arm64: dts: qcom: sc7180: Move mss node to the right place

The modem node has an address of 4080000 and thus should come after tlmm
and before gpu. Move the node to the right place to maintainer proper
address sort order.
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Sibi Sankar <sibis@codeaurora.org>
Fixes: e14a15eb ("arm64: dts: qcom: sc7180: Add Q6V5 MSS node")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200521010337.229177-1-swboyd@chromium.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/sc7180.dtsi

@@ -1459,6 +1459,57 @@ pinconf-sd-cd {
 			};
 		};
 
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sc7180-mpss-pas";
+			reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+				 <&gcc GCC_MSS_NAV_AXI_CLK>,
+				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+				 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "bus", "nav", "snoc_axi",
+				      "mnoc_axi", "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
+					<&rpmhpd SC7180_CX>,
+					<&rpmhpd SC7180_MX>,
+					<&rpmhpd SC7180_MSS>;
+			power-domain-names = "load_state", "cx", "mx", "mss";
+
+			memory-region = <&mpss_mem>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+				 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+			reset-names = "mss_restart", "pdc_reset";
+
+			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+			qcom,spare-regs = <&tcsr_regs 0xb3e4>;
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apss_shared 12>;
+			};
+		};
+
 		gpu: gpu@5000000 {
 			compatible = "qcom,adreno-618.0", "qcom,adreno";
 			#stream-id-cells = <16>;
@@ -2054,57 +2105,6 @@ apss_merge_funnel_in: endpoint {
 			};
 		};
 
-		remoteproc_mpss: remoteproc@4080000 {
-			compatible = "qcom,sc7180-mpss-pas";
-			reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
-			reg-names = "qdsp6", "rmb";
-
-			interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover",
-					  "stop-ack", "shutdown-ack";
-
-			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
-				 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
-				 <&gcc GCC_MSS_NAV_AXI_CLK>,
-				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
-				 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "iface", "bus", "nav", "snoc_axi",
-				      "mnoc_axi", "xo";
-
-			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
-					<&rpmhpd SC7180_CX>,
-					<&rpmhpd SC7180_MX>,
-					<&rpmhpd SC7180_MSS>;
-			power-domain-names = "load_state", "cx", "mx", "mss";
-
-			memory-region = <&mpss_mem>;
-
-			qcom,smem-states = <&modem_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
-				 <&pdc_reset PDC_MODEM_SYNC_RESET>;
-			reset-names = "mss_restart", "pdc_reset";
-
-			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
-			qcom,spare-regs = <&tcsr_regs 0xb3e4>;
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
-				label = "modem";
-				qcom,remote-pid = <1>;
-				mboxes = <&apss_shared 12>;
-			};
-		};
-
 		sdhc_2: sdhci@8804000 {
 			compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;