Commit 3fccdfd8 authored by Takashi Iwai's avatar Takashi Iwai

ALSA: hda - Allow multi-io with HP output for ALC662 & co

Even if the machine has no line-out but only HP-out, try to detect the
multi-io.  It'll allow more possibilities for 5.1 outputs on laptops.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent efb9f469
......@@ -18983,6 +18983,7 @@ static int alc662_auto_fill_dac_nids(struct hda_codec *codec,
hda_nid_t dac;
spec->multiout.dac_nids = spec->private_dac_nids;
spec->multiout.num_dacs = 0;
for (i = 0; i < cfg->line_outs; i++) {
dac = alc_auto_look_for_dac(codec, cfg->line_out_pins[i]);
if (!dac)
......@@ -19317,8 +19318,20 @@ static int alc_auto_add_multi_channel_mode(struct hda_codec *codec)
unsigned int location, defcfg;
int num_pins;
if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT && cfg->hp_outs == 1) {
/* use HP as primary out */
cfg->speaker_outs = cfg->line_outs;
memcpy(cfg->speaker_pins, cfg->line_out_pins,
sizeof(cfg->speaker_pins));
cfg->line_outs = cfg->hp_outs;
memcpy(cfg->line_out_pins, cfg->hp_pins, sizeof(cfg->hp_pins));
cfg->hp_outs = 0;
memset(cfg->hp_pins, 0, sizeof(cfg->hp_pins));
cfg->line_out_type = AUTO_PIN_HP_OUT;
alc662_auto_fill_dac_nids(codec, cfg);
}
if (cfg->line_outs != 1 ||
cfg->line_out_type != AUTO_PIN_LINE_OUT)
cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
return 0;
defcfg = snd_hda_codec_get_pincfg(codec, cfg->line_out_pins[0]);
......@@ -19339,6 +19352,8 @@ static int alc_auto_add_multi_channel_mode(struct hda_codec *codec)
spec->multi_ios = num_pins;
spec->ext_channel_count = 2;
spec->multiout.num_dacs = num_pins + 1;
/* for avoiding multi HP mixers */
cfg->line_out_type = AUTO_PIN_LINE_OUT;
}
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment