Commit 36e83a18 authored by Zhao Yakui's avatar Zhao Yakui Committed by Eric Anholt

drm/i915: Add the support of eDP on DP-D for Ibex/CPT

This one adds support for eDP that connected on PCH DP-D port
instead of CPU DP-A port, and only DP-D port could be used for eDP.

https://bugs.freedesktop.org/show_bug.cgi?id=27220Signed-off-by: default avatarZhao Yakui <yakui.zhao@intel.com>
Tested-by: default avatarJan-Hendrik Zab <jan@jhz.name>
Tested-by: default avatarTemplar <templar@rshc.de>
Signed-off-by: default avatarZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: default avatarEric Anholt <eric@anholt.net>
parent d874bcff
......@@ -3452,7 +3452,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
temp |= PIPE_8BPC;
else
temp |= PIPE_6BPC;
} else if (is_edp) {
} else if (is_edp || (is_dp && intel_pch_has_edp(crtc))) {
switch (dev_priv->edp_bpp/3) {
case 8:
temp |= PIPE_8BPC;
......
......@@ -43,6 +43,7 @@
#define DP_LINK_CONFIGURATION_SIZE 9
#define IS_eDP(i) ((i)->type == INTEL_OUTPUT_EDP)
#define IS_PCH_eDP(dp_priv) ((dp_priv)->has_edp)
struct intel_dp_priv {
uint32_t output_reg;
......@@ -56,6 +57,7 @@ struct intel_dp_priv {
struct intel_encoder *intel_encoder;
struct i2c_adapter adapter;
struct i2c_algo_dp_aux_data algo;
bool has_edp;
};
static void
......@@ -128,8 +130,9 @@ intel_dp_link_required(struct drm_device *dev,
struct intel_encoder *intel_encoder, int pixel_clock)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
if (IS_eDP(intel_encoder))
if (IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv))
return (pixel_clock * dev_priv->edp_bpp) / 8;
else
return pixel_clock * 3;
......@@ -563,14 +566,14 @@ intel_reduce_ratio(uint32_t *num, uint32_t *den)
}
static void
intel_dp_compute_m_n(int bytes_per_pixel,
intel_dp_compute_m_n(int bpp,
int nlanes,
int pixel_clock,
int link_clock,
struct intel_dp_m_n *m_n)
{
m_n->tu = 64;
m_n->gmch_m = pixel_clock * bytes_per_pixel;
m_n->gmch_m = (pixel_clock * bpp) >> 3;
m_n->gmch_n = link_clock * nlanes;
intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
m_n->link_m = pixel_clock;
......@@ -578,6 +581,28 @@ intel_dp_compute_m_n(int bytes_per_pixel,
intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
}
bool intel_pch_has_edp(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_encoder *encoder;
list_for_each_entry(encoder, &mode_config->encoder_list, head) {
struct intel_encoder *intel_encoder;
struct intel_dp_priv *dp_priv;
if (!encoder || encoder->crtc != crtc)
continue;
intel_encoder = enc_to_intel_encoder(encoder);
dp_priv = intel_encoder->dev_priv;
if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT)
return dp_priv->has_edp;
}
return false;
}
void
intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
......@@ -587,7 +612,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct drm_encoder *encoder;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int lane_count = 4;
int lane_count = 4, bpp = 24;
struct intel_dp_m_n m_n;
/*
......@@ -605,6 +630,8 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT) {
lane_count = dp_priv->lane_count;
if (IS_PCH_eDP(dp_priv))
bpp = dev_priv->edp_bpp;
break;
}
}
......@@ -614,7 +641,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
* the number of bytes_per_pixel post-LUT, which we always
* set up for 8-bits of R/G/B, or 3 bytes total.
*/
intel_dp_compute_m_n(3, lane_count,
intel_dp_compute_m_n(bpp, lane_count,
mode->clock, adjusted_mode->clock, &m_n);
if (HAS_PCH_SPLIT(dev)) {
......@@ -751,13 +778,13 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode)
if (mode != DRM_MODE_DPMS_ON) {
if (dp_reg & DP_PORT_EN) {
intel_dp_link_down(intel_encoder, dp_priv->DP);
if (IS_eDP(intel_encoder))
if (IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv))
ironlake_edp_backlight_off(dev);
}
} else {
if (!(dp_reg & DP_PORT_EN)) {
intel_dp_link_train(intel_encoder, dp_priv->DP, dp_priv->link_configuration);
if (IS_eDP(intel_encoder))
if (IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv))
ironlake_edp_backlight_on(dev);
}
}
......@@ -1291,6 +1318,7 @@ static int intel_dp_get_modes(struct drm_connector *connector)
struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
struct drm_device *dev = intel_encoder->enc.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
int ret;
/* We should parse the EDID data and find out if it has an audio sink
......@@ -1301,7 +1329,7 @@ static int intel_dp_get_modes(struct drm_connector *connector)
return ret;
/* if eDP has no EDID, try to use fixed panel mode from VBT */
if (IS_eDP(intel_encoder)) {
if (IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv)) {
if (dev_priv->panel_fixed_mode != NULL) {
struct drm_display_mode *mode;
mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
......@@ -1386,6 +1414,26 @@ intel_trans_dp_port_sel (struct drm_crtc *crtc)
return -1;
}
/* check the VBT to see whether the eDP is on DP-D port */
static bool intel_dpd_is_edp(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct child_device_config *p_child;
int i;
if (!dev_priv->child_dev_num)
return false;
for (i = 0; i < dev_priv->child_dev_num; i++) {
p_child = dev_priv->child_dev + i;
if (p_child->dvo_port == PORT_IDPD &&
p_child->device_type == DEVICE_TYPE_eDP)
return true;
}
return false;
}
void
intel_dp_init(struct drm_device *dev, int output_reg)
{
......@@ -1431,6 +1479,11 @@ intel_dp_init(struct drm_device *dev, int output_reg)
if (IS_eDP(intel_encoder))
intel_encoder->clone_mask = (1 << INTEL_EDP_CLONE_BIT);
if (HAS_PCH_SPLIT(dev) && (output_reg == PCH_DP_D)) {
if (intel_dpd_is_edp(dev))
dp_priv->has_edp = true;
}
intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = true;
connector->doublescan_allowed = 0;
......@@ -1479,7 +1532,7 @@ intel_dp_init(struct drm_device *dev, int output_reg)
intel_encoder->ddc_bus = &dp_priv->adapter;
intel_encoder->hot_plug = intel_dp_hot_plug;
if (output_reg == DP_A) {
if (output_reg == DP_A || IS_PCH_eDP(dp_priv)) {
/* initialize panel mode from VBT if available for eDP */
if (dev_priv->lfp_lvds_vbt_mode) {
dev_priv->panel_fixed_mode =
......
......@@ -179,6 +179,7 @@ extern void intel_dp_init(struct drm_device *dev, int dp_reg);
void
intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
extern bool intel_pch_has_edp(struct drm_crtc *crtc);
extern void intel_edp_link_config (struct intel_encoder *, int *, int *);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment