atari_scsi: Convert to platform device

Convert atari_scsi to platform device and eliminate scsi_register().

Validate __setup options later on so that module options are checked as well.

Remove the comment about the scsi mid-layer disabling the host irq as it
is no longer true (AFAICT). Also remove the obsolete slow interrupt stuff
(IRQ_TYPE_SLOW == 0 anyway).
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

arch/m68k/atari/config.c

@@ -858,6 +858,24 @@ static struct platform_device *atari_netusbee_devices[] __initdata = {
 };
 #endif /* CONFIG_ATARI_ETHERNEC */
 
+#ifdef CONFIG_ATARI_SCSI
+static const struct resource atari_scsi_st_rsrc[] __initconst = {
+	{
+		.flags = IORESOURCE_IRQ,
+		.start = IRQ_MFP_FSCSI,
+		.end   = IRQ_MFP_FSCSI,
+	},
+};
+
+static const struct resource atari_scsi_tt_rsrc[] __initconst = {
+	{
+		.flags = IORESOURCE_IRQ,
+		.start = IRQ_TT_MFP_SCSI,
+		.end   = IRQ_TT_MFP_SCSI,
+	},
+};
+#endif
+
 int __init atari_platform_init(void)
 {
 	int rv = 0;
@@ -892,6 +910,15 @@ int __init atari_platform_init(void)
 	}
 #endif
 
+#ifdef CONFIG_ATARI_SCSI
+	if (ATARIHW_PRESENT(ST_SCSI))
+		platform_device_register_simple("atari_scsi", -1,
+			atari_scsi_st_rsrc, ARRAY_SIZE(atari_scsi_st_rsrc));
+	else if (ATARIHW_PRESENT(TT_SCSI))
+		platform_device_register_simple("atari_scsi", -1,
+			atari_scsi_tt_rsrc, ARRAY_SIZE(atari_scsi_tt_rsrc));
+#endif
+
 	return rv;
 }
 

drivers/scsi/atari_scsi.h

@@ -18,23 +18,6 @@
 /* (I_HAVE_OVERRUNS stuff removed) */
 
 #ifndef ASM
-/* The values for CMD_PER_LUN and CAN_QUEUE are somehow arbitrary. Higher
- * values should work, too; try it! (but cmd_per_lun costs memory!) */
-
-/* But there seems to be a bug somewhere that requires CAN_QUEUE to be
- * 2*CMD_PER_LUN. At least on a TT, no spurious timeouts seen since
- * changed CMD_PER_LUN... */
-
-/* Note: The Falcon currently uses 8/1 setting due to unsolved problems with
- * cmd_per_lun != 1 */
-
-#define ATARI_TT_CAN_QUEUE		16
-#define ATARI_TT_CMD_PER_LUN		8
-#define ATARI_TT_SG_TABLESIZE		SG_ALL
-
-#define ATARI_FALCON_CAN_QUEUE		8
-#define ATARI_FALCON_CMD_PER_LUN	1
-#define ATARI_FALCON_SG_TABLESIZE	SG_NONE
 
 #define	NCR5380_implementation_fields	/* none */