[PATCH] New PowerPC 4xx on-chip ethernet controller driver

This patch replaces current PowerPC 4xx EMAC driver with
new, re-written from the scratch version. This patch is quite big
(~234K) because there is virtualy 0% of common code between old and
new version.

New driver uses NAPI, it solves stability problems under heavy packet
load and low memory, corrects chip register access and fixes numerous
small bugs I don't even remember now.

This patch has been tested on all supported in 2.6 PPC 4xx boards.
It's been used in production for almost a year now on custom
4xx hardware. PPC32 specific parts are already upstream.

Patch was acked by the current EMAC driver maintainer (Matt Porter). I
will be maintaining this new version.
Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
--

 Kconfig                   |   72
 ibm_emac/Makefile         |   13
 ibm_emac/ibm_emac.h       |  418 +++--
 ibm_emac/ibm_emac_core.c  | 3414 ++++++++++++++++++++++++----------------------
 ibm_emac/ibm_emac_core.h  |  313 ++--
 ibm_emac/ibm_emac_debug.c |  377 ++---
 ibm_emac/ibm_emac_debug.h |   63
 ibm_emac/ibm_emac_mal.c   |  674 +++++----
 ibm_emac/ibm_emac_mal.h   |  336 +++-
 ibm_emac/ibm_emac_phy.c   |  335 ++--
 ibm_emac/ibm_emac_phy.h   |  105 -
 ibm_emac/ibm_emac_rgmii.c |  201 ++
 ibm_emac/ibm_emac_rgmii.h |   68
 ibm_emac/ibm_emac_tah.c   |  111 +
 ibm_emac/ibm_emac_tah.h   |   96 -
 ibm_emac/ibm_emac_zmii.c  |  255 +++
 ibm_emac/ibm_emac_zmii.h  |  114 -
 17 files changed, 4114 insertions(+), 2851 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

drivers/net/Kconfig

@@ -1163,38 +1163,74 @@ config IBMVETH
 	  be called ibmveth.
 
 config IBM_EMAC
-	bool "IBM PPC4xx EMAC driver support"
+	tristate "PowerPC 4xx on-chip Ethernet support"
 	depends on 4xx
-	select CRC32
-	---help---
-	  This driver supports the IBM PPC4xx EMAC family of on-chip
-	  Ethernet controllers.
-
-config IBM_EMAC_ERRMSG
-	bool "Verbose error messages"
-	depends on IBM_EMAC && BROKEN
+	help
+	  This driver supports the PowerPC 4xx EMAC family of on-chip
+          Ethernet controllers.
 
 config IBM_EMAC_RXB
 	int "Number of receive buffers"
 	depends on IBM_EMAC
-	default "128" if IBM_EMAC4
-	default "64"
+	default "128"
 
 config IBM_EMAC_TXB
 	int "Number of transmit buffers"
 	depends on IBM_EMAC
-	default "128" if IBM_EMAC4
-	default "8"
+	default "64"
+
+config IBM_EMAC_POLL_WEIGHT
+	int "MAL NAPI polling weight"
+	depends on IBM_EMAC
+	default "32"
 
-config IBM_EMAC_FGAP
-	int "Frame gap"
+config IBM_EMAC_RX_COPY_THRESHOLD
+	int "RX skb copy threshold (bytes)"
 	depends on IBM_EMAC
-	default "8"
+	default "256"
 
-config IBM_EMAC_SKBRES
-	int "Skb reserve amount"
+config IBM_EMAC_RX_SKB_HEADROOM
+	int "Additional RX skb headroom (bytes)"
 	depends on IBM_EMAC
 	default "0"
+	help
+	  Additional receive skb headroom. Note, that driver
+	  will always reserve at least 2 bytes to make IP header
+	  aligned, so usualy there is no need to add any additional
+	  headroom.
+	  
+	  If unsure, set to 0.
+
+config IBM_EMAC_PHY_RX_CLK_FIX
+	bool "PHY Rx clock workaround"
+	depends on IBM_EMAC && (405EP || 440GX || 440EP)
+	help
+	  Enable this if EMAC attached to a PHY which doesn't generate
+	  RX clock if there is no link, if this is the case, you will 
+	  see "TX disable timeout" or "RX disable timeout" in the system
+	  log.
+	  
+	  If unsure, say N.
+
+config IBM_EMAC_DEBUG
+	bool "Debugging"
+	depends on IBM_EMAC
+	default n
+
+config IBM_EMAC_ZMII
+	bool
+	depends on IBM_EMAC && (NP405H || NP405L || 44x)
+	default y
+
+config IBM_EMAC_RGMII
+	bool
+	depends on IBM_EMAC && 440GX
+	default y
+		
+config IBM_EMAC_TAH
+	bool
+	depends on IBM_EMAC && 440GX
+	default y
 
 config NET_PCI
 	bool "EISA, VLB, PCI and on board controllers"

drivers/net/ibm_emac/Makefile

 #
-# Makefile for the IBM PPC4xx EMAC controllers
+# Makefile for the PowerPC 4xx on-chip ethernet driver
 #
 
 obj-$(CONFIG_IBM_EMAC) += ibm_emac.o
 
-ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o
-
-# Only need this if you want to see additional debug messages
-ifeq ($(CONFIG_IBM_EMAC_ERRMSG), y)
-ibm_emac-objs += ibm_emac_debug.o
-endif
+ibm_emac-objs := ibm_emac_mal.o ibm_emac_core.o ibm_emac_phy.o 
+ibm_emac-$(CONFIG_IBM_EMAC_ZMII) += ibm_emac_zmii.o
+ibm_emac-$(CONFIG_IBM_EMAC_RGMII) += ibm_emac_rgmii.o
+ibm_emac-$(CONFIG_IBM_EMAC_TAH) += ibm_emac_tah.o
+ibm_emac-$(CONFIG_IBM_EMAC_DEBUG) += ibm_emac_debug.o

drivers/net/ibm_emac/ibm_emac_core.h

 /*
- * ibm_emac_core.h
+ * drivers/net/ibm_emac/ibm_emac_core.h
  *
- * Ethernet driver for the built in ethernet on the IBM 405 PowerPC
- * processor.
+ * Driver for PowerPC 4xx on-chip ethernet controller.
  *
- *      Armin Kuster akuster@mvista.com
- *      Sept, 2001
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
  *
- *      Orignial driver
- *         Johnnie Peters
- *         jpeters@mvista.com
- *
- * Copyright 2000 MontaVista Softare Inc.
+ * Based on original work by
+ *      Armin Kuster <akuster@mvista.com>
+ * 	Johnnie Peters <jpeters@mvista.com>
+ *      Copyright 2000, 2001 MontaVista Softare Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
+ *
  */
+#ifndef __IBM_EMAC_CORE_H_
+#define __IBM_EMAC_CORE_H_
 
-#ifndef _IBM_EMAC_CORE_H_
-#define _IBM_EMAC_CORE_H_
-
+#include <linux/config.h>
 #include <linux/netdevice.h>
+#include <linux/dma-mapping.h>
 #include <asm/ocp.h>
-#include <asm/mmu.h>		/* For phys_addr_t */
 
 #include "ibm_emac.h"
 #include "ibm_emac_phy.h"
-#include "ibm_emac_rgmii.h"
 #include "ibm_emac_zmii.h"
+#include "ibm_emac_rgmii.h"
 #include "ibm_emac_mal.h"
 #include "ibm_emac_tah.h"
 
-#ifndef CONFIG_IBM_EMAC_TXB
-#define NUM_TX_BUFF		64
-#define NUM_RX_BUFF		64
-#else
-#define NUM_TX_BUFF		CONFIG_IBM_EMAC_TXB
-#define NUM_RX_BUFF		CONFIG_IBM_EMAC_RXB
-#endif
+#define NUM_TX_BUFF			CONFIG_IBM_EMAC_TXB
+#define NUM_RX_BUFF			CONFIG_IBM_EMAC_RXB
 
-/* This does 16 byte alignment, exactly what we need.
- * The packet length includes FCS, but we don't want to
- * include that when passing upstream as it messes up
- * bridging applications.
- */
-#ifndef CONFIG_IBM_EMAC_SKBRES
-#define SKB_RES 2
-#else
-#define SKB_RES CONFIG_IBM_EMAC_SKBRES
+/* Simple sanity check */
+#if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256
+#error Invalid number of buffer descriptors (greater than 256)
 #endif
 
-/* Note about alignement. alloc_skb() returns a cache line
- * aligned buffer. However, dev_alloc_skb() will add 16 more
- * bytes and "reserve" them, so our buffer will actually end
- * on a half cache line. What we do is to use directly
- * alloc_skb, allocate 16 more bytes to match the total amount
- * allocated by dev_alloc_skb(), but we don't reserve.
+// XXX
+#define EMAC_MIN_MTU			46
+#define EMAC_MAX_MTU			9000
+
+/* Maximum L2 header length (VLAN tagged, no FCS) */
+#define EMAC_MTU_OVERHEAD		(6 * 2 + 2 + 4)
+
+/* RX BD size for the given MTU */
+static inline int emac_rx_size(int mtu)
+{
+	if (mtu > ETH_DATA_LEN)
+		return MAL_MAX_RX_SIZE;
+	else
+		return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD);
+}
+
+#define EMAC_DMA_ALIGN(x)		ALIGN((x), dma_get_cache_alignment())
+
+#define EMAC_RX_SKB_HEADROOM		\
+	EMAC_DMA_ALIGN(CONFIG_IBM_EMAC_RX_SKB_HEADROOM)
+
+/* Size of RX skb for the given MTU */
+static inline int emac_rx_skb_size(int mtu)
+{
+	int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu));
+	return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM;
+}
+
+/* RX DMA sync size */
+static inline int emac_rx_sync_size(int mtu)
+{
+	return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2);
+}
+
+/* Driver statistcs is split into two parts to make it more cache friendly:
+ *   - normal statistics (packet count, etc)
+ *   - error statistics
+ *
+ * When statistics is requested by ethtool, these parts are concatenated,
+ * normal one goes first.
+ *
+ * Please, keep these structures in sync with emac_stats_keys.
  */
-#define MAX_NUM_BUF_DESC	255
-#define DESC_BUF_SIZE		4080	/* max 4096-16 */
-#define DESC_BUF_SIZE_REG	(DESC_BUF_SIZE / 16)
-
-/* Transmitter timeout. */
-#define TX_TIMEOUT		(2*HZ)
-
-/* MDIO latency delay */
-#define MDIO_DELAY		250
-
-/* Power managment shift registers */
-#define IBM_CPM_EMMII	0	/* Shift value for MII */
-#define IBM_CPM_EMRX	1	/* Shift value for recv */
-#define IBM_CPM_EMTX	2	/* Shift value for MAC */
-#define IBM_CPM_EMAC(x)	(((x)>>IBM_CPM_EMMII) | ((x)>>IBM_CPM_EMRX) | ((x)>>IBM_CPM_EMTX))
-
-#define ENET_HEADER_SIZE	14
-#define ENET_FCS_SIZE		4
-#define ENET_DEF_MTU_SIZE	1500
-#define ENET_DEF_BUF_SIZE	(ENET_DEF_MTU_SIZE + ENET_HEADER_SIZE + ENET_FCS_SIZE)
-#define EMAC_MIN_FRAME		64
-#define EMAC_MAX_FRAME		9018
-#define EMAC_MIN_MTU		(EMAC_MIN_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE)
-#define EMAC_MAX_MTU		(EMAC_MAX_FRAME - ENET_HEADER_SIZE - ENET_FCS_SIZE)
-
-#ifdef CONFIG_IBM_EMAC_ERRMSG
-void emac_serr_dump_0(struct net_device *dev);
-void emac_serr_dump_1(struct net_device *dev);
-void emac_err_dump(struct net_device *dev, int em0isr);
-void emac_phy_dump(struct net_device *);
-void emac_desc_dump(struct net_device *);
-void emac_mac_dump(struct net_device *);
-void emac_mal_dump(struct net_device *);
-#else
-#define emac_serr_dump_0(dev) do { } while (0)
-#define emac_serr_dump_1(dev) do { } while (0)
-#define emac_err_dump(dev,x) do { } while (0)
-#define emac_phy_dump(dev) do { } while (0)
-#define emac_desc_dump(dev) do { } while (0)
-#define emac_mac_dump(dev) do { } while (0)
-#define emac_mal_dump(dev) do { } while (0)
-#endif
+
+/* Normal TX/RX Statistics */
+struct ibm_emac_stats {
+	u64 rx_packets;
+	u64 rx_bytes;
+	u64 tx_packets;
+	u64 tx_bytes;
+	u64 rx_packets_csum;
+	u64 tx_packets_csum;
+};
+
+/* Error statistics */
+struct ibm_emac_error_stats {
+	u64 tx_undo;
+
+	/* Software RX Errors */
+	u64 rx_dropped_stack;
+	u64 rx_dropped_oom;
+	u64 rx_dropped_error;
+	u64 rx_dropped_resize;
+	u64 rx_dropped_mtu;
+	u64 rx_stopped;
+	/* BD reported RX errors */
+	u64 rx_bd_errors;
+	u64 rx_bd_overrun;
+	u64 rx_bd_bad_packet;
+	u64 rx_bd_runt_packet;
+	u64 rx_bd_short_event;
+	u64 rx_bd_alignment_error;
+	u64 rx_bd_bad_fcs;
+	u64 rx_bd_packet_too_long;
+	u64 rx_bd_out_of_range;
+	u64 rx_bd_in_range;
+	/* EMAC IRQ reported RX errors */
+	u64 rx_parity;
+	u64 rx_fifo_overrun;
+	u64 rx_overrun;
+	u64 rx_bad_packet;
+	u64 rx_runt_packet;
+	u64 rx_short_event;
+	u64 rx_alignment_error;
+	u64 rx_bad_fcs;
+	u64 rx_packet_too_long;
+	u64 rx_out_of_range;
+	u64 rx_in_range;
+
+	/* Software TX Errors */
+	u64 tx_dropped;
+	/* BD reported TX errors */
+	u64 tx_bd_errors;
+	u64 tx_bd_bad_fcs;
+	u64 tx_bd_carrier_loss;
+	u64 tx_bd_excessive_deferral;
+	u64 tx_bd_excessive_collisions;
+	u64 tx_bd_late_collision;
+	u64 tx_bd_multple_collisions;
+	u64 tx_bd_single_collision;
+	u64 tx_bd_underrun;
+	u64 tx_bd_sqe;
+	/* EMAC IRQ reported TX errors */
+	u64 tx_parity;
+	u64 tx_underrun;
+	u64 tx_sqe;
+	u64 tx_errors;
+};
+
+#define EMAC_ETHTOOL_STATS_COUNT	((sizeof(struct ibm_emac_stats) + \
+					  sizeof(struct ibm_emac_error_stats)) \
+					 / sizeof(u64))
 
 struct ocp_enet_private {
-	struct sk_buff *tx_skb[NUM_TX_BUFF];
-	struct sk_buff *rx_skb[NUM_RX_BUFF];
-	struct mal_descriptor *tx_desc;
-	struct mal_descriptor *rx_desc;
-	struct mal_descriptor *rx_dirty;
-	struct net_device_stats stats;
-	int tx_cnt;
-	int rx_slot;
-	int dirty_rx;
-	int tx_slot;
-	int ack_slot;
-	int rx_buffer_size;
-
-	struct mii_phy phy_mii;
-	int mii_phy_addr;
-	int want_autoneg;
-	int timer_ticks;
-	struct timer_list link_timer;
-	struct net_device *mdio_dev;
-
-	struct ocp_device *rgmii_dev;
-	int rgmii_input;
-
-	struct ocp_device *zmii_dev;
-	int zmii_input;
-
-	struct ibm_ocp_mal *mal;
-	int mal_tx_chan, mal_rx_chan;
-	struct mal_commac commac;
-
-	struct ocp_device *tah_dev;
-
-	int opened;
-	int going_away;
-	int wol_irq;
-	emac_t *emacp;
-	struct ocp_device *ocpdev;
-	struct net_device *ndev;
-	spinlock_t lock;
+	struct net_device		*ndev;		/* 0 */
+	struct emac_regs		*emacp;
+	
+	struct mal_descriptor		*tx_desc;
+	int				tx_cnt;
+	int				tx_slot;
+	int				ack_slot;
+
+	struct mal_descriptor		*rx_desc;
+	int				rx_slot;
+	struct sk_buff			*rx_sg_skb;	/* 1 */
+	int 				rx_skb_size;
+	int				rx_sync_size;
+
+	struct ibm_emac_stats 		stats;
+	struct ocp_device		*tah_dev;
+
+	struct ibm_ocp_mal		*mal;
+	struct mal_commac		commac;
+
+	struct sk_buff			*tx_skb[NUM_TX_BUFF];
+	struct sk_buff			*rx_skb[NUM_RX_BUFF];
+
+	struct ocp_device		*zmii_dev;
+	int				zmii_input;
+	struct ocp_enet_private		*mdio_dev;
+	struct ocp_device		*rgmii_dev;
+	int				rgmii_input;
+
+	struct ocp_def			*def;
+
+	struct mii_phy			phy;
+	struct timer_list		link_timer;
+	int				reset_failed;
+
+	struct ibm_emac_error_stats	estats;
+	struct net_device_stats		nstats;
+
+	struct device*			ldev;
 };
-#endif				/* _IBM_EMAC_CORE_H_ */
+
+/* Ethtool get_regs complex data.
+ * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH 
+ * when available.
+ * 
+ * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr, 
+ * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers.
+ * Each register component is preceded with emac_ethtool_regs_subhdr.
+ * Order of the optional headers follows their relative bit posititions 
+ * in emac_ethtool_regs_hdr.components
+ */
+#define EMAC_ETHTOOL_REGS_ZMII		0x00000001
+#define EMAC_ETHTOOL_REGS_RGMII		0x00000002
+#define EMAC_ETHTOOL_REGS_TAH		0x00000004
+
+struct emac_ethtool_regs_hdr {
+	u32 components;
+};
+
+struct emac_ethtool_regs_subhdr {
+	u32 version;
+	u32 index;
+};
+
+#endif				/* __IBM_EMAC_CORE_H_ */

drivers/net/ibm_emac/ibm_emac_debug.h

+/*
+ * drivers/net/ibm_emac/ibm_ocp_debug.h
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, debug print routines.
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#ifndef __IBM_EMAC_DEBUG_H_
+#define __IBM_EMAC_DEBUG_H_
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include "ibm_emac_core.h"
+#include "ibm_emac_mal.h"
+
+#if defined(CONFIG_IBM_EMAC_DEBUG)
+void emac_dbg_register(int idx, struct ocp_enet_private *dev);
+void mal_dbg_register(int idx, struct ibm_ocp_mal *mal);
+int emac_init_debug(void) __init;
+void emac_fini_debug(void) __exit;
+void emac_dbg_dump_all(void);
+# define DBG_LEVEL		1
+#else
+# define emac_dbg_register(x,y) ((void)0)
+# define mal_dbg_register(x,y)	((void)0)
+# define emac_init_debug()	((void)0)
+# define emac_fini_debug()	((void)0)
+# define emac_dbg_dump_all()	((void)0)
+# define DBG_LEVEL		0
+#endif
+
+#if DBG_LEVEL > 0
+#  define DBG(f,x...)		printk("emac" f, ##x)
+#  define MAL_DBG(f,x...)	printk("mal" f, ##x)
+#  define ZMII_DBG(f,x...)	printk("zmii" f, ##x)
+#  define RGMII_DBG(f,x...)	printk("rgmii" f, ##x)
+#  define NL			"\n"
+#else
+#  define DBG(f,x...)		((void)0)
+#  define MAL_DBG(f,x...)	((void)0)
+#  define ZMII_DBG(f,x...)	((void)0)
+#  define RGMII_DBG(f,x...)	((void)0)
+#endif
+#if DBG_LEVEL > 1
+#  define DBG2(f,x...) 		DBG(f, ##x)
+#  define MAL_DBG2(f,x...) 	MAL_DBG(f, ##x)
+#  define ZMII_DBG2(f,x...) 	ZMII_DBG(f, ##x)
+#  define RGMII_DBG2(f,x...) 	RGMII_DBG(f, ##x)
+#else
+#  define DBG2(f,x...) 		((void)0)
+#  define MAL_DBG2(f,x...) 	((void)0)
+#  define ZMII_DBG2(f,x...) 	((void)0)
+#  define RGMII_DBG2(f,x...) 	((void)0)
+#endif
+
+#endif				/* __IBM_EMAC_DEBUG_H_ */

drivers/net/ibm_emac/ibm_emac_phy.h

-
 /*
- * ibm_emac_phy.h
- *
+ * drivers/net/ibm_emac/ibm_emac_phy.h
  *
- *      Benjamin Herrenschmidt <benh@kernel.crashing.org>
- *      February 2003
+ * Driver for PowerPC 4xx on-chip ethernet controller, PHY support
  *
- * This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * February 2003
  *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR   IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT,  INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
+ * Minor additions by Eugene Surovegin <ebs@ebshome.net>, 2004
  *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
  *
  * This file basically duplicates sungem_phy.{c,h} with different PHYs
  * supported. I'm looking into merging that in a single mii layer more
  * flexible than mii.c 
  */
 
-#ifndef _IBM_EMAC_PHY_H_
-#define _IBM_EMAC_PHY_H_
-
-/*
- * PHY mode settings
- * Used for multi-mode capable PHYs
- */
-#define PHY_MODE_NA	0
-#define PHY_MODE_MII	1
-#define PHY_MODE_RMII	2
-#define PHY_MODE_SMII	3
-#define PHY_MODE_RGMII	4
-#define PHY_MODE_TBI	5
-#define PHY_MODE_GMII	6
-#define PHY_MODE_RTBI	7
-#define PHY_MODE_SGMII	8
-
-/*
- * PHY specific registers/values
- */
-
-/* CIS8201 */
-#define MII_CIS8201_EPCR	0x17
-#define EPCR_MODE_MASK		0x3000
-#define EPCR_GMII_MODE		0x0000
-#define EPCR_RGMII_MODE		0x1000
-#define EPCR_TBI_MODE		0x2000
-#define EPCR_RTBI_MODE		0x3000
+#ifndef _IBM_OCP_PHY_H_
+#define _IBM_OCP_PHY_H_
 
 struct mii_phy;
 
@@ -77,7 +37,8 @@ struct mii_phy_ops {
 struct mii_phy_def {
 	u32 phy_id;		/* Concatenated ID1 << 16 | ID2 */
 	u32 phy_id_mask;	/* Significant bits */
-	u32 features;		/* Ethtool SUPPORTED_* defines */
+	u32 features;		/* Ethtool SUPPORTED_* defines or 
+				   0 for autodetect */
 	int magic_aneg;		/* Autoneg does all speed test for us */
 	const char *name;
 	const struct mii_phy_ops *ops;
@@ -86,8 +47,11 @@ struct mii_phy_def {
 /* An instance of a PHY, partially borrowed from mii_if_info */
 struct mii_phy {
 	struct mii_phy_def *def;
-	int advertising;
-	int mii_id;
+	u32 advertising;	/* Ethtool ADVERTISED_* defines */
+	u32 features;		/* Copied from mii_phy_def.features 
+				   or determined automaticaly */
+	int address;		/* PHY address */
+	int mode;		/* PHY mode */
 
 	/* 1: autoneg enabled, 0: disabled */
 	int autoneg;
@@ -98,40 +62,19 @@ struct mii_phy {
 	int speed;
 	int duplex;
 	int pause;
-
-	/* PHY mode - if needed */
-	int mode;
+	int asym_pause;
 
 	/* Provided by host chip */
 	struct net_device *dev;
-	int (*mdio_read) (struct net_device * dev, int mii_id, int reg);
-	void (*mdio_write) (struct net_device * dev, int mii_id, int reg,
+	int (*mdio_read) (struct net_device * dev, int addr, int reg);
+	void (*mdio_write) (struct net_device * dev, int addr, int reg,
 			    int val);
 };
 
 /* Pass in a struct mii_phy with dev, mdio_read and mdio_write
  * filled, the remaining fields will be filled on return
  */
-extern int mii_phy_probe(struct mii_phy *phy, int mii_id);
-
-static inline int __phy_read(struct mii_phy *phy, int id, int reg)
-{
-	return phy->mdio_read(phy->dev, id, reg);
-}
-
-static inline void __phy_write(struct mii_phy *phy, int id, int reg, int val)
-{
-	phy->mdio_write(phy->dev, id, reg, val);
-}
-
-static inline int phy_read(struct mii_phy *phy, int reg)
-{
-	return phy->mdio_read(phy->dev, phy->mii_id, reg);
-}
-
-static inline void phy_write(struct mii_phy *phy, int reg, int val)
-{
-	phy->mdio_write(phy->dev, phy->mii_id, reg, val);
-}
+int mii_phy_probe(struct mii_phy *phy, int address);
+int mii_reset_phy(struct mii_phy *phy);
 
