rtw88: Use secondary channel offset enumeration

The hardware value of secondary channel offset isn't very intuitive. This
commit adds enumeration, so we can easier to check the logic with the
suffix of enumeration name, likes _UPPER or _LOWER.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Reviewed-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/realtek/rtw88/mac.c

@@ -17,10 +17,10 @@ void rtw_set_channel_mac(struct rtw_dev *rtwdev, u8 channel, u8 bw,
 
 	txsc20 = primary_ch_idx;
 	if (bw == RTW_CHANNEL_WIDTH_80) {
-		if (txsc20 == 1 || txsc20 == 3)
-			txsc40 = 9;
+		if (txsc20 == RTW_SC_20_UPPER || txsc20 == RTW_SC_20_UPMOST)
+			txsc40 = RTW_SC_40_UPPER;
 		else
-			txsc40 = 10;
+			txsc40 = RTW_SC_40_LOWER;
 	}
 	rtw_write8(rtwdev, REG_DATA_SC,
 		   BIT_TXSC_20M(txsc20) | BIT_TXSC_40M(txsc40));

drivers/net/wireless/realtek/rtw88/main.c

@@ -317,15 +317,15 @@ void rtw_get_channel_params(struct cfg80211_chan_def *chandef,
 	case NL80211_CHAN_WIDTH_20_NOHT:
 	case NL80211_CHAN_WIDTH_20:
 		bandwidth = RTW_CHANNEL_WIDTH_20;
-		primary_chan_idx = 0;
+		primary_chan_idx = RTW_SC_DONT_CARE;
 		break;
 	case NL80211_CHAN_WIDTH_40:
 		bandwidth = RTW_CHANNEL_WIDTH_40;
 		if (primary_freq > center_freq) {
-			primary_chan_idx = 1;
+			primary_chan_idx = RTW_SC_20_UPPER;
 			center_chan -= 2;
 		} else {
-			primary_chan_idx = 2;
+			primary_chan_idx = RTW_SC_20_LOWER;
 			center_chan += 2;
 		}
 		break;
@@ -333,10 +333,10 @@ void rtw_get_channel_params(struct cfg80211_chan_def *chandef,
 		bandwidth = RTW_CHANNEL_WIDTH_80;
 		if (primary_freq > center_freq) {
 			if (primary_freq - center_freq == 10) {
-				primary_chan_idx = 1;
+				primary_chan_idx = RTW_SC_20_UPPER;
 				center_chan -= 2;
 			} else {
-				primary_chan_idx = 3;
+				primary_chan_idx = RTW_SC_20_UPMOST;
 				center_chan -= 6;
 			}
 			/* assign the center channel used
@@ -345,10 +345,10 @@ void rtw_get_channel_params(struct cfg80211_chan_def *chandef,
 			cch_by_bw[RTW_CHANNEL_WIDTH_40] = center_chan + 4;
 		} else {
 			if (center_freq - primary_freq == 10) {
-				primary_chan_idx = 2;
+				primary_chan_idx = RTW_SC_20_LOWER;
 				center_chan += 2;
 			} else {
-				primary_chan_idx = 4;
+				primary_chan_idx = RTW_SC_20_LOWEST;
 				center_chan += 6;
 			}
 			/* assign the center channel used

drivers/net/wireless/realtek/rtw88/main.h

@@ -99,6 +99,16 @@ enum rtw_bandwidth {
 	RTW_CHANNEL_WIDTH_10	= 6,
 };
 
+enum rtw_sc_offset {
+	RTW_SC_DONT_CARE	= 0,
+	RTW_SC_20_UPPER		= 1,
+	RTW_SC_20_LOWER		= 2,
+	RTW_SC_20_UPMOST	= 3,
+	RTW_SC_20_LOWEST	= 4,
+	RTW_SC_40_UPPER		= 9,
+	RTW_SC_40_LOWER		= 10,
+};
+
 enum rtw_net_type {
 	RTW_NET_NO_LINK		= 0,
 	RTW_NET_AD_HOC		= 1,

drivers/net/wireless/realtek/rtw88/rtw8822b.c

@@ -645,7 +645,7 @@ static void rtw8822b_set_channel_bb(struct rtw_dev *rtwdev, u8 channel, u8 bw,
 		rtw_write32_mask(rtwdev, REG_ADC160, BIT(30), 0x1);
 		break;
 	case RTW_CHANNEL_WIDTH_40:
-		if (primary_ch_idx == 1)
+		if (primary_ch_idx == RTW_SC_20_UPPER)
 			rtw_write32_set(rtwdev, REG_RXSB, BIT(4));
 		else
 			rtw_write32_clr(rtwdev, REG_RXSB, BIT(4));

drivers/net/wireless/realtek/rtw88/rtw8822c.c

@@ -1482,7 +1482,7 @@ static void rtw8822c_set_channel_bb(struct rtw_dev *rtwdev, u8 channel, u8 bw,
 		break;
 	case RTW_CHANNEL_WIDTH_40:
 		rtw_write32_mask(rtwdev, REG_CCKSB, BIT(4),
-				 (primary_ch_idx == 1 ? 1 : 0));
+				 (primary_ch_idx == RTW_SC_20_UPPER ? 1 : 0));
 		rtw_write32_mask(rtwdev, REG_TXBWCTL, 0xf, 0x5);
 		rtw_write32_mask(rtwdev, REG_TXBWCTL, 0xc0, 0x0);
 		rtw_write32_mask(rtwdev, REG_TXBWCTL, 0xff00,