Merge tag 'hisi-arm64-dt-for-4.16-v2' of git://github.com/hisilicon/linux-hisi into next/dt

ARM64: DT: Hisilicon SoC DT updates for 4.16

- Add SD card support for the hi3798cv200-poplar board
- Replace the PMU node with exact match for the hi3660 SoC
- Add cpu capacity-dmips-mhz information for the hi3660 SoC

* tag 'hisi-arm64-dt-for-4.16-v2' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hisilicon: Add hi3660 cpu capacity-dmips-mhz information
  arm64: dts: hi3660: improve pmu description
  arm64: dts: hi3798cv200: add SD card support
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm64/boot/dts/hisilicon/hi3660.dtsi

@@ -61,6 +61,7 @@ cpu0: cpu@0 {
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <592>;
 		};
 
 		cpu1: cpu@1 {
@@ -70,6 +71,7 @@ cpu1: cpu@1 {
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <592>;
 		};
 
 		cpu2: cpu@2 {
@@ -79,6 +81,7 @@ cpu2: cpu@2 {
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <592>;
 		};
 
 		cpu3: cpu@3 {
@@ -88,6 +91,7 @@ cpu3: cpu@3 {
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <592>;
 		};
 
 		cpu4: cpu@100 {
@@ -101,6 +105,7 @@ &CPU_NAP
 					&CPU_SLEEP
 					&CLUSTER_SLEEP_1
 			>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		cpu5: cpu@101 {
@@ -114,6 +119,7 @@ &CPU_NAP
 					&CPU_SLEEP
 					&CLUSTER_SLEEP_1
 			>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		cpu6: cpu@102 {
@@ -127,6 +133,7 @@ &CPU_NAP
 					&CPU_SLEEP
 					&CLUSTER_SLEEP_1
 			>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		cpu7: cpu@103 {
@@ -140,6 +147,7 @@ &CPU_NAP
 					&CPU_SLEEP
 					&CLUSTER_SLEEP_1
 			>;
+			capacity-dmips-mhz = <1024>;
 		};
 
 		idle-states {
@@ -203,21 +211,25 @@ gic: interrupt-controller@e82b0000 {
 					 IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
-	pmu {
-		compatible = "arm,armv8-pmuv3";
+	a53-pmu {
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>,
 				     <&cpu1>,
 				     <&cpu2>,
-				     <&cpu3>,
-				     <&cpu4>,
+				     <&cpu3>;
+	};
+
+	a73-pmu {
+		compatible = "arm,cortex-a73-pmu";
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu4>,
 				     <&cpu5>,
 				     <&cpu6>,
 				     <&cpu7>;

arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts

@@ -146,6 +146,12 @@ &ir {
 	status = "okay";
 };
 
+&sd0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	status = "okay";
+};
+
 &spi0 {
 	status = "okay";
 	label = "LS-SPI0";

arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi

@@ -192,6 +192,18 @@ spi0: spi@8b1a000 {
 			status = "disabled";
 		};
 
+		sd0: mmc@9820000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x9820000 0x10000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_SDIO0_CIU_CLK>,
+				 <&crg HISTB_SDIO0_BIU_CLK>;
+			clock-names = "ciu", "biu";
+			resets = <&crg 0x9c 4>;
+			reset-names = "reset";
+			status = "disabled";
+		};
+
 		emmc: mmc@9830000 {
 			compatible = "snps,dw-mshc";
 			reg = <0x9830000 0x10000>;