-#endif				/* _IBM_EMAC_PHY_H_ */
+#endif				/* _IBM_OCP_PHY_H_ */

drivers/net/ibm_emac/ibm_emac_rgmii.c

+/*
+ * drivers/net/ibm_emac/ibm_emac_rgmii.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by
+ * 	Matt Porter <mporter@kernel.crashing.org>
+ * 	Copyright 2004 MontaVista Software, Inc.
+ * 
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/ethtool.h>
+#include <asm/io.h>
+
+#include "ibm_emac_core.h"
+#include "ibm_emac_debug.h"
+
+/* RGMIIx_FER */
+#define RGMII_FER_MASK(idx)	(0x7 << ((idx) * 4))
+#define RGMII_FER_RTBI(idx)	(0x4 << ((idx) * 4))
+#define RGMII_FER_RGMII(idx)	(0x5 << ((idx) * 4))
+#define RGMII_FER_TBI(idx)	(0x6 << ((idx) * 4))
+#define RGMII_FER_GMII(idx)	(0x7 << ((idx) * 4))
+
+/* RGMIIx_SSR */
+#define RGMII_SSR_MASK(idx)	(0x7 << ((idx) * 8))
+#define RGMII_SSR_100(idx)	(0x2 << ((idx) * 8))
+#define RGMII_SSR_1000(idx)	(0x4 << ((idx) * 8))
+
+/* RGMII bridge supports only GMII/TBI and RGMII/RTBI PHYs */
+static inline int rgmii_valid_mode(int phy_mode)
+{
+	return  phy_mode == PHY_MODE_GMII ||
+		phy_mode == PHY_MODE_RGMII ||
+		phy_mode == PHY_MODE_TBI ||
+		phy_mode == PHY_MODE_RTBI;
+}
+
+static inline const char *rgmii_mode_name(int mode)
+{
+	switch (mode) {
+	case PHY_MODE_RGMII:
+		return "RGMII";
+	case PHY_MODE_TBI:
+		return "TBI";
+	case PHY_MODE_GMII:
+		return "GMII";
+	case PHY_MODE_RTBI:
+		return "RTBI";
+	default:
+		BUG();
+	}
+}
+
+static inline u32 rgmii_mode_mask(int mode, int input)
+{
+	switch (mode) {
+	case PHY_MODE_RGMII:
+		return RGMII_FER_RGMII(input);
+	case PHY_MODE_TBI:
+		return RGMII_FER_TBI(input);
+	case PHY_MODE_GMII:
+		return RGMII_FER_GMII(input);
+	case PHY_MODE_RTBI:
+		return RGMII_FER_RTBI(input);
+	default:
+		BUG();
+	}
+}
+
+static int __init rgmii_init(struct ocp_device *ocpdev, int input, int mode)
+{
+	struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+	struct rgmii_regs *p;
+
+	RGMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, mode);
+
+	if (!dev) {
+		dev = kzalloc(sizeof(struct ibm_ocp_rgmii), GFP_KERNEL);
+		if (!dev) {
+			printk(KERN_ERR
+			       "rgmii%d: couldn't allocate device structure!\n",
+			       ocpdev->def->index);
+			return -ENOMEM;
+		}
+
+		p = (struct rgmii_regs *)ioremap(ocpdev->def->paddr,
+						 sizeof(struct rgmii_regs));
+		if (!p) {
+			printk(KERN_ERR
+			       "rgmii%d: could not ioremap device registers!\n",
+			       ocpdev->def->index);
+			kfree(dev);
+			return -ENOMEM;
+		}
+
+		dev->base = p;
+		ocp_set_drvdata(ocpdev, dev);
+
+		/* Disable all inputs by default */
+		out_be32(&p->fer, 0);
+	} else
+		p = dev->base;
+
+	/* Enable this input */
+	out_be32(&p->fer, in_be32(&p->fer) | rgmii_mode_mask(mode, input));
+
+	printk(KERN_NOTICE "rgmii%d: input %d in %s mode\n",
+	       ocpdev->def->index, input, rgmii_mode_name(mode));
+
+	++dev->users;
+	return 0;
+}
+
+int __init rgmii_attach(void *emac)
+{
+	struct ocp_enet_private *dev = emac;
+	struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+	/* Check if we need to attach to a RGMII */
+	if (emacdata->rgmii_idx >= 0 && rgmii_valid_mode(emacdata->phy_mode)) {
+		dev->rgmii_input = emacdata->rgmii_mux;
+		dev->rgmii_dev =
+		    ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_RGMII,
+				    emacdata->rgmii_idx);
+		if (!dev->rgmii_dev) {
+			printk(KERN_ERR "emac%d: unknown rgmii%d!\n",
+			       dev->def->index, emacdata->rgmii_idx);
+			return -ENODEV;
+		}
+		if (rgmii_init
+		    (dev->rgmii_dev, dev->rgmii_input, emacdata->phy_mode)) {
+			printk(KERN_ERR
+			       "emac%d: rgmii%d initialization failed!\n",
+			       dev->def->index, emacdata->rgmii_idx);
+			return -ENODEV;
+		}
+	}
+	return 0;
+}
+
+void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed)
+{
+	struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+	u32 ssr = in_be32(&dev->base->ssr) & ~RGMII_SSR_MASK(input);
+
+	RGMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed);
+
+	if (speed == SPEED_1000)
+		ssr |= RGMII_SSR_1000(input);
+	else if (speed == SPEED_100)
+		ssr |= RGMII_SSR_100(input);
+
+	out_be32(&dev->base->ssr, ssr);
+}
+
+void __exit __rgmii_fini(struct ocp_device *ocpdev, int input)
+{
+	struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+	BUG_ON(!dev || dev->users == 0);
+
+	RGMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input);
+
+	/* Disable this input */
+	out_be32(&dev->base->fer,
+		 in_be32(&dev->base->fer) & ~RGMII_FER_MASK(input));
+
+	if (!--dev->users) {
+		/* Free everything if this is the last user */
+		ocp_set_drvdata(ocpdev, NULL);
+		iounmap((void *)dev->base);
+		kfree(dev);
+	}
+}
+
+int __rgmii_get_regs_len(struct ocp_device *ocpdev)
+{
+	return sizeof(struct emac_ethtool_regs_subhdr) +
+	    sizeof(struct rgmii_regs);
+}
+
+void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf)
+{
+	struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev);
+	struct emac_ethtool_regs_subhdr *hdr = buf;
+	struct rgmii_regs *regs = (struct rgmii_regs *)(hdr + 1);
+
+	hdr->version = 0;
+	hdr->index = ocpdev->def->index;
+	memcpy_fromio(regs, dev->base, sizeof(struct rgmii_regs));
+	return regs + 1;
+}

drivers/net/ibm_emac/ibm_emac_rgmii.h

 /*
- * Defines for the IBM RGMII bridge
+ * drivers/net/ibm_emac/ibm_emac_rgmii.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
  *
  * Based on ocp_zmii.h/ibm_emac_zmii.h
  * Armin Kuster akuster@mvista.com
@@ -7,6 +9,9 @@
  * Copyright 2004 MontaVista Software, Inc.
  * Matt Porter <mporter@kernel.crashing.org>
  *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
@@ -19,47 +24,42 @@
 #include <linux/config.h>
 
 /* RGMII bridge */
-typedef struct rgmii_regs {
+struct rgmii_regs {
 	u32 fer;		/* Function enable register */
 	u32 ssr;		/* Speed select register */
-} rgmii_t;
-
-#define RGMII_INPUTS			4
+};
 
 /* RGMII device */
 struct ibm_ocp_rgmii {
 	struct rgmii_regs *base;
-	int mode[RGMII_INPUTS];
 	int users;		/* number of EMACs using this RGMII bridge */
 };
 
-/* Fuctional Enable Reg */
-#define RGMII_FER_MASK(x)		(0x00000007 << (4*x))
-#define RGMII_RTBI			0x00000004
-#define RGMII_RGMII			0x00000005
-#define RGMII_TBI  			0x00000006
-#define RGMII_GMII 			0x00000007
-
-/* Speed Selection reg */
+#ifdef CONFIG_IBM_EMAC_RGMII
+int rgmii_attach(void *emac) __init;
 
-#define RGMII_SP2_100	0x00000002
-#define RGMII_SP2_1000	0x00000004
-#define RGMII_SP3_100	0x00000200
-#define RGMII_SP3_1000	0x00000400
+void __rgmii_fini(struct ocp_device *ocpdev, int input) __exit;
+static inline void rgmii_fini(struct ocp_device *ocpdev, int input)
+{
+	if (ocpdev)
+		__rgmii_fini(ocpdev, input);
+}
 
-#define RGMII_MII2_SPDMASK	 0x00000007
-#define RGMII_MII3_SPDMASK	 0x00000700
+void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed);
 
-#define RGMII_MII2_100MB	 RGMII_SP2_100 & ~RGMII_SP2_1000
-#define RGMII_MII2_1000MB 	 RGMII_SP2_1000 & ~RGMII_SP2_100
-#define RGMII_MII2_10MB		 ~(RGMII_SP2_100 | RGMII_SP2_1000)
-#define RGMII_MII3_100MB	 RGMII_SP3_100 & ~RGMII_SP3_1000
-#define RGMII_MII3_1000MB 	 RGMII_SP3_1000 & ~RGMII_SP3_100
-#define RGMII_MII3_10MB		 ~(RGMII_SP3_100 | RGMII_SP3_1000)
+int __rgmii_get_regs_len(struct ocp_device *ocpdev);
+static inline int rgmii_get_regs_len(struct ocp_device *ocpdev)
+{
+	return ocpdev ? __rgmii_get_regs_len(ocpdev) : 0;
+}
 
-#define RTBI		0
-#define RGMII		1
-#define TBI		2
-#define GMII		3
+void *rgmii_dump_regs(struct ocp_device *ocpdev, void *buf);
+#else
+# define rgmii_attach(x)	0
+# define rgmii_fini(x,y)	((void)0)
+# define rgmii_set_speed(x,y,z)	((void)0)
+# define rgmii_get_regs_len(x)	0
+# define rgmii_dump_regs(x,buf)	(buf)
+#endif				/* !CONFIG_IBM_EMAC_RGMII */
 
 #endif				/* _IBM_EMAC_RGMII_H_ */

drivers/net/ibm_emac/ibm_emac_tah.c

+/*
+ * drivers/net/ibm_emac/ibm_emac_tah.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
+ *
+ * Copyright 2004 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/config.h>
+#include <asm/io.h>
+
+#include "ibm_emac_core.h"
+
+static int __init tah_init(struct ocp_device *ocpdev)
+{
+	struct tah_regs *p;
+
+	if (ocp_get_drvdata(ocpdev)) {
+		printk(KERN_ERR "tah%d: already in use!\n", ocpdev->def->index);
+		return -EBUSY;
+	}
+
+	/* Initialize TAH and enable IPv4 checksum verification, no TSO yet */
+	p = (struct tah_regs *)ioremap(ocpdev->def->paddr, sizeof(*p));
+	if (!p) {
+		printk(KERN_ERR "tah%d: could not ioremap device registers!\n",
+		       ocpdev->def->index);
+		return -ENOMEM;
+	}
+	ocp_set_drvdata(ocpdev, p);
+	__tah_reset(ocpdev);
+
+	return 0;
+}
+
+int __init tah_attach(void *emac)
+{
+	struct ocp_enet_private *dev = emac;
+	struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+	/* Check if we need to attach to a TAH */
+	if (emacdata->tah_idx >= 0) {
+		dev->tah_dev = ocp_find_device(OCP_ANY_ID, OCP_FUNC_TAH,
+					       emacdata->tah_idx);
+		if (!dev->tah_dev) {
+			printk(KERN_ERR "emac%d: unknown tah%d!\n",
+			       dev->def->index, emacdata->tah_idx);
+			return -ENODEV;
+		}
+		if (tah_init(dev->tah_dev)) {
+			printk(KERN_ERR
+			       "emac%d: tah%d initialization failed!\n",
+			       dev->def->index, emacdata->tah_idx);
+			return -ENODEV;
+		}
+	}
+	return 0;
+}
+
+void __exit __tah_fini(struct ocp_device *ocpdev)
+{
+	struct tah_regs *p = ocp_get_drvdata(ocpdev);
+	BUG_ON(!p);
+	ocp_set_drvdata(ocpdev, NULL);
+	iounmap((void *)p);
+}
+
+void __tah_reset(struct ocp_device *ocpdev)
+{
+	struct tah_regs *p = ocp_get_drvdata(ocpdev);
+	int n;
+
+	/* Reset TAH */
+	out_be32(&p->mr, TAH_MR_SR);
+	n = 100;
+	while ((in_be32(&p->mr) & TAH_MR_SR) && n)
+		--n;
+
+	if (unlikely(!n))
+		printk(KERN_ERR "tah%d: reset timeout\n", ocpdev->def->index);
+
+	/* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
+	out_be32(&p->mr,
+		 TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
+		 TAH_MR_DIG);
+}
+
+int __tah_get_regs_len(struct ocp_device *ocpdev)
+{
+	return sizeof(struct emac_ethtool_regs_subhdr) +
+	    sizeof(struct tah_regs);
+}
+
+void *tah_dump_regs(struct ocp_device *ocpdev, void *buf)
+{
+	struct tah_regs *dev = ocp_get_drvdata(ocpdev);
+	struct emac_ethtool_regs_subhdr *hdr = buf;
+	struct tah_regs *regs = (struct tah_regs *)(hdr + 1);
+
+	hdr->version = 0;
+	hdr->index = ocpdev->def->index;
+	memcpy_fromio(regs, dev, sizeof(struct tah_regs));
+	return regs + 1;
+}

drivers/net/ibm_emac/ibm_emac_tah.h

 /*
- * Defines for the IBM TAH
+ * drivers/net/ibm_emac/ibm_emac_tah.h
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, TAH support.
  *
  * Copyright 2004 MontaVista Software, Inc.
  * Matt Porter <mporter@kernel.crashing.org>
  *
+ * Copyright (c) 2005 Eugene Surovegin <ebs@ebshome.net>
+ *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
@@ -13,36 +17,72 @@
 #ifndef _IBM_EMAC_TAH_H
 #define _IBM_EMAC_TAH_H
 
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/ocp.h>
+
 /* TAH */
-typedef struct tah_regs {
-	u32 tah_revid;
+struct tah_regs {
+	u32 revid;
 	u32 pad[3];
-	u32 tah_mr;
-	u32 tah_ssr0;
-	u32 tah_ssr1;
-	u32 tah_ssr2;
-	u32 tah_ssr3;
-	u32 tah_ssr4;
-	u32 tah_ssr5;
-	u32 tah_tsr;
-} tah_t;
+	u32 mr;
+	u32 ssr0;
+	u32 ssr1;
+	u32 ssr2;
+	u32 ssr3;
+	u32 ssr4;
+	u32 ssr5;
+	u32 tsr;
+};
 
 /* TAH engine */
-#define TAH_MR_CVR			0x80000000
-#define TAH_MR_SR			0x40000000
-#define TAH_MR_ST_256			0x01000000
-#define TAH_MR_ST_512			0x02000000
-#define TAH_MR_ST_768			0x03000000
-#define TAH_MR_ST_1024			0x04000000
-#define TAH_MR_ST_1280			0x05000000
-#define TAH_MR_ST_1536			0x06000000
-#define TAH_MR_TFS_16KB			0x00000000
-#define TAH_MR_TFS_2KB			0x00200000
-#define TAH_MR_TFS_4KB			0x00400000
-#define TAH_MR_TFS_6KB			0x00600000
-#define TAH_MR_TFS_8KB			0x00800000
-#define TAH_MR_TFS_10KB			0x00a00000
-#define TAH_MR_DTFP			0x00100000
-#define TAH_MR_DIG			0x00080000
+#define TAH_MR_CVR		0x80000000
+#define TAH_MR_SR		0x40000000
+#define TAH_MR_ST_256		0x01000000
+#define TAH_MR_ST_512		0x02000000
+#define TAH_MR_ST_768		0x03000000
+#define TAH_MR_ST_1024		0x04000000
+#define TAH_MR_ST_1280		0x05000000
+#define TAH_MR_ST_1536		0x06000000
+#define TAH_MR_TFS_16KB		0x00000000
+#define TAH_MR_TFS_2KB		0x00200000
+#define TAH_MR_TFS_4KB		0x00400000
+#define TAH_MR_TFS_6KB		0x00600000
+#define TAH_MR_TFS_8KB		0x00800000
+#define TAH_MR_TFS_10KB		0x00a00000
+#define TAH_MR_DTFP		0x00100000
+#define TAH_MR_DIG		0x00080000
+
+#ifdef CONFIG_IBM_EMAC_TAH
+int tah_attach(void *emac) __init;
+
+void __tah_fini(struct ocp_device *ocpdev) __exit;
+static inline void tah_fini(struct ocp_device *ocpdev)
+{
+	if (ocpdev)
+		__tah_fini(ocpdev);
+}
+
+void __tah_reset(struct ocp_device *ocpdev);
+static inline void tah_reset(struct ocp_device *ocpdev)
+{
+	if (ocpdev)
+		__tah_reset(ocpdev);
+}
+
+int __tah_get_regs_len(struct ocp_device *ocpdev);
+static inline int tah_get_regs_len(struct ocp_device *ocpdev)
+{
+	return ocpdev ? __tah_get_regs_len(ocpdev) : 0;
+}
+
+void *tah_dump_regs(struct ocp_device *ocpdev, void *buf);
+#else
+# define tah_attach(x)		0
+# define tah_fini(x)		((void)0)
+# define tah_reset(x)		((void)0)
+# define tah_get_regs_len(x)	0
+# define tah_dump_regs(x,buf)	(buf)
+#endif				/* !CONFIG_IBM_EMAC_TAH */
 
 #endif				/* _IBM_EMAC_TAH_H */

drivers/net/ibm_emac/ibm_emac_zmii.c

+/*
+ * drivers/net/ibm_emac/ibm_emac_zmii.c
+ *
+ * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
+ *
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *
+ * Based on original work by
+ *      Armin Kuster <akuster@mvista.com>
+ * 	Copyright 2001 MontaVista Softare Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/ethtool.h>
+#include <asm/io.h>
+
+#include "ibm_emac_core.h"
+#include "ibm_emac_debug.h"
+
+/* ZMIIx_FER */
+#define ZMII_FER_MDI(idx)	(0x80000000 >> ((idx) * 4))
+#define ZMII_FER_MDI_ALL	(ZMII_FER_MDI(0) | ZMII_FER_MDI(1) | \
+				 ZMII_FER_MDI(2) | ZMII_FER_MDI(3))
+
+#define ZMII_FER_SMII(idx)	(0x40000000 >> ((idx) * 4))
+#define ZMII_FER_RMII(idx)	(0x20000000 >> ((idx) * 4))
+#define ZMII_FER_MII(idx)	(0x10000000 >> ((idx) * 4))
+
+/* ZMIIx_SSR */
+#define ZMII_SSR_SCI(idx)	(0x40000000 >> ((idx) * 4))
+#define ZMII_SSR_FSS(idx)	(0x20000000 >> ((idx) * 4))
+#define ZMII_SSR_SP(idx)	(0x10000000 >> ((idx) * 4))
+
+/* ZMII only supports MII, RMII and SMII 
+ * we also support autodetection for backward compatibility
+ */
+static inline int zmii_valid_mode(int mode)
+{
+	return  mode == PHY_MODE_MII ||
+		mode == PHY_MODE_RMII ||
+		mode == PHY_MODE_SMII ||
+		mode == PHY_MODE_NA;
+}
+
+static inline const char *zmii_mode_name(int mode)
+{
+	switch (mode) {
+	case PHY_MODE_MII:
+		return "MII";
+	case PHY_MODE_RMII:
+		return "RMII";
+	case PHY_MODE_SMII:
+		return "SMII";
+	default:
+		BUG();
+	}
+}
+
+static inline u32 zmii_mode_mask(int mode, int input)
+{
+	switch (mode) {
+	case PHY_MODE_MII:
+		return ZMII_FER_MII(input);
+	case PHY_MODE_RMII:
+		return ZMII_FER_RMII(input);
+	case PHY_MODE_SMII:
+		return ZMII_FER_SMII(input);
+	default:
+		return 0;
+	}
+}
+
+static int __init zmii_init(struct ocp_device *ocpdev, int input, int *mode)
+{
+	struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+	struct zmii_regs *p;
+
+	ZMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, *mode);
+
+	if (!dev) {
+		dev = kzalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL);
+		if (!dev) {
+			printk(KERN_ERR
+			       "zmii%d: couldn't allocate device structure!\n",
+			       ocpdev->def->index);
+			return -ENOMEM;
+		}
+		dev->mode = PHY_MODE_NA;
+
+		p = (struct zmii_regs *)ioremap(ocpdev->def->paddr,
+						sizeof(struct zmii_regs));
+		if (!p) {
+			printk(KERN_ERR
+			       "zmii%d: could not ioremap device registers!\n",
+			       ocpdev->def->index);
+			kfree(dev);
+			return -ENOMEM;
+		}
+		dev->base = p;
+		ocp_set_drvdata(ocpdev, dev);
+		
+		/* We may need FER value for autodetection later */
+		dev->fer_save = in_be32(&p->fer);
+
+		/* Disable all inputs by default */
+		out_be32(&p->fer, 0);
+	} else
+		p = dev->base;
+
+	if (!zmii_valid_mode(*mode)) {
+		/* Probably an EMAC connected to RGMII, 
+		 * but it still may need ZMII for MDIO 
+		 */
+		goto out;
+	}
+
+	/* Autodetect ZMII mode if not specified.
+	 * This is only for backward compatibility with the old driver.
+	 * Please, always specify PHY mode in your board port to avoid
+	 * any surprises.
+	 */
+	if (dev->mode == PHY_MODE_NA) {
+		if (*mode == PHY_MODE_NA) {
+			u32 r = dev->fer_save;
+
+			ZMII_DBG("%d: autodetecting mode, FER = 0x%08x" NL,
+				 ocpdev->def->index, r);
+			
+			if (r & (ZMII_FER_MII(0) | ZMII_FER_MII(1)))
+				dev->mode = PHY_MODE_MII;
+			else if (r & (ZMII_FER_RMII(0) | ZMII_FER_RMII(1)))
+				dev->mode = PHY_MODE_RMII;
+			else
+				dev->mode = PHY_MODE_SMII;
+		} else
+			dev->mode = *mode;
+
+		printk(KERN_NOTICE "zmii%d: bridge in %s mode\n",
+		       ocpdev->def->index, zmii_mode_name(dev->mode));
+	} else {
+		/* All inputs must use the same mode */
+		if (*mode != PHY_MODE_NA && *mode != dev->mode) {
+			printk(KERN_ERR
+			       "zmii%d: invalid mode %d specified for input %d\n",
+			       ocpdev->def->index, *mode, input);
+			return -EINVAL;
+		}
+	}
+
+	/* Report back correct PHY mode, 
+	 * it may be used during PHY initialization.
+	 */
+	*mode = dev->mode;
+
+	/* Enable this input */
+	out_be32(&p->fer, in_be32(&p->fer) | zmii_mode_mask(dev->mode, input));
+      out:
+	++dev->users;
+	return 0;
+}
+
+int __init zmii_attach(void *emac)
+{
+	struct ocp_enet_private *dev = emac;
+	struct ocp_func_emac_data *emacdata = dev->def->additions;
+
+	if (emacdata->zmii_idx >= 0) {
+		dev->zmii_input = emacdata->zmii_mux;
+		dev->zmii_dev =
+		    ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_ZMII,
+				    emacdata->zmii_idx);
+		if (!dev->zmii_dev) {
+			printk(KERN_ERR "emac%d: unknown zmii%d!\n",
+			       dev->def->index, emacdata->zmii_idx);
+			return -ENODEV;
+		}
+		if (zmii_init
+		    (dev->zmii_dev, dev->zmii_input, &emacdata->phy_mode)) {
+			printk(KERN_ERR
+			       "emac%d: zmii%d initialization failed!\n",
+			       dev->def->index, emacdata->zmii_idx);
+			return -ENODEV;
+		}
+	}
+	return 0;
+}
+
+void __zmii_enable_mdio(struct ocp_device *ocpdev, int input)
+{
+	struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+	u32 fer = in_be32(&dev->base->fer) & ~ZMII_FER_MDI_ALL;
+
+	ZMII_DBG2("%d: mdio(%d)" NL, ocpdev->def->index, input);
+
+	out_be32(&dev->base->fer, fer | ZMII_FER_MDI(input));
+}
+
+void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed)
+{
+	struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+	u32 ssr = in_be32(&dev->base->ssr);
+
+	ZMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed);
+
+	if (speed == SPEED_100)
+		ssr |= ZMII_SSR_SP(input);
+	else
+		ssr &= ~ZMII_SSR_SP(input);
+
+	out_be32(&dev->base->ssr, ssr);
+}
+
+void __exit __zmii_fini(struct ocp_device *ocpdev, int input)
+{
+	struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+	BUG_ON(!dev || dev->users == 0);
+
+	ZMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input);
+
+	/* Disable this input */
+	out_be32(&dev->base->fer,
+		 in_be32(&dev->base->fer) & ~zmii_mode_mask(dev->mode, input));
+
+	if (!--dev->users) {
+		/* Free everything if this is the last user */
+		ocp_set_drvdata(ocpdev, NULL);
+		iounmap((void *)dev->base);
+		kfree(dev);
+	}
+}
+
+int __zmii_get_regs_len(struct ocp_device *ocpdev)
+{
+	return sizeof(struct emac_ethtool_regs_subhdr) +
+	    sizeof(struct zmii_regs);
+}
+
+void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf)
+{
+	struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
+	struct emac_ethtool_regs_subhdr *hdr = buf;
+	struct zmii_regs *regs = (struct zmii_regs *)(hdr + 1);
+
+	hdr->version = 0;
+	hdr->index = ocpdev->def->index;
+	memcpy_fromio(regs, dev->base, sizeof(struct zmii_regs));
+	return regs + 1;
+}

drivers/net/ibm_emac/ibm_emac_zmii.h

 /*
- * ocp_zmii.h
+ * drivers/net/ibm_emac/ibm_emac_zmii.h
  *
- * Defines for the IBM ZMII bridge
+ * Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
  *
- *      Armin Kuster akuster@mvista.com
- *      Dec, 2001
+ * Copyright (c) 2004, 2005 Zultys Technologies.
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
  *
- * Copyright 2001 MontaVista Softare Inc.
+ * Based on original work by
+ *      Armin Kuster <akuster@mvista.com>
+ * 	Copyright 2001 MontaVista Softare Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
+ *
  */
-
 #ifndef _IBM_EMAC_ZMII_H_
 #define _IBM_EMAC_ZMII_H_
 
 #include <linux/config.h>
+#include <linux/init.h>
+#include <asm/ocp.h>
 
 /* ZMII bridge registers */
 struct zmii_regs {
@@ -26,68 +30,54 @@ struct zmii_regs {
 	u32 smiirs;		/* SMII status reg */
 };
 
-#define ZMII_INPUTS	4
-
 /* ZMII device */
 struct ibm_ocp_zmii {
 	struct zmii_regs *base;
-	int mode[ZMII_INPUTS];
+	int mode;		/* subset of PHY_MODE_XXXX */
 	int users;		/* number of EMACs using this ZMII bridge */
+	u32 fer_save;		/* FER value left by firmware */
 };
 
-/* Fuctional Enable Reg */
-
-#define ZMII_FER_MASK(x)	(0xf0000000 >> (4*x))
-
-#define ZMII_MDI0	0x80000000
-#define ZMII_SMII0	0x40000000
-#define ZMII_RMII0	0x20000000
-#define ZMII_MII0	0x10000000
-#define ZMII_MDI1	0x08000000
-#define ZMII_SMII1	0x04000000
-#define ZMII_RMII1	0x02000000
-#define ZMII_MII1	0x01000000
-#define ZMII_MDI2	0x00800000
-#define ZMII_SMII2	0x00400000
-#define ZMII_RMII2	0x00200000
-#define ZMII_MII2	0x00100000
-#define ZMII_MDI3	0x00080000
-#define ZMII_SMII3	0x00040000
-#define ZMII_RMII3	0x00020000
-#define ZMII_MII3	0x00010000
+#ifdef CONFIG_IBM_EMAC_ZMII
+int zmii_attach(void *emac) __init;
 
-/* Speed Selection reg */
+void __zmii_fini(struct ocp_device *ocpdev, int input) __exit;
+static inline void zmii_fini(struct ocp_device *ocpdev, int input)
+{
+	if (ocpdev)
+		__zmii_fini(ocpdev, input);
+}
 
-#define ZMII_SCI0	0x40000000
-#define ZMII_FSS0	0x20000000
-#define ZMII_SP0	0x10000000
-#define ZMII_SCI1	0x04000000
-#define ZMII_FSS1	0x02000000
-#define ZMII_SP1	0x01000000
-#define ZMII_SCI2	0x00400000
-#define ZMII_FSS2	0x00200000
-#define ZMII_SP2	0x00100000
-#define ZMII_SCI3	0x00040000
-#define ZMII_FSS3	0x00020000
-#define ZMII_SP3	0x00010000
+void __zmii_enable_mdio(struct ocp_device *ocpdev, int input);
+static inline void zmii_enable_mdio(struct ocp_device *ocpdev, int input)
+{
+	if (ocpdev)
+		__zmii_enable_mdio(ocpdev, input);
+}
 
-#define ZMII_MII0_100MB	ZMII_SP0
-#define ZMII_MII0_10MB	~ZMII_SP0
-#define ZMII_MII1_100MB	ZMII_SP1
-#define ZMII_MII1_10MB	~ZMII_SP1
-#define ZMII_MII2_100MB	ZMII_SP2
-#define ZMII_MII2_10MB	~ZMII_SP2
-#define ZMII_MII3_100MB	ZMII_SP3
-#define ZMII_MII3_10MB	~ZMII_SP3
+void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed);
+static inline void zmii_set_speed(struct ocp_device *ocpdev, int input,
+				  int speed)
+{
+	if (ocpdev)
+		__zmii_set_speed(ocpdev, input, speed);
+}
 
-/* SMII Status reg */
+int __zmii_get_regs_len(struct ocp_device *ocpdev);
+static inline int zmii_get_regs_len(struct ocp_device *ocpdev)
+{
+	return ocpdev ? __zmii_get_regs_len(ocpdev) : 0;
+}
 
-#define ZMII_STS0 0xFF000000	/* EMAC0 smii status mask */
-#define ZMII_STS1 0x00FF0000	/* EMAC1 smii status mask */
+void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf);
 
-#define SMII	0
-#define RMII	1
-#define MII	2
-#define MDI	3
+#else
+# define zmii_attach(x)		0
+# define zmii_fini(x,y)		((void)0)
+# define zmii_enable_mdio(x,y)	((void)0)
+# define zmii_set_speed(x,y,z)	((void)0)
+# define zmii_get_regs_len(x)	0
+# define zmii_dump_regs(x,buf)	(buf)
+#endif				/* !CONFIG_IBM_EMAC_ZMII */
 
 #endif				/* _IBM_EMAC_ZMII_H_ */