Commit 3a0f8801 authored by Wang Dongsheng's avatar Wang Dongsheng Committed by Kumar Gala

powerpc/8544ds: add partition table for norflash

create partition table for norflash.
Signed-off-by: default avatarWang Dongsheng <Dongsheng.Wang@freescale.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 17ae4f0a
......@@ -20,8 +20,10 @@ memory {
reg = <0 0 0 0>; // Filled by U-Boot
};
lbc: localbus@e0005000 {
board_lbc: lbc: localbus@e0005000 {
reg = <0 0xe0005000 0 0x1000>;
ranges = <0x0 0x0 0x0 0xff800000 0x800000>;
};
board_soc: soc: soc8544@e0000000 {
......
......@@ -32,6 +32,45 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&board_lbc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x800000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
reg = <0x0 0x10000>;
label = "dtb-nor";
};
partition@20000 {
reg = <0x20000 0x30000>;
label = "diagnostic-nor";
read-only;
};
partition@200000 {
reg = <0x200000 0x200000>;
label = "dink-nor";
read-only;
};
partition@400000 {
reg = <0x400000 0x380000>;
label = "kernel-nor";
};
partition@780000 {
reg = <0x780000 0x80000>;
label = "u-boot-nor";
read-only;
};
};
};
&board_soc {
enet0: ethernet@24000 {
phy-handle = <&phy0>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment