Skip to content

L
linux
Commit 42ec7868 authored by Vojtech Pavlik's avatar Vojtech Pavlik
Browse files
Options

Remove mouse drivers no longer needed, because these mice are 

now handled by the input subsystem.
parent a49e82a5
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 2 additions and 2289 deletions
drivers/char/Config.help
View file @ 42ec7868
...@@ -633,37 +633,6 @@ CONFIG_BUSMOUSE ...@@ -633,37 +633,6 @@ CONFIG_BUSMOUSE
The module will be called busmouse.o. If you want to compile it as a The module will be called busmouse.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>. module, say M here and read <file:Documentation/modules.txt>.
CONFIG_MOUSE
This is for machines with a mouse which is neither a serial nor a
bus mouse. Examples are PS/2 mice (such as the track balls on some
laptops) and some digitizer pads. Most people have a regular serial
MouseSystem or Microsoft mouse (made by Logitech) that plugs into a
COM port (rectangular with 9 or 25 pins). These people say N here.
If you have something else, read the Busmouse-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. This HOWTO contains
information about all non-serial mice, not just bus mice.
If you have a laptop, you either have to check the documentation or
experiment a bit to find out whether the trackball is a serial mouse
or not; it's best to say Y here for you.
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about non-serial mice. If unsure, say Y.
CONFIG_LOGIBUSMOUSE
Logitech mouse connected to a proprietary interface card. It's
generally a round connector with 9 pins. Note that the newer mice
made by Logitech don't use the Logitech protocol anymore; for those,
you don't need this option. You want to read the Busmouse-HOWTO,
available from <http://www.linuxdoc.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called busmouse.o. If you are unsure, say N and read the
HOWTO nevertheless: it will tell you what you have.
CONFIG_PSMOUSE CONFIG_PSMOUSE
The PS/2 mouse connects to a special mouse port that looks much like The PS/2 mouse connects to a special mouse port that looks much like
the keyboard port (small circular connector with 6 pins). This way, the keyboard port (small circular connector with 6 pins). This way,
...@@ -683,64 +652,6 @@ CONFIG_PSMOUSE ...@@ -683,64 +652,6 @@ CONFIG_PSMOUSE
<ftp://gnu.systemy.it/pub/gpm/>) solves this problem, or you can get <ftp://gnu.systemy.it/pub/gpm/>) solves this problem, or you can get
the "mconv2" utility from <ftp://ibiblio.org/pub/Linux/system/mouse/>. the "mconv2" utility from <ftp://ibiblio.org/pub/Linux/system/mouse/>.
CONFIG_82C710_MOUSE
This is a certain kind of PS/2 mouse used on the TI Travelmate. If
you are unsure, try first to say N here and come back if the mouse
doesn't work. Read the Busmouse-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
CONFIG_PC110_PAD
This drives the digitizer pad on the IBM PC110 palmtop. It can turn
the digitizer pad into a PS/2 mouse emulation with tap gestures or
into an absolute pad.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called pc110pad.o.
CONFIG_MS_BUSMOUSE
These animals (also called Inport mice) are connected to an
expansion board using a round connector with 9 pins. If this is what
you have, say Y and read the Busmouse-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
If you are unsure, say N and read the HOWTO nevertheless: it will
tell you what you have. Also be aware that several vendors talk
about 'Microsoft busmouse' and actually mean PS/2 busmouse -- so
count the pins on the connector.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called msbusmouse.o.
CONFIG_ADBMOUSE
Say Y here if you have this type of bus mouse (4 pin connector) as
is common on Macintoshes. You may want to read the Busmouse-HOWTO,
available from <http://www.linuxdoc.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called adbmouse.o.
CONFIG_ATIXL_BUSMOUSE
This is a rare type of busmouse that is connected to the back of an
ATI video card. Say Y if you have one of those. Note however that
most mice by ATI are actually Microsoft busmice; you should say Y to
"Microsoft busmouse support" above if you have one of those. Read
the Busmouse-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called atixlmouse.o.
If you are unsure, say N and read the HOWTO nevertheless: it will
tell you what you have.
CONFIG_QIC02_TAPE CONFIG_QIC02_TAPE
If you have a non-SCSI tape drive like that, say Y. Or, if you want If you have a non-SCSI tape drive like that, say Y. Or, if you want
to compile this driver as a module ( = code which can be inserted in to compile this driver as a module ( = code which can be inserted in
......
drivers/char/Config.in
View file @ 42ec7868
...@@ -114,22 +114,7 @@ source drivers/i2c/Config.in ...@@ -114,22 +114,7 @@ source drivers/i2c/Config.in
mainmenu_option next_comment mainmenu_option next_comment
comment 'Mice' comment 'Mice'
tristate 'Bus Mouse Support' CONFIG_BUSMOUSE tristate 'Bus Mouse Support' CONFIG_BUSMOUSE
if [ "$CONFIG_BUSMOUSE" != "n" ]; then bool 'PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE
dep_tristate ' ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE $CONFIG_BUSMOUSE
dep_tristate ' Logitech busmouse support' CONFIG_LOGIBUSMOUSE $CONFIG_BUSMOUSE
dep_tristate ' Microsoft busmouse support' CONFIG_MS_BUSMOUSE $CONFIG_BUSMOUSE
if [ "$CONFIG_ADB" = "y" -a "$CONFIG_ADB_KEYBOARD" = "y" ]; then
dep_tristate ' Apple Desktop Bus mouse support (old driver)' CONFIG_ADBMOUSE $CONFIG_BUSMOUSE
fi
fi
tristate 'Mouse Support (not serial and bus mice)' CONFIG_MOUSE
if [ "$CONFIG_MOUSE" != "n" ]; then
bool ' PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE
tristate ' C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE
tristate ' PC110 digitizer pad support' CONFIG_PC110_PAD
fi
endmenu
tristate 'QIC-02 tape support' CONFIG_QIC02_TAPE tristate 'QIC-02 tape support' CONFIG_QIC02_TAPE
if [ "$CONFIG_QIC02_TAPE" != "n" ]; then if [ "$CONFIG_QIC02_TAPE" != "n" ]; then
......
drivers/char/Makefile
View file @ 42ec7868
...@@ -155,8 +155,6 @@ obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o ...@@ -155,8 +155,6 @@ obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o
obj-$(CONFIG_SERIAL_TX3912) += generic_serial.o serial_tx3912.o obj-$(CONFIG_SERIAL_TX3912) += generic_serial.o serial_tx3912.o
obj-$(CONFIG_HVC_CONSOLE) += hvc_console.o obj-$(CONFIG_HVC_CONSOLE) += hvc_console.o
obj-$(CONFIG_ATIXL_BUSMOUSE) += atixlmouse.o
obj-$(CONFIG_LOGIBUSMOUSE) += logibusmouse.o
obj-$(CONFIG_PRINTER) += lp.o obj-$(CONFIG_PRINTER) += lp.o
obj-$(CONFIG_BUSMOUSE) += busmouse.o obj-$(CONFIG_BUSMOUSE) += busmouse.o
...@@ -164,12 +162,7 @@ obj-$(CONFIG_DTLK) += dtlk.o ...@@ -164,12 +162,7 @@ obj-$(CONFIG_DTLK) += dtlk.o
obj-$(CONFIG_R3964) += n_r3964.o obj-$(CONFIG_R3964) += n_r3964.o
obj-$(CONFIG_APPLICOM) += applicom.o obj-$(CONFIG_APPLICOM) += applicom.o
obj-$(CONFIG_SONYPI) += sonypi.o obj-$(CONFIG_SONYPI) += sonypi.o
obj-$(CONFIG_MS_BUSMOUSE) += msbusmouse.o
obj-$(CONFIG_82C710_MOUSE) += qpmouse.o
obj-$(CONFIG_AMIGAMOUSE) += amigamouse.o
obj-$(CONFIG_ATARIMOUSE) += atarimouse.o obj-$(CONFIG_ATARIMOUSE) += atarimouse.o
obj-$(CONFIG_ADBMOUSE) += adbmouse.o
obj-$(CONFIG_PC110_PAD) += pc110pad.o
obj-$(CONFIG_RTC) += rtc.o obj-$(CONFIG_RTC) += rtc.o
obj-$(CONFIG_EFI_RTC) += efirtc.o obj-$(CONFIG_EFI_RTC) += efirtc.o
ifeq ($(CONFIG_PPC),) ifeq ($(CONFIG_PPC),)
...@@ -235,4 +228,4 @@ $(obj)/defkeymap.c $(obj)/qtronixmap.c: $(obj)/%.c: $(src)/%.map ...@@ -235,4 +228,4 @@ $(obj)/defkeymap.c $(obj)/qtronixmap.c: $(obj)/%.c: $(src)/%.map
sed -e 's/^static *//' $@.tmp > $@ sed -e 's/^static *//' $@.tmp > $@
rm $@.tmp rm $@.tmp
endif endif
\ No newline at end of file
drivers/char/adbmouse.c deleted 100644 → 0
View file @ a49e82a5
/*
* Macintosh ADB Mouse driver for Linux
*
* 27 Oct 1997 Michael Schmitz
* logitech fixes by anthony tong
* further hacking by Paul Mackerras
*
* Apple mouse protocol according to:
*
* Device code shamelessly stolen from:
*/
/*
* Atari Mouse Driver for Linux
* by Robert de Vries (robert@and.nl) 19Jul93
*
* 16 Nov 1994 Andreas Schwab
* Compatibility with busmouse
* Support for three button mouse (shamelessly stolen from MiNT)
* third button wired to one of the joystick directions on joystick 1
*
* 1996/02/11 Andreas Schwab
* Module support
* Allow multiple open's
*
* Converted to use new generic busmouse code. 11 July 1998
* Russell King <rmk@arm.uk.linux.org>
*/
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
#include <linux/mm.h>
#include <linux/random.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/adb_mouse.h>
#ifdef __powerpc__
#include <asm/processor.h>
#endif
#if defined(__mc68000__) || defined(MODULE)
#include <asm/setup.h>
#endif
#include "busmouse.h"
static int msedev;
static unsigned char adb_mouse_buttons[16];
extern void (*adb_mouse_interrupt_hook)(unsigned char *, int);
extern int adb_emulate_buttons;
extern int adb_button2_keycode;
extern int adb_button3_keycode;
/*
* XXX: need to figure out what ADB mouse packets mean ...
* This is the stuff stolen from the Atari driver ...
*/
static void adb_mouse_interrupt(unsigned char *buf, int nb)
{
int buttons, id;
char dx, dy;
/*
Handler 1 -- 100cpi original Apple mouse protocol.
Handler 2 -- 200cpi original Apple mouse protocol.
For Apple's standard one-button mouse protocol the data array will
contain the following values:
BITS COMMENTS
data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd.
data[1] = bxxx xxxx First button and x-axis motion.
data[2] = byyy yyyy Second button and y-axis motion.
Handler 4 -- Apple Extended mouse protocol.
For Apple's 3-button mouse protocol the data array will contain the
following values:
BITS COMMENTS
data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd.
data[1] = bxxx xxxx Left button and x-axis motion.
data[2] = byyy yyyy Second button and y-axis motion.
data[3] = byyy bxxx Third button and fourth button.
Y is additiona. high bits of y-axis motion.
X is additional high bits of x-axis motion.
'buttons' here means 'button down' states!
Button 1 (left) : bit 2, busmouse button 3
Button 2 (right) : bit 0, busmouse button 1
Button 3 (middle): bit 1, busmouse button 2
*/
/* x/y and buttons swapped */
id = (buf[0] >> 4) & 0xf;
buttons = adb_mouse_buttons[id];
/* button 1 (left, bit 2) */
buttons = (buttons & 3) | (buf[1] & 0x80 ? 4 : 0); /* 1+2 unchanged */
/* button 2 (middle) */
buttons = (buttons & 5) | (buf[2] & 0x80 ? 2 : 0); /* 2+3 unchanged */
/* button 3 (right) present?
* on a logitech mouseman, the right and mid buttons sometimes behave
* strangely until they both have been pressed after booting. */
/* data valid only if extended mouse format ! */
if (nb >= 4)
buttons = (buttons & 6) | (buf[3] & 0x80 ? 1 : 0); /* 1+3 unchanged */
adb_mouse_buttons[id] = buttons;
/* a button is down if it is down on any mouse */
for (id = 0; id < 16; ++id)
buttons &= adb_mouse_buttons[id];
dx = ((buf[2] & 0x7f) < 64 ? (buf[2] & 0x7f) : (buf[2] & 0x7f) - 128);
dy = ((buf[1] & 0x7f) < 64 ? (buf[1] & 0x7f) : (buf[1] & 0x7f) - 128);
busmouse_add_movementbuttons(msedev, dx, -dy, buttons);
if (console_loglevel >= 8)
printk(" %X %X %X dx %d dy %d \n",
buf[1], buf[2], buf[3], dx, dy);
}
static int release_mouse(struct inode *inode, struct file *file)
{
adb_mouse_interrupt_hook = NULL;
/*
* FIXME?: adb_mouse_interrupt_hook may still be executing
* on another CPU.
*/
return 0;
}
static int open_mouse(struct inode *inode, struct file *file)
{
adb_mouse_interrupt_hook = adb_mouse_interrupt;
return 0;
}
static struct busmouse adb_mouse =
{
ADB_MOUSE_MINOR, "adbmouse", THIS_MODULE, open_mouse, release_mouse, 7
};
static int __init adb_mouse_init(void)
{
#ifdef __powerpc__
if ((_machine != _MACH_chrp) && (_machine != _MACH_Pmac))
return -ENODEV;
#endif
#ifdef __mc68000__
if (!MACH_IS_MAC)
return -ENODEV;
#endif
/* all buttons up */
memset(adb_mouse_buttons, 7, sizeof(adb_mouse_buttons));
msedev = register_busmouse(&adb_mouse);
if (msedev < 0)
printk(KERN_WARNING "Unable to register ADB mouse driver.\n");
else
printk(KERN_INFO "Macintosh ADB mouse driver installed.\n");
return msedev < 0 ? msedev : 0;
}
#ifndef MODULE
/*
* XXX this function is misnamed.
* It is called if the kernel is booted with the adb_buttons=xxx
* option, which is about using ADB keyboard buttons to emulate
* mouse buttons. -- paulus
*/
static int __init adb_mouse_setup(char *str)
{
int ints[4];
str = get_options(str, ARRAY_SIZE(ints), ints);
if (ints[0] >= 1) {
adb_emulate_buttons = ints[1];
if (ints[0] >= 2)
adb_button2_keycode = ints[2];
if (ints[0] >= 3)
adb_button3_keycode = ints[3];
}
return 1;
}
__setup("adb_buttons=", adb_mouse_setup);
#endif /* !MODULE */
static void __exit adb_mouse_cleanup(void)
{
unregister_busmouse(msedev);
}
module_init(adb_mouse_init);
module_exit(adb_mouse_cleanup);
MODULE_LICENSE("GPL");
drivers/char/amigamouse.c deleted 100644 → 0
View file @ a49e82a5
/*
* Amiga Mouse Driver for Linux 68k by Michael Rausch
* based upon:
*
* Logitech Bus Mouse Driver for Linux
* by James Banks
*
* Mods by Matthew Dillon
* calls verify_area()
* tracks better when X is busy or paging
*
* Heavily modified by David Giller
* changed from queue- to counter- driven
* hacked out a (probably incorrect) mouse_poll
*
* Modified again by Nathan Laredo to interface with
* 0.96c-pl1 IRQ handling changes (13JUL92)
* didn't bother touching poll code.
*
* Modified the poll() code blindly to conform to the VFS
* requirements. 92.07.14 - Linus. Somebody should test it out.
*
* Modified by Johan Myreen to make room for other mice (9AUG92)
* removed assignment chr_fops[10] = &mouse_fops; see mouse.c
* renamed mouse_fops => bus_mouse_fops, made bus_mouse_fops public.
* renamed this file mouse.c => busmouse.c
*
* Modified for use in the 1.3 kernels by Jes Sorensen.
*
* Moved the isr-allocation to the mouse_{open,close} calls, as there
* is no reason to service the mouse in the vertical blank isr if
* the mouse is not in use. Jes Sorensen
*
* Converted to use new generic busmouse code. 5 Apr 1998
* Russell King <rmk@arm.uk.linux.org>
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
#include <linux/random.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/logibusmouse.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/irq.h>
#include <asm/amigahw.h>
#include <asm/amigaints.h>
#include "busmouse.h"
#if AMIGA_OLD_INT
#define AMI_MSE_INT_ON() mouseint_allowed = 1
#define AMI_MSE_INT_OFF() mouseint_allowed = 0
static int mouseint_allowed;
#endif
static int msedev;
static void mouse_interrupt(int irq, void *dummy, struct pt_regs *fp)
{
static int lastx=0, lasty=0;
int dx, dy;
int nx, ny;
unsigned char buttons;
unsigned short joy0dat, potgor;
#if AMIGA_OLD_INT
if(!mouseint_allowed)
return;
AMI_MSE_INT_OFF();
#endif
/*
* This routine assumes, just like Kickstart, that the mouse
* has not moved more than 127 ticks since last VBL.
*/
joy0dat = custom.joy0dat;
nx = joy0dat & 0xff;
ny = joy0dat >> 8;
dx = nx - lastx;
if (dx < - 127)
dx = (256 + nx) - lastx;
if (dx > 127)
dx = (nx - 256) - lastx;
dy = ny - lasty;
if (dy < - 127)
dy = (256 + ny) - lasty;
if (dy > 127)
dy = (ny - 256) - lasty;
lastx = nx;
lasty = ny;
#if 0
dx = -lastdx;
dx += (lastdx = joy0dat & 0xff);
if (dx < -127)
dx = -255-dx; /* underrun */
else
if (dx > 127)
dx = 255-dx; /* overflow */
dy = -lastdy;
dy += (lastdy = joy0dat >> 8);
if (dy < -127)
dy = -255-dy;
else
if (dy > 127)
dy = 255-dy;
#endif
potgor = custom.potgor;
buttons = (ciaa.pra & 0x40 ? 4 : 0) | /* left button; note that the bits are low-active, as are the expected results -> double negation */
#if 1
(potgor & 0x0100 ? 2 : 0) | /* middle button; emulation goes here */
#endif
(potgor & 0x0400 ? 1 : 0); /* right button */
busmouse_add_movementbuttons(msedev, dx, -dy, buttons);
#if AMIGA_OLD_INT
AMI_MSE_INT_ON();
#endif
}
/*
* close access to the mouse
*/
static int release_mouse(struct inode * inode, struct file * file)
{
free_irq(IRQ_AMIGA_VERTB, mouse_interrupt);
#if AMIGA_OLD_INT
AMI_MSE_INT_OFF();
#endif
return 0;
}
/*
* open access to the mouse, currently only one open is
* allowed.
*/
static int open_mouse(struct inode * inode, struct file * file)
{
/*
* use VBL to poll mouse deltas
*/
if(request_irq(IRQ_AMIGA_VERTB, mouse_interrupt, 0,
"Amiga mouse", mouse_interrupt)) {
printk(KERN_INFO "Installing Amiga mouse failed.\n");
return -EIO;
}
#if AMIGA_OLD_INT
AMI_MSE_INT_ON();
#endif
return 0;
}
static struct busmouse amigamouse = {
AMIGAMOUSE_MINOR, "amigamouse", THIS_MODULE, open_mouse, release_mouse, 7
};
static int __init amiga_mouse_init(void)
{
if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_MOUSE))
return -ENODEV;
if (!request_mem_region(CUSTOM_PHYSADDR+10, 2, "amigamouse [Denise]"))
return -EBUSY;
custom.joytest = 0; /* reset counters */
#if AMIGA_OLD_INT
AMI_MSE_INT_OFF();
#endif
msedev = register_busmouse(&amigamouse);
if (msedev < 0)
printk(KERN_WARNING "Unable to install Amiga mouse driver.\n");
else
printk(KERN_INFO "Amiga mouse installed.\n");
return msedev < 0 ? msedev : 0;
}
static void __exit amiga_mouse_exit(void)
{
unregister_busmouse(msedev);
release_mem_region(CUSTOM_PHYSADDR+10, 2);
}
module_init(amiga_mouse_init);
module_exit(amiga_mouse_exit);
MODULE_LICENSE("GPL");
drivers/char/atixlmouse.c deleted 100644 → 0
View file @ a49e82a5
/*
* ATI XL Bus Mouse Driver for Linux
* by Bob Harris (rth@sparta.com)
*
* Uses VFS interface for linux 0.98 (01OCT92)
*
* Modified by Chris Colohan (colohan@eecg.toronto.edu)
* Modularised 8-Sep-95 Philip Blundell <pjb27@cam.ac.uk>
*
* Converted to use new generic busmouse code. 5 Apr 1998
* Russell King <rmk@arm.uk.linux.org>
*
* version 0.3a
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
#include <linux/random.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/irq.h>
#include "busmouse.h"
#define ATIXL_MOUSE_IRQ 5 /* H/W interrupt # set up on ATIXL board */
#define ATIXL_BUSMOUSE 3 /* Minor device # (mknod c 10 3 /dev/bm) */
/* ATI XL Inport Busmouse Definitions */
#define ATIXL_MSE_DATA_PORT 0x23d
#define ATIXL_MSE_SIGNATURE_PORT 0x23e
#define ATIXL_MSE_CONTROL_PORT 0x23c
#define ATIXL_MSE_READ_BUTTONS 0x00
#define ATIXL_MSE_READ_X 0x01
#define ATIXL_MSE_READ_Y 0x02
/* Some nice ATI XL macros */
/* Select IR7, HOLD UPDATES (INT ENABLED), save X,Y */
#define ATIXL_MSE_DISABLE_UPDATE() { outb( 0x07, ATIXL_MSE_CONTROL_PORT ); \
outb( (0x20 | inb( ATIXL_MSE_DATA_PORT )), ATIXL_MSE_DATA_PORT ); }
/* Select IR7, Enable updates (INT ENABLED) */
#define ATIXL_MSE_ENABLE_UPDATE() { outb( 0x07, ATIXL_MSE_CONTROL_PORT ); \
outb( (0xdf & inb( ATIXL_MSE_DATA_PORT )), ATIXL_MSE_DATA_PORT ); }
/* Select IR7 - Mode Register, NO INTERRUPTS */
#define ATIXL_MSE_INT_OFF() { outb( 0x07, ATIXL_MSE_CONTROL_PORT ); \
outb( (0xe7 & inb( ATIXL_MSE_DATA_PORT )), ATIXL_MSE_DATA_PORT ); }
/* Select IR7 - Mode Register, DATA INTERRUPTS ENABLED */
#define ATIXL_MSE_INT_ON() { outb( 0x07, ATIXL_MSE_CONTROL_PORT ); \
outb( (0x08 | inb( ATIXL_MSE_DATA_PORT )), ATIXL_MSE_DATA_PORT ); }
/* Same general mouse structure */
static int msedev;
static void mouse_interrupt(int irq, void *dev_id, struct pt_regs * regs)
{
char dx, dy, buttons;
ATIXL_MSE_DISABLE_UPDATE(); /* Note that interrupts are still enabled */
outb(ATIXL_MSE_READ_X, ATIXL_MSE_CONTROL_PORT); /* Select IR1 - X movement */
dx = inb( ATIXL_MSE_DATA_PORT);
outb(ATIXL_MSE_READ_Y, ATIXL_MSE_CONