Commit 3fe7c4c9 authored by Rafael J. Wysocki's avatar Rafael J. Wysocki Committed by David S. Miller

net/igb: Fix kexec with igb (rev. 3)

Impact: Fix

Yinghai Lu found one system with 82575EB where, in the kernel that is
kexeced, probe igb failed with -2, the reason being that the adapter
could not be brought back from D3 by the kexec kernel, most probably
due to quirky hardware (it looks like the same behavior happened on
forcedeth).

Prevent igb from putting the adapter into D3 during shutdown except
when we going to power off the system.  For this purpose, seperate
igb_shutdown() from igb_suspend() and use the appropriate PCI PM
callbacks in both of them.
Signed-off-by: default avatar"Rafael J. Wysocki" <rjw@sisk.pl>
Reported-by: default avatarYinghai Lu <yinghai@kernel.org>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent cdfa9f64
......@@ -135,8 +135,8 @@ static inline int igb_set_vf_rlpml(struct igb_adapter *, int, int);
static int igb_set_vf_mac(struct igb_adapter *adapter, int, unsigned char *);
static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
static int igb_suspend(struct pci_dev *, pm_message_t);
#ifdef CONFIG_PM
static int igb_suspend(struct pci_dev *, pm_message_t);
static int igb_resume(struct pci_dev *);
#endif
static void igb_shutdown(struct pci_dev *);
......@@ -5060,7 +5060,7 @@ int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx)
return 0;
}
static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct igb_adapter *adapter = netdev_priv(netdev);
......@@ -5119,15 +5119,9 @@ static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
wr32(E1000_WUFC, 0);
}
/* make sure adapter isn't asleep if manageability/wol is enabled */
if (wufc || adapter->en_mng_pt) {
pci_enable_wake(pdev, PCI_D3hot, 1);
pci_enable_wake(pdev, PCI_D3cold, 1);
} else {
*enable_wake = wufc || adapter->en_mng_pt;
if (!*enable_wake)
igb_shutdown_fiber_serdes_link_82575(hw);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
}
/* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant. */
......@@ -5135,12 +5129,29 @@ static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
pci_disable_device(pdev);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
}
#ifdef CONFIG_PM
static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
{
int retval;
bool wake;
retval = __igb_shutdown(pdev, &wake);
if (retval)
return retval;
if (wake) {
pci_prepare_to_sleep(pdev);
} else {
pci_wake_from_d3(pdev, false);
pci_set_power_state(pdev, PCI_D3hot);
}
return 0;
}
static int igb_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
......@@ -5193,7 +5204,14 @@ static int igb_resume(struct pci_dev *pdev)
static void igb_shutdown(struct pci_dev *pdev)
{
igb_suspend(pdev, PMSG_SUSPEND);
bool wake;
__igb_shutdown(pdev, &wake);
if (system_state == SYSTEM_POWER_OFF) {
pci_wake_from_d3(pdev, wake);
pci_set_power_state(pdev, PCI_D3hot);
}
}
#ifdef CONFIG_NET_POLL_CONTROLLER
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment