver *pci_driver)
{
int ret;
ret = comedi_driver_register(comedi_driver);
if (ret < 0)
return ret;
ret = pci_register_driver(pci_driver);
if (ret < 0) {
comedi_driver_unregister(comedi_driver);
return ret;
}
return 0;
}
EXPORT_SYMBOL_GPL(comedi_pci_driver_register);
void comedi_pci_driver_unregister(struct comedi_driver *comedi_driver,
struct pci_driver *pci_driver)
{
pci_unregister_driver(pci_driver);
comedi_driver_unregister(comedi_driver);
}
EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister);
void comedi_pci_auto_unconfig(struct pci_dev *pcidev)
{
comedi_auto_unconfig(&pcidev->dev);
}
EXPORT_SYMBOL_GPL(comedi_pci_auto_unconfig);
#if IS_ENABLED(CONFIG_PCMCIA)
int comedi_pcmcia_driver_register(struct comedi_driver *comedi_driver,
struct pcmcia_driver *pcmcia_driver)
......
......@@ -54,6 +54,8 @@ Interrupt support for these boards is also not currently supported.
Configuration Options: not applicable, uses PCI auto config
*/
#include <linux/pci.h>
#include "../comedidev.h"
#include "8255.h"
......
#include <linux/pci.h>
#include "../comedidev.h"
#include "comedi_fc.h"
#include "amcc_s5933.h"
......
......@@ -29,6 +29,7 @@
* source code.
*/
#include <linux/pci.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
......
#include <linux/pci.h>
#include "../comedidev.h"
#include "comedi_fc.h"
#include "amcc_s5933.h"
......
......@@ -29,6 +29,8 @@
* this source code.
*/
#include <linux/pci.h>
#include "../comedidev.h"
#include "addi_watchdog.h"
#include "comedi_fc.h"
......
#include <linux/pci.h>
#include "../comedidev.h"
#include "comedi_fc.h"
#include "amcc_s5933.h"
......
......@@ -29,6 +29,8 @@
* this source code.
*/
#include <linux/pci.h>
#include "../comedidev.h"
/*
......
#include <linux/pci.h>
#include <asm/i387.h>
#include "../comedidev.h"
......
......@@ -29,6 +29,7 @@
* this source code.
*/
#include <linux/pci.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
......
......@@ -29,6 +29,8 @@
* this source code.
*/
#include <linux/pci.h>
#include "../comedidev.h"
#include "addi_watchdog.h"
......
#include <linux/pci.h>
#include "../comedidev.h"
#include "comedi_fc.h"
#include "amcc_s5933.h"
......
#include <linux/pci.h>
#include <asm/i387.h>
#include "../comedidev.h"
......
......@@ -29,6 +29,7 @@
* this source code.
*/
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
......
#include <linux/pci.h>
#include "../comedidev.h"
#include "comedi_fc.h"
#include "amcc_s5933.h"
......
......@@ -42,6 +42,8 @@ Configuration Options: not applicable, uses PCI auto config
- adl_pci9118.c
*/
#include <linux/pci.h>
#include "../comedidev.h"
/*
......
......@@ -54,6 +54,8 @@ driver.
Configuration Options: not applicable
*/
#include <linux/pci.h>
#include "../comedidev.h"
/*
......
......@@ -30,9 +30,11 @@ Updated: Mon, 14 Apr 2008 15:10:32 +0100
Configuration Options: not applicable, uses PCI auto config
*/
#include "../comedidev.h"
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include "../comedidev.h"
#include "comedi_fc.h"
#include "8253.h"
......
......@@ -68,11 +68,12 @@ a multiple of chanlist_len*convert_arg.
*/
#include "../comedidev.h"
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
#include "8253.h"
#include "comedi_fc.h"
......
......@@ -76,13 +76,15 @@ Configuration options:
* attachment if necessary, and possibly to set other options supported by
* manual attachment.
*/
#include "../comedidev.h"
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/gfp.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include "../comedidev.h"
#include "amcc_s5933.h"
#include "8253.h"
#include "comedi_fc.h"
......
......@@ -41,6 +41,7 @@ Configuration options:
device will be used.
*/
#include <linux/pci.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
......
......@@ -48,6 +48,8 @@ configures all channels in the same group.
3. Implement calibration.
*/
#include <linux/pci.h>
#include "../comedidev.h"
/* all the registers for the pci1723 board */
......
......@@ -29,10 +29,11 @@ Configuration options:
*/
#include "../comedidev.h"
#include <linux/pci.h>
#include <linux/delay.h>
#include "../comedidev.h"
#include "8255.h"
#include "8253.h"
......
......@@ -258,6 +258,7 @@
* order they appear in the channel list.
*/
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
......
......@@ -52,6 +52,7 @@ the IRQ jumper. If no interrupt is connected, then subdevice 1 is
unused.
*/
#include <linux/pci.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
......
......@@ -44,6 +44,8 @@ connected to a reed-relay. Relay contacts are closed when output is 1.
The state of the outputs can be read.
*/
#include <linux/pci.h>
#include "../comedidev.h"
#define PC263_DRIVER_NAME "amplc_pc263"
......
......@@ -103,6 +103,7 @@ Passing a zero for an option is the same as leaving it unspecified.
correctly.
*/
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
......
......@@ -188,11 +188,12 @@ Support for PCI230+/260+, more triggered scan functionality, and workarounds
for (or detection of) various hardware problems added by Ian Abbott.
*/
#include "../comedidev.h"
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
#include "comedi_fc.h"
#include "8253.h"
#include "8255.h"
......
......@@ -67,10 +67,12 @@ AI Triggering:
analog triggering on 1602 series
*/
#include "../comedidev.h"
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
#include "8253.h"
#include "8255.h"
#include "amcc_s5933.h"
......
......@@ -87,10 +87,12 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include "../comedidev.h"
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
#include "8253.h"
#include "8255.h"
#include "plx9080.h"
......
......@@ -41,6 +41,8 @@
* Only simple analog output writing is supported.
*/
#include <linux/pci.h>
#include "../comedidev.h"
#include "comedi_fc.h"
......
......@@ -40,11 +40,12 @@ No interrupts, multi channel or FIFO AI, although the card looks like it could s
See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more details.
*/
#include "../comedidev.h"
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
#include "plx9052.h"
#include "8255.h"
......
......@@ -79,6 +79,8 @@ Configuration Options: not applicable, uses PCI auto config
-Calin Culianu <calin@ajvar.org>
*/
#include <linux/pci.h>
#include "../comedidev.h"
#include "8255.h"
......
......@@ -30,6 +30,8 @@ Status: works
Configuration Options: not applicable, uses comedi PCI auto config
*/
#include <linux/pci.h>
#include "../comedidev.h"
#define PCI_DEVICE_ID_PIO1616L 0x8172
......
......@@ -107,12 +107,13 @@ Configuration options: not applicable, uses PCI auto config
*/
#include "../comedidev.h"
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/firmware.h>
#include "../comedidev.h"
#include "8255.h"
#define DAQBOARD2000_FIRMWARE "daqboard2000_firmware.bin"
......
......@@ -51,10 +51,11 @@
* driver.
*/
#include "../comedidev.h"
#include <linux/pci.h>
#include <linux/delay.h>
#include "../comedidev.h"
#include "8255.h"
#include "8253.h"
#include "das08.h"
......
......@@ -46,12 +46,11 @@ Options (for pcm-das08):
Command support does not exist, but could be added for this board.
*/
#include "../comedidev.h"
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include "../comedidev.h"
#include "das08.h"
/* pcmcia includes */
......
......@@ -82,7 +82,9 @@ www.measurementcomputing.com
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <asm/dma.h>
#include "../comedidev.h"
#include "8253.h"
......
......@@ -55,9 +55,11 @@ AO commands are not supported.
#define DEBUG 1
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
#include <linux/delay.h>
#include "comedi_fc.h"
......
......@@ -37,9 +37,11 @@
their cards in their manuals.
*/
#include "../comedidev.h"
#include <linux/pci.h>
#include <linux/mutex.h>
#include "../comedidev.h"
#define READ_TIMEOUT 50
static const struct comedi_lrange range_pci1050_ai = { 3, {
......
......@@ -47,9 +47,11 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
#include <linux/delay.h>
#include "plx9080.h"
#include "comedi_fc.h"
......
......@@ -47,11 +47,11 @@ There are 4 x 12-bit Analogue Outputs. Ranges : 5V, 10V, +/-5V, +/-10V
Configuration options: not applicable, uses PCI auto config
*/
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
#include <linux/delay.h>
#include <linux/pci.h>
#include "../comedidev.h"
#define PCI_DEVICE_ID_ICP_MULTI 0x8000
......
......@@ -42,15 +42,17 @@
* comedi_nonfree_firmware tarball. The file is called "jr3pci.idm".
*/
#include "../comedidev.h"
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ctype.h>
#include <linux/firmware.h>
#include <linux/jiffies.h>
#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/kernel.h>
#include "../comedidev.h"
#include "jr3_pci.h"
#define PCI_VENDOR_ID_JR3 0x1762
......
......@@ -34,6 +34,8 @@ This driver is a simple driver to read the counter values from
Kolter Electronic PCI Counter Card.
*/
#include <linux/pci.h>
#include "../comedidev.h"
#define CNT_CARD_DEVICE_ID 0x0014
......
......@@ -45,13 +45,14 @@ broken.
*/
#include <linux/interrupt.h>
#include "../comedidev.h"
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include "../comedidev.h"
#include "comedi_fc.h"
#include "8253.h"
......
......@@ -34,9 +34,11 @@
* Analog Input, Analog Output, Digital I/O
*/
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/firmware.h>
#include "../comedidev.h"
#define ME2600_FIRMWARE "me2600_firmware.bin"
......
......@@ -51,11 +51,12 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include "mite.h"
#include <linux/pci.h>
#include "comedi_fc.h"
#include "../comedidev.h"
#include "comedi_fc.h"
#include "mite.h"
#define PCI_MITE_SIZE 4096
#define PCI_DAQ_SIZE 4096
......
......@@ -41,7 +41,9 @@ Updated: Sat, 25 Jan 2003 13:24:40 -0800
#define DEBUG 1
#define DEBUG_FLAGS
#include <linux/pci.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
#include "comedi_fc.h"
......
......@@ -50,8 +50,11 @@ except maybe the 6514.
#define DEBUG 1
#define DEBUG_FLAGS
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include "../comedidev.h"
#include "comedi_fc.h"
......
......@@ -40,8 +40,11 @@ DAQ 6601/6602 User Manual (NI 322137B-01)
*/
#include <linux/pci.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
#include "mite.h"
#include "ni_tio.h"
......
......@@ -41,8 +41,10 @@ Commands are not supported.
*/
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include "../comedidev.h"
#include "mite.h"
......
......@@ -73,12 +73,14 @@ NI manuals:
*/
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/delay.h>
#include "../comedidev.h"
#include <linux/delay.h>
#include <asm/dma.h>
#include "8253.h"
......
......@@ -55,9 +55,11 @@ comedi_nonfree_firmware tarball available from http://www.comedi.org
/* #define DEBUG 1 */
/* #define DEBUG_FLAGS */
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/firmware.h>
#include "../comedidev.h"
#include "comedi_fc.h"
......
......@@ -110,10 +110,12 @@ SCXI is probably broken for m-series boards.
*/
#include <linux/delay.h>
#include <linux/delay.h>
#include "../comedidev.h"
#include <asm/byteorder.h>
#include <linux/delay.h>
#include "ni_stc.h"
#include "mite.h"
......
......@@ -53,8 +53,6 @@ Configuration Options:
#include "../comedidev.h"
#include <linux/pci.h> /* for PCI devices */
#define CHANS 8
#define IOSIZE 16
#define LSB(x) ((unsigned char)((x) & 0xff))
......
......@@ -78,9 +78,9 @@ Configuration Options:
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include "../comedidev.h"
#include "comedi_fc.h"
/* This stuff is all from pcmuio.c -- it refers to the DIO subdevices only */
......
......@@ -77,9 +77,9 @@ Configuration Options:
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include "../comedidev.h"
#include "comedi_fc.h"
#define CHANS_PER_PORT 8
......
......@@ -101,8 +101,9 @@ Configuration options:
*/
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include "../comedidev.h"
......
......@@ -64,6 +64,7 @@ INSN_CONFIG instructions:
comedi_do_insn(cf,&insn); //executing configuration
*/
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/types.h>
......
......@@ -72,9 +72,9 @@ Configuration Options:
* options that are used with comedi_config.
*/
#include "../comedidev.h"
#include <linux/pci.h>
#include <linux/pci.h> /* for PCI devices */
#include "../comedidev.h"
#include "comedi_fc.h"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment