Commit 3e011039 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'amlogic-dt64-2' of...

Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/late

Pull "Amlogic DT updates for v4.11, round 2" from Kevin Hilman:

- add SAR ADC driver
- add ADC laddered keys to meson-gxbb-p200 board

* tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM64: dts: meson-gxbb-p200: add ADC laddered keys
  ARM64: dts: meson: meson-gx: add the SAR ADC
  ARM64: dts: meson-gxl: add the pwm_ao_b pin
  ARM64: dts: meson-gx: add the missing pwm_AO_ab node
  clk: gxbb: fix CLKID_ETH defined twice
  ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
  clk: gxbb: add the SAR ADC clocks and expose them
  dt-bindings: amlogic: Add WeTek boards
  ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
  dt-bindings: vendor-prefix: Add wetek vendor prefix
  ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
  ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
  ARM64: dts: meson-gxbb-vega-s95: Add LED
  ARM64: dts: meson-gx: add the serial CTS and RTS pin groups
  ARM64: dts: meson-gx: add the missing uart_AO_B
  clk: meson-gxbb: Export HDMI clocks
  ARM64: dts: meson-gxm: add SCPI configuration for GXM
  ARM64: dts: meson-gx: move the SCPI and SRAM nodes to meson-gx
parents d0f7de92 6b6a1867
......@@ -40,6 +40,8 @@ Board compatible values:
- "hardkernel,odroid-c2" (Meson gxbb)
- "amlogic,p200" (Meson gxbb)
- "amlogic,p201" (Meson gxbb)
- "wetek,hub" (Meson gxbb)
- "wetek,play2" (Meson gxbb)
- "amlogic,p212" (Meson gxl s905x)
- "amlogic,p230" (Meson gxl s905d)
- "amlogic,p231" (Meson gxl s905d)
......
......@@ -320,6 +320,7 @@ virtio Virtual I/O Device Specification, developed by the OASIS consortium
vivante Vivante Corporation
voipac Voipac Technologies s.r.o.
wd Western Digital Corp.
wetek WeTek Electronics, limited.
wexler Wexler
winbond Winbond Electronics corp.
wlf Wolfson Microelectronics
......
......@@ -5,12 +5,14 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q201.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
always := $(dtb-y)
......
......@@ -65,6 +65,7 @@ cpu0: cpu@0 {
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
};
cpu1: cpu@1 {
......@@ -73,6 +74,7 @@ cpu1: cpu@1 {
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
};
cpu2: cpu@2 {
......@@ -81,6 +83,7 @@ cpu2: cpu@2 {
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
};
cpu3: cpu@3 {
......@@ -89,6 +92,7 @@ cpu3: cpu@3 {
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
};
l2: l2-cache0 {
......@@ -153,6 +157,28 @@ bid: bid@46 {
};
};
scpi {
compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
mboxes = <&mailbox 1 &mailbox 2>;
shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
scpi_clocks: clocks {
compatible = "arm,scpi-clocks";
scpi_dvfs: scpi_clocks@0 {
compatible = "arm,scpi-dvfs-clocks";
#clock-cells = <1>;
clock-indices = <0>;
clock-output-names = "vcpu";
};
};
scpi_sensors: sensors {
compatible = "arm,scpi-sensors";
#thermal-sensor-cells = <1>;
};
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
......@@ -211,6 +237,14 @@ pwm_cd: pwm@8650 {
status = "disabled";
};
saradc: adc@8680 {
compatible = "amlogic,meson-saradc";
reg = <0x0 0x8680 0x0 0x34>;
#io-channel-cells = <1>;
interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
pwm_ef: pwm@86c0 {
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
reg = <0x0 0x086c0 0x0 0x10>;
......@@ -264,6 +298,25 @@ gic: interrupt-controller@c4301000 {
#address-cells = <0>;
};
sram: sram@c8000000 {
compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
reg = <0x0 0xc8000000 0x0 0x14000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0xc8000000 0x14000>;
cpu_scp_lpri: scp-shmem@0 {
compatible = "amlogic,meson-gxbb-scp-shmem";
reg = <0x13000 0x400>;
};
cpu_scp_hpri: scp-shmem@200 {
compatible = "amlogic,meson-gxbb-scp-shmem";
reg = <0x13400 0x400>;
};
};
aobus: aobus@c8100000 {
compatible = "simple-bus";
reg = <0x0 0xc8100000 0x0 0x100000>;
......@@ -279,6 +332,21 @@ uart_AO: serial@4c0 {
status = "disabled";
};
uart_AO_B: serial@4e0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x004e0 0x0 0x14>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
pwm_AO_ab: pwm@550 {
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
reg = <0x0 0x00550 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
ir: ir@580 {
compatible = "amlogic,meson-gxbb-ir";
reg = <0x0 0x00580 0x0 0x40>;
......
......@@ -45,10 +45,55 @@
/dts-v1/;
#include "meson-gxbb-p20x.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "amlogic,p200", "amlogic,meson-gxbb";
model = "Amlogic Meson GXBB P200 Development Board";
avdd18_usb_adc: regulator-avdd18_usb_adc {
compatible = "regulator-fixed";
regulator-name = "AVDD18_USB_ADC";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
adc_keys {
compatible = "adc-keys";
io-channels = <&saradc 0>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
button-home {
label = "Home";
linux,code = <KEY_HOME>;
press-threshold-microvolt = <900000>; /* 50% */
};
button-esc {
label = "Esc";
linux,code = <KEY_ESC>;
press-threshold-microvolt = <684000>; /* 38% */
};
button-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
press-threshold-microvolt = <468000>; /* 26% */
};
button-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
press-threshold-microvolt = <252000>; /* 14% */
};
button-menu {
label = "Menu";
linux,code = <KEY_MENU>;
press-threshold-microvolt = <0>; /* 0% */
};
};
};
&i2c_B {
......@@ -56,3 +101,8 @@ &i2c_B {
pinctrl-0 = <&i2c_b_pins>;
pinctrl-names = "default";
};
&saradc {
status = "okay";
vref-supply = <&avdd18_usb_adc>;
};
......@@ -53,6 +53,17 @@ chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
blue {
label = "vega-s95:blue:on";
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
default-state = "on";
panic-indicator;
};
};
usb_vbus: regulator-usb0-vbus {
compatible = "regulator-fixed";
......
/*
* Copyright (c) 2016 BayLibre, Inc.
* Author: Neil Armstrong <narmstrong@baylibre.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxbb-p20x.dtsi"
/ {
compatible = "wetek,hub", "amlogic,meson-gxbb";
model = "WeTek Hub";
leds {
compatible = "gpio-leds";
system {
label = "wetek-play:system-status";
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
default-state = "on";
panic-indicator;
};
};
cvbs-connector {
status = "disabled";
};
};
/*
* Copyright (c) 2016 BayLibre, Inc.
* Author: Neil Armstrong <narmstrong@baylibre.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxbb-p20x.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "wetek,play2", "amlogic,meson-gxbb";
model = "WeTek Play 2";
leds {
compatible = "gpio-leds";
system {
label = "wetek-play:system-status";
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
default-state = "on";
panic-indicator;
};
wifi {
label = "wetek-play:wifi-status";
gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
ethernet {
label = "wetek-play:ethernet-status";
gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
button@0 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
};
};
};
&i2c_A {
status = "okay";
pinctrl-0 = <&i2c_a_pins>;
pinctrl-names = "default";
};
......@@ -50,28 +50,6 @@
/ {
compatible = "amlogic,meson-gxbb";
scpi {
compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
mboxes = <&mailbox 1 &mailbox 2>;
shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
clocks {
compatible = "arm,scpi-clocks";
scpi_dvfs: scpi_clocks@0 {
compatible = "arm,scpi-dvfs-clocks";
#clock-cells = <1>;
clock-indices = <0>;
clock-output-names = "vcpu";
};
};
scpi_sensors: sensors {
compatible = "arm,scpi-sensors";
#thermal-sensor-cells = <1>;
};
};
soc {
usb0_phy: phy@c0000000 {
compatible = "amlogic,meson-gxbb-usb2-phy";
......@@ -93,25 +71,6 @@ usb1_phy: phy@c0000020 {
status = "disabled";
};
sram: sram@c8000000 {
compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
reg = <0x0 0xc8000000 0x0 0x14000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0xc8000000 0x14000>;
cpu_scp_lpri: scp-shmem@0 {
compatible = "amlogic,meson-gxbb-scp-shmem";
reg = <0x13000 0x400>;
};
cpu_scp_hpri: scp-shmem@200 {
compatible = "amlogic,meson-gxbb-scp-shmem";
reg = <0x13400 0x400>;
};
};
usb0: usb@c9000000 {
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
reg = <0x0 0xc9000000 0x0 0x40000>;
......@@ -138,22 +97,6 @@ usb1: usb@c9100000 {
};
};
&cpu0 {
clocks = <&scpi_dvfs 0>;
};
&cpu1 {
clocks = <&scpi_dvfs 0>;
};
&cpu2 {
clocks = <&scpi_dvfs 0>;
};
&cpu3 {
clocks = <&scpi_dvfs 0>;
};
&cbus {
spifc: spi@8c80 {
compatible = "amlogic,meson-gxbb-spifc";
......@@ -195,6 +138,29 @@ mux {
};
};
uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
mux {
groups = "uart_cts_ao_a",
"uart_rts_ao_a";
function = "uart_ao";
};
};
uart_ao_b_pins: uart_ao_b {
mux {
groups = "uart_tx_ao_b", "uart_rx_ao_b";
function = "uart_ao_b";
};
};
uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
mux {
groups = "uart_cts_ao_b",
"uart_rts_ao_b";
function = "uart_ao_b";
};
};
remote_input_ao_pins: remote_input_ao {
mux {
groups = "remote_input_ao";
......@@ -340,6 +306,14 @@ mux {
};
};
uart_a_cts_rts_pins: uart_a_cts_rts {
mux {
groups = "uart_cts_a",
"uart_rts_a";
function = "uart_a";
};
};
uart_b_pins: uart_b {
mux {
groups = "uart_tx_b",
......@@ -348,6 +322,14 @@ mux {
};
};
uart_b_cts_rts_pins: uart_b_cts_rts {
mux {
groups = "uart_cts_b",
"uart_rts_b";
function = "uart_b";
};
};
uart_c_pins: uart_c {
mux {
groups = "uart_tx_c",
......@@ -356,6 +338,14 @@ mux {
};
};
uart_c_cts_rts_pins: uart_c_cts_rts {
mux {
groups = "uart_cts_c",
"uart_rts_c";
function = "uart_c";
};
};
i2c_a_pins: i2c_a {
mux {
groups = "i2c_sck_a",
......@@ -463,6 +453,20 @@ mux {
function = "pwm_f_y";
};
};
hdmi_hpd_pins: hdmi_hpd {
mux {
groups = "hdmi_hpd";
function = "hdmi_hpd";
};
};
hdmi_i2c_pins: hdmi_i2c {
mux {
groups = "hdmi_sda", "hdmi_scl";
function = "hdmi_i2c";
};
};
};
};
......@@ -486,6 +490,16 @@ &i2c_C {
clocks = <&clkc CLKID_I2C>;
};
&saradc {
compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
clocks = <&xtal>,
<&clkc CLKID_SAR_ADC>,
<&clkc CLKID_SANA>,
<&clkc CLKID_SAR_ADC_CLK>,
<&clkc CLKID_SAR_ADC_SEL>;
clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
};
&sd_emmc_a {
clocks = <&clkc CLKID_SD_EMMC_A>,
<&xtal>,
......
......@@ -88,12 +88,42 @@ mux {
};
};
uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
mux {
groups = "uart_cts_ao_a",
"uart_rts_ao_a";
function = "uart_ao";
};
};
uart_ao_b_pins: uart_ao_b {
mux {
groups = "uart_tx_ao_b", "uart_rx_ao_b";
function = "uart_ao_b";
};
};
uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
mux {
groups = "uart_cts_ao_b",
"uart_rts_ao_b";
function = "uart_ao_b";
};
};
remote_input_ao_pins: remote_input_ao {
mux {
groups = "remote_input_ao";
function = "remote_input_ao";
};
};
pwm_ao_b_pins: pwm_ao_b {
mux {
groups = "pwm_ao_b";
function = "pwm_ao_b";
};
};
};
};
......@@ -163,6 +193,14 @@ mux {
};
};
uart_a_cts_rts_pins: uart_a_cts_rts {
mux {
groups = "uart_cts_a",
"uart_rts_a";
function = "uart_a";
};
};
uart_b_pins: uart_b {
mux {
groups = "uart_tx_b",
......@@ -171,6 +209,14 @@ mux {
};
};
uart_b_cts_rts_pins: uart_b_cts_rts {
mux {
groups = "uart_cts_b",
"uart_rts_b";
function = "uart_b";
};
};
uart_c_pins: uart_c {
mux {
groups = "uart_tx_c",
......@@ -179,6 +225,14 @@ mux {
};
};
uart_c_cts_rts_pins: uart_c_cts_rts {
mux {
groups = "uart_cts_c",
"uart_rts_c";
function = "uart_c";
};
};
i2c_a_pins: i2c_a {
mux {
groups = "i2c_sck_a",
......@@ -229,6 +283,20 @@ mux {
function = "pwm_e";
};
};
hdmi_hpd_pins: hdmi_hpd {
mux {
groups = "hdmi_hpd";
function = "hdmi_hpd";
};
};
hdmi_i2c_pins: hdmi_i2c {
mux {
groups = "hdmi_sda", "hdmi_scl";
function = "hdmi_i2c";
};
};
};
eth-phy-mux {
......@@ -279,6 +347,16 @@ &i2c_C {
clocks = <&clkc CLKID_I2C>;
};
&saradc {
compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
clocks = <&xtal>,
<&clkc CLKID_SAR_ADC>,
<&clkc CLKID_SANA>,
<&clkc CLKID_SAR_ADC_CLK>,
<&clkc CLKID_SAR_ADC_SEL>;
clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
};
&sd_emmc_a {
clocks = <&clkc CLKID_SD_EMMC_A>,
<&xtal>,
......
......@@ -85,6 +85,7 @@ cpu4: cpu@100 {
reg = <0x0 0x100>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
};
cpu5: cpu@101 {
......@@ -93,6 +94,7 @@ cpu5: cpu@101 {
reg = <0x0 0x101>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
};
cpu6: cpu@102 {
......@@ -101,6 +103,7 @@ cpu6: cpu@102 {
reg = <0x0 0x102>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
};
cpu7: cpu@103 {
......@@ -109,10 +112,21 @@ cpu7: cpu@103 {
reg = <0x0 0x103>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
};
};
};
&saradc {
compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
};
&scpi_dvfs {
clock-indices = <0 1>;
clock-output-names = "vbig", "vlittle";
};
&vpu {
compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
};
......@@ -564,6 +564,46 @@ static struct clk_gate gxbb_clk81 = {
},
};
static struct clk_mux gxbb_sar_adc_clk_sel = {
.reg = (void *)HHI_SAR_CLK_CNTL,
.mask = 0x3,
.shift = 9,
.lock = &clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sar_adc_clk_sel",
.ops = &clk_mux_ops,
/* NOTE: The datasheet doesn't list the parents for bit 10 */
.parent_names = (const char *[]){ "xtal", "clk81", },
.num_parents = 2,
},
};
static struct clk_divider gxbb_sar_adc_clk_div = {
.reg = (void *)HHI_SAR_CLK_CNTL,
.shift = 0,
.width = 8,
.lock = &clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sar_adc_clk_div",
.ops = &clk_divider_ops,
.parent_names = (const char *[]){ "sar_adc_clk_sel" },
.num_parents = 1,
},
};
static struct clk_gate gxbb_sar_adc_clk = {
.reg = (void *)HHI_SAR_CLK_CNTL,
.bit_idx = 8,
.lock = &clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sar_adc_clk",
.ops = &clk_gate_ops,
.parent_names = (const char *[]){ "sar_adc_clk_div" },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
/* Everything Else (EE) domain gates */
static MESON_GATE(gxbb_ddr, HHI_GCLK_MPEG0, 0);
static MESON_GATE(gxbb_dos, HHI_GCLK_MPEG0, 1);
......@@ -754,6 +794,9 @@ static struct clk_hw_onecell_data gxbb_hw_onecell_data = {
[CLKID_SD_EMMC_A] = &gxbb_emmc_a.hw,
[CLKID_SD_EMMC_B] = &gxbb_emmc_b.hw,
[CLKID_SD_EMMC_C] = &gxbb_emmc_c.hw,
[CLKID_SAR_ADC_CLK] = &gxbb_sar_adc_clk.hw,
[CLKID_SAR_ADC_SEL] = &gxbb_sar_adc_clk_sel.hw,
[CLKID_SAR_ADC_DIV] = &gxbb_sar_adc_clk_div.hw,
},
.num = NR_CLKS,
};
......@@ -856,6 +899,7 @@ static struct clk_gate *gxbb_clk_gates[] = {
&gxbb_emmc_a,
&gxbb_emmc_b,
&gxbb_emmc_c,
&gxbb_sar_adc_clk,
};
static int gxbb_clkc_probe(struct platform_device *pdev)
......@@ -888,6 +932,10 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
gxbb_mpeg_clk_sel.reg = clk_base + (u64)gxbb_mpeg_clk_sel.reg;
gxbb_mpeg_clk_div.reg = clk_base + (u64)gxbb_mpeg_clk_div.reg;
/* Populate the base address for the SAR ADC clks */
gxbb_sar_adc_clk_sel.reg = clk_base + (u64)gxbb_sar_adc_clk_sel.reg;
gxbb_sar_adc_clk_div.reg = clk_base + (u64)gxbb_sar_adc_clk_div.reg;
/* Populate base address for gates */
for (i = 0; i < ARRAY_SIZE(gxbb_clk_gates); i++)
gxbb_clk_gates[i]->reg = clk_base +
......
......@@ -191,7 +191,7 @@
#define CLKID_PERIPHS 20
#define CLKID_SPICC 21
/* CLKID_I2C */
#define CLKID_SAR_ADC 23
/* #define CLKID_SAR_ADC */
#define CLKID_SMART_CARD 24
#define CLKID_RNG0 25
#define CLKID_UART0 26
......@@ -204,7 +204,7 @@
#define CLKID_ASSIST_MISC 33
/* CLKID_SPI */
#define CLKID_I2S_SPDIF 35
#define CLKID_ETH 36
/* CLKID_ETH */
#define CLKID_DEMUX 37
#define CLKID_AIU_GLUE 38
#define CLKID_IEC958 39
......@@ -231,13 +231,13 @@
#define CLKID_AHB_DATA_BUS 60
#define CLKID_AHB_CTRL_BUS 61
#define CLKID_HDMI_INTR_SYNC 62
#define CLKID_HDMI_PCLK 63
/* CLKID_HDMI_PCLK */
/* CLKID_USB1_DDR_BRIDGE */
/* CLKID_USB0_DDR_BRIDGE */
#define CLKID_MMC_PCLK 66
#define CLKID_DVIN 67
#define CLKID_UART2 68
#define CLKID_SANA 69
/* #define CLKID_SANA */
#define CLKID_VPU_INTR 70
#define CLKID_SEC_AHB_AHB3_BRIDGE 71
#define CLKID_CLK81_A53 72
......@@ -245,7 +245,7 @@
#define CLKID_VCLK2_VENCI1 74
#define CLKID_VCLK2_VENCP0 75
#define CLKID_VCLK2_VENCP1 76
#define CLKID_GCLK_VENCI_INT0 77
/* CLKID_GCLK_VENCI_INT0 */
#define CLKID_GCLK_VENCI_INT 78
#define CLKID_DAC_CLK 79
#define CLKID_AOCLK_GATE 80
......@@ -265,8 +265,11 @@
/* CLKID_SD_EMMC_A */
/* CLKID_SD_EMMC_B */
/* CLKID_SD_EMMC_C */
/* CLKID_SAR_ADC_CLK */
/* CLKID_SAR_ADC_SEL */
#define CLKID_SAR_ADC_DIV 99
#define NR_CLKS 97
#define NR_CLKS 100
/* include the CLKIDs that have been made part of the stable DT binding */
#include <dt-bindings/clock/gxbb-clkc.h>
......
......@@ -14,15 +14,21 @@
#define CLKID_MPLL2 15
#define CLKID_SPI 34
#define CLKID_I2C 22
#define CLKID_SAR_ADC 23
#define CLKID_ETH 36
#define CLKID_USB0 50
#define CLKID_USB1 51
#define CLKID_USB 55
#define CLKID_HDMI_PCLK 63
#define CLKID_USB1_DDR_BRIDGE 64
#define CLKID_USB0_DDR_BRIDGE 65
#define CLKID_SANA 69
#define CLKID_GCLK_VENCI_INT0 77
#define CLKID_AO_I2C 93
#define CLKID_SD_EMMC_A 94
#define CLKID_SD_EMMC_B 95
#define CLKID_SD_EMMC_C 96
#define CLKID_SAR_ADC_CLK 97
#define CLKID_SAR_ADC_SEL 98
#endif /* __GXBB_CLKC_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment