x86: lock bitops

I missed an obvious one!

x86 CPUs are defined not to reorder stores past earlier loads, so there is
no hardware memory barrier required to implement a release-consistent store
(all stores are, by definition).

So ditch the generic lock bitops, and implement optimised versions for x86,
which removes the mfence from __clear_bit_unlock (which is already a useful
primitive for SLUB).
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

include/asm-x86/bitops_32.h

@@ -80,6 +80,20 @@ static inline void clear_bit(int nr, volatile unsigned long * addr)
 		:"Ir" (nr));
 }
 
+/*
+ * clear_bit_unlock - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and implies release semantics before the memory
+ * operation. It can be used for an unlock.
+ */
+static inline void clear_bit_unlock(unsigned long nr, volatile unsigned long *addr)
+{
+	barrier();
+	clear_bit(nr, addr);
+}
+
 static inline void __clear_bit(int nr, volatile unsigned long * addr)
 {
 	__asm__ __volatile__(
@@ -87,6 +101,25 @@ static inline void __clear_bit(int nr, volatile unsigned long * addr)
 		:"+m" (ADDR)
 		:"Ir" (nr));
 }
+
+/*
+ * __clear_bit_unlock - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * __clear_bit() is non-atomic and implies release semantics before the memory
+ * operation. It can be used for an unlock if no other CPUs can concurrently
+ * modify other bits in the word.
+ *
+ * No memory barrier is required here, because x86 cannot reorder stores past
+ * older loads. Same principle as spin_unlock.
+ */
+static inline void __clear_bit_unlock(unsigned long nr, volatile unsigned long *addr)
+{
+	barrier();
+	__clear_bit(nr, addr);
+}
+
 #define smp_mb__before_clear_bit()	barrier()
 #define smp_mb__after_clear_bit()	barrier()
 
@@ -145,6 +178,15 @@ static inline int test_and_set_bit(int nr, volatile unsigned long * addr)
 	return oldbit;
 }
 
+/**
+ * test_and_set_bit_lock - Set a bit and return its old value for lock
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This is the same as test_and_set_bit on x86
+ */
+#define test_and_set_bit_lock test_and_set_bit
+
 /**
  * __test_and_set_bit - Set a bit and return its old value
  * @nr: Bit to set
@@ -406,7 +448,6 @@ static inline int fls(int x)
 }
 
 #include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
 
 #endif /* __KERNEL__ */
 

include/asm-x86/bitops_64.h

@@ -72,6 +72,20 @@ static __inline__ void clear_bit(int nr, volatile void * addr)
 		:"dIr" (nr));
 }
 
+/*
+ * clear_bit_unlock - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and implies release semantics before the memory
+ * operation. It can be used for an unlock.
+ */
+static inline void clear_bit_unlock(unsigned long nr, volatile unsigned long *addr)
+{
+	barrier();
+	clear_bit(nr, addr);
+}
+
 static __inline__ void __clear_bit(int nr, volatile void * addr)
 {
 	__asm__ __volatile__(
@@ -80,6 +94,24 @@ static __inline__ void __clear_bit(int nr, volatile void * addr)
 		:"dIr" (nr));
 }
 
+/*
+ * __clear_bit_unlock - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * __clear_bit() is non-atomic and implies release semantics before the memory
+ * operation. It can be used for an unlock if no other CPUs can concurrently
+ * modify other bits in the word.
+ *
+ * No memory barrier is required here, because x86 cannot reorder stores past
+ * older loads. Same principle as spin_unlock.
+ */
+static inline void __clear_bit_unlock(unsigned long nr, volatile unsigned long *addr)
+{
+	barrier();
+	__clear_bit(nr, addr);
+}
+
 #define smp_mb__before_clear_bit()	barrier()
 #define smp_mb__after_clear_bit()	barrier()
 
@@ -136,6 +168,15 @@ static __inline__ int test_and_set_bit(int nr, volatile void * addr)
 	return oldbit;
 }
 
+/**
+ * test_and_set_bit_lock - Set a bit and return its old value for lock
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This is the same as test_and_set_bit on x86
+ */
+#define test_and_set_bit_lock test_and_set_bit
+
 /**
  * __test_and_set_bit - Set a bit and return its old value
  * @nr: Bit to set
@@ -412,7 +453,6 @@ static __inline__ int fls(int x)
 #define ARCH_HAS_FAST_MULTIPLIER 1
 
 #include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
 
 #endif /* __KERNEL__ */