Commit 38c95e02 authored by Lee Jones's avatar Lee Jones Committed by Kalle Valo

brcmsmac: phy_lcn: Remove a bunch of unused variables

Fixes the following W=1 kernel build warning(s):

 In file included from drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:11:
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_rx_iq_cal’:
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:1366:29: warning: variable ‘RFOverride0_old’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_radio_2064_channel_tune_4313’:
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:1667:21: warning: variable ‘qFvco’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:1667:14: warning: variable ‘qFref’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:1667:6: warning: variable ‘qFxtal’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_idle_tssi_est’:
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:2856:6: warning: variable ‘idleTssi’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_tx_iqlo_soft_cal_full’:
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:3861:53: warning: variable ‘locc4’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:3861:46: warning: variable ‘locc3’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:3861:39: warning: variable ‘locc2’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:3861:32: warning: variable ‘iqcc0’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_periodic_cal’:
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:4196:6: warning: variable ‘rx_iqcomp_sz’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:4195:33: warning: variable ‘rx_iqcomp’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:4194:16: warning: variable ‘full_cal’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_phy_txpwr_srom_read_lcnphy’:
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:4919:7: warning: variable ‘opo’ set but not used [-Wunused-but-set-variable]

Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200826093401.1458456-28-lee.jones@linaro.org
parent 2d4a48d1
......@@ -1363,7 +1363,7 @@ wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi,
u16 tx_pwr_ctrl;
u8 tx_gain_index_old = 0;
bool result = false, tx_gain_override_old = false;
u16 i, Core1TxControl_old, RFOverride0_old,
u16 i, Core1TxControl_old,
RFOverrideVal0_old, rfoverride2_old, rfoverride2val_old,
rfoverride3_old, rfoverride3val_old, rfoverride4_old,
rfoverride4val_old, afectrlovr_old, afectrlovrval_old;
......@@ -1404,7 +1404,7 @@ wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi,
or_phy_reg(pi, 0x631, 0x0015);
RFOverride0_old = read_phy_reg(pi, 0x44c);
read_phy_reg(pi, 0x44c); /* RFOverride0_old */
RFOverrideVal0_old = read_phy_reg(pi, 0x44d);
rfoverride2_old = read_phy_reg(pi, 0x4b0);
rfoverride2val_old = read_phy_reg(pi, 0x4b1);
......@@ -1664,7 +1664,7 @@ wlc_lcnphy_radio_2064_channel_tune_4313(struct brcms_phy *pi, u8 channel)
const struct chan_info_2064_lcnphy *ci;
u8 rfpll_doubler = 0;
u8 pll_pwrup, pll_pwrup_ovr;
s32 qFxtal, qFref, qFvco, qFcal;
s32 qFcal;
u8 d15, d16, f16, e44, e45;
u32 div_int, div_frac, fvco3, fpfd, fref3, fcal_div;
u16 loop_bw, d30, setCount;
......@@ -1738,10 +1738,7 @@ wlc_lcnphy_radio_2064_channel_tune_4313(struct brcms_phy *pi, u8 channel)
fvco3 = (ci->freq * 3);
fref3 = 2 * fpfd;
qFxtal = wlc_lcnphy_qdiv_roundup(pi->xtalfreq, PLL_2064_MHZ, 16);
qFref = wlc_lcnphy_qdiv_roundup(fpfd, PLL_2064_MHZ, 16);
qFcal = pi->xtalfreq * fcal_div / PLL_2064_MHZ;
qFvco = wlc_lcnphy_qdiv_roundup(fvco3, 2, 16);
write_radio_reg(pi, RADIO_2064_REG04F, 0x02);
......@@ -2853,7 +2850,7 @@ static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi)
bool suspend, tx_gain_override_old;
struct lcnphy_txgains old_gains;
struct brcms_phy *pi = container_of(ppi, struct brcms_phy, pubpi_ro);
u16 idleTssi, idleTssi0_2C, idleTssi0_OB, idleTssi0_regvalue_OB,
u16 idleTssi0_2C, idleTssi0_OB, idleTssi0_regvalue_OB,
idleTssi0_regvalue_2C;
u16 SAVE_txpwrctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi);
u16 SAVE_lpfgain = read_radio_reg(pi, RADIO_2064_REG112);
......@@ -2863,7 +2860,7 @@ static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi)
u16 SAVE_iqadc_aux_en = read_radio_reg(pi, RADIO_2064_REG11F) & 4;
u8 SAVE_bbmult = wlc_lcnphy_get_bbmult(pi);
idleTssi = read_phy_reg(pi, 0x4ab);
read_phy_reg(pi, 0x4ab); /* idleTssi */
suspend = (0 == (bcma_read32(pi->d11core, D11REGOFFS(maccontrol)) &
MCTL_EN_MAC));
if (!suspend)
......@@ -2887,8 +2884,7 @@ static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi)
wlc_lcnphy_set_bbmult(pi, 0x0);
wlc_phy_do_dummy_tx(pi, true, OFF);
idleTssi = ((read_phy_reg(pi, 0x4ab) & (0x1ff << 0))
>> 0);
read_phy_reg(pi, 0x4ab); /* idleTssi */
idleTssi0_2C = ((read_phy_reg(pi, 0x63e) & (0x1ff << 0))
>> 0);
......@@ -3858,8 +3854,6 @@ void wlc_lcnphy_get_tx_iqcc(struct brcms_phy *pi, u16 *a, u16 *b)
static void wlc_lcnphy_tx_iqlo_soft_cal_full(struct brcms_phy *pi)
{
struct lcnphy_unsign16_struct iqcc0, locc2, locc3, locc4;
wlc_lcnphy_set_cc(pi, 0, 0, 0);
wlc_lcnphy_set_cc(pi, 2, 0, 0);
wlc_lcnphy_set_cc(pi, 3, 0, 0);
......@@ -3872,10 +3866,10 @@ static void wlc_lcnphy_tx_iqlo_soft_cal_full(struct brcms_phy *pi)
wlc_lcnphy_a1(pi, 2, 2, 1);
wlc_lcnphy_a1(pi, 0, 4, 3);
iqcc0 = wlc_lcnphy_get_cc(pi, 0);
locc2 = wlc_lcnphy_get_cc(pi, 2);
locc3 = wlc_lcnphy_get_cc(pi, 3);
locc4 = wlc_lcnphy_get_cc(pi, 4);
wlc_lcnphy_get_cc(pi, 0);
wlc_lcnphy_get_cc(pi, 2);
wlc_lcnphy_get_cc(pi, 3);
wlc_lcnphy_get_cc(pi, 4);
}
u16 wlc_lcnphy_get_tx_locc(struct brcms_phy *pi)
......@@ -4191,9 +4185,7 @@ static void wlc_lcnphy_glacial_timer_based_cal(struct brcms_phy *pi)
static void wlc_lcnphy_periodic_cal(struct brcms_phy *pi)
{
bool suspend, full_cal;
const struct lcnphy_rx_iqcomp *rx_iqcomp;
int rx_iqcomp_sz;
bool suspend;
u16 SAVE_pwrctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi);
s8 index;
struct phytbl_info tab;
......@@ -4203,9 +4195,6 @@ static void wlc_lcnphy_periodic_cal(struct brcms_phy *pi)
pi->phy_lastcal = pi->sh->now;
pi->phy_forcecal = false;
full_cal =
(pi_lcn->lcnphy_full_cal_channel !=
CHSPEC_CHANNEL(pi->radio_chanspec));
pi_lcn->lcnphy_full_cal_channel = CHSPEC_CHANNEL(pi->radio_chanspec);
index = pi_lcn->lcnphy_current_index;
......@@ -4220,9 +4209,6 @@ static void wlc_lcnphy_periodic_cal(struct brcms_phy *pi)
wlc_lcnphy_txpwrtbl_iqlo_cal(pi);
rx_iqcomp = lcnphy_rx_iqcomp_table_rev0;
rx_iqcomp_sz = ARRAY_SIZE(lcnphy_rx_iqcomp_table_rev0);
if (LCNREV_IS(pi->pubpi.phy_rev, 1))
wlc_lcnphy_rx_iq_cal(pi, NULL, 0, true, false, 1, 40);
else
......@@ -4916,10 +4902,6 @@ static bool wlc_phy_txpwr_srom_read_lcnphy(struct brcms_phy *pi)
offset_ofdm >>= 4;
}
} else {
u8 opo = 0;
opo = sprom->opo;
for (i = TXP_FIRST_CCK; i <= TXP_LAST_CCK; i++)
pi->tx_srom_max_rate_2g[i] = txpwr;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment