Commit 36a90f26 authored by Greg Ungerer's avatar Greg Ungerer Committed by Linus Torvalds

m68knommu: switch 68328 timer to use GENERIC_TIME

Switch the 68328 CPU timer code to using GENERIC_TIME.
Signed-off-by: default avatarGreg Ungerer <gerg@uclinux.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent f6efaf62
......@@ -19,6 +19,7 @@
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/clocksource.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/pgtable.h>
......@@ -51,6 +52,19 @@
#define TICKS_PER_JIFFY 10
#endif
static u32 m68328_tick_cnt;
/***************************************************************************/
static irqreturn_t hw_tick(int irq, void *dummy)
{
/* Reset Timer1 */
TSTAT &= 0;
m68328_tick_cnt += TICKS_PER_JIFFY;
return arch_timer_interrupt(irq, dummy);
}
/***************************************************************************/
static irqreturn_t hw_tick(int irq, void *dummy)
......@@ -69,6 +83,33 @@ static struct irqaction m68328_timer_irq = {
.handler = hw_tick,
};
/***************************************************************************/
static cycle_t m68328_read_clk(void)
{
unsigned long flags;
u32 cycles;
local_irq_save(flags);
cycles = m68328_tick_cnt + TCN;
local_irq_restore(flags);
return cycles;
}
/***************************************************************************/
static struct clocksource m68328_clk = {
.name = "timer",
.rating = 250,
.read = m68328_read_clk,
.shift = 20,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/***************************************************************************/
void hw_timer_init(void)
{
/* disable timer 1 */
......@@ -84,19 +125,8 @@ void hw_timer_init(void)
/* Enable timer 1 */
TCTL |= TCTL_TEN;
}
/***************************************************************************/
unsigned long hw_timer_offset(void)
{
unsigned long ticks = TCN, offset = 0;
/* check for pending interrupt */
if (ticks < (TICKS_PER_JIFFY >> 1) && (ISR & (1 << TMR_IRQ_NUM)))
offset = 1000000 / HZ;
ticks = (ticks * 1000000 / HZ) / TICKS_PER_JIFFY;
return ticks + offset;
m68328_clk.mult = clocksource_hz2mult(TICKS_PER_JIFFY*HZ, m68328_clk.shift);
clocksource_register(&m68328_clk);
}
/***************************************************************************/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment