[ARM] 4822/1: RealView: Change the REALVIEW_MPCORE configuration option

This patch changes the REALVIEW_MPCORE configuration option to
REALVIEW_EB_ARM11MP since this is only specific to RealView/EB.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/Kconfig

@@ -611,7 +611,7 @@ source "kernel/time/Kconfig"
 
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && REALVIEW_MPCORE
+	depends on EXPERIMENTAL && REALVIEW_EB_ARM11MP
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -645,7 +645,7 @@ config HOTPLUG_CPU
 
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
-	depends on SMP && REALVIEW_MPCORE
+	depends on SMP && REALVIEW_EB_ARM11MP
 	default y
 	help
 	  Enable support for local timers on SMP platforms, rather then the

arch/arm/mach-realview/Kconfig

@@ -7,24 +7,21 @@ config MACH_REALVIEW_EB
 	help
 	  Include support for the ARM(R) RealView Emulation Baseboard platform.
 
-config REALVIEW_MPCORE
-	bool "Support MPcore tile"
+config REALVIEW_EB_ARM11MP
+	bool "Support ARM11MPCore tile"
 	depends on MACH_REALVIEW_EB
 	select CACHE_L2X0
 	help
-	  Enable support for the MPCore tile on the Realview platform.
-	  Since there are device address and interrupt differences, a
-	  kernel built with this option enabled is not compatible with
-	  other tiles.
+	  Enable support for the ARM11MPCore tile on the Realview platform.
 
-config REALVIEW_MPCORE_REVB
-	bool "Support MPcore RevB tile"
-	depends on REALVIEW_MPCORE
+config REALVIEW_EB_ARM11MP_REVB
+	bool "Support ARM11MPCore RevB tile"
+	depends on REALVIEW_EB_ARM11MP
 	default n
 	help
-	  Enable support for the MPCore RevB tile on the Realview platform.
-	  Since there are device address differences, a
+	  Enable support for the ARM11MPCore RevB tile on the Realview
+	  platform. Since there are device address differences, a
 	  kernel built with this option enabled is not compatible with
-	  other tiles.
+	  other revisions of the ARM11MPCore tile.
 
 endmenu

arch/arm/mach-realview/realview_eb.c

@@ -261,7 +261,7 @@ static void __init gic_init_irq(void)
 		gic_dist_init(0, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE), 29);
 		gic_cpu_init(0, gic_cpu_base_addr);
 
-#ifndef CONFIG_REALVIEW_MPCORE_REVB
+#ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
 		/* board GIC, secondary */
 		gic_dist_init(1, __io_address(REALVIEW_GIC_DIST_BASE), 64);
 		gic_cpu_init(1, __io_address(REALVIEW_GIC_CPU_BASE));

include/asm-arm/arch-realview/board-eb.h

@@ -26,7 +26,7 @@
 /*
  * RealView EB + ARM11MPCore peripheral addresses
  */
-#ifdef CONFIG_REALVIEW_MPCORE_REVB
+#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
 #define REALVIEW_EB11MP_SCU_BASE	0x10100000	/* SCU registers */
 #define REALVIEW_EB11MP_GIC_CPU_BASE	0x10100100	/* Generic interrupt controller CPU interface */
 #define REALVIEW_EB11MP_TWD_BASE	0x10100700
@@ -143,7 +143,7 @@
 #define NR_IRQS			NR_IRQS_EB
 #endif
 
-#if defined(CONFIG_REALVIEW_MPCORE) \
+#if defined(CONFIG_REALVIEW_EB_ARM11MP) \
 	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
 #undef MAX_GIC_NR
 #define MAX_GIC_NR		NR_GIC_EB11MP
@@ -162,7 +162,7 @@
 	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK)	\
 	 == proc_type)
 
-#ifdef CONFIG_REALVIEW_MPCORE
+#ifdef CONFIG_REALVIEW_EB_ARM11MP
 #define core_tile_eb11mp()	check_eb_proc(REALVIEW_EB_PROC_ARM11MP)
 #else
 #define core_tile_eb11mp()	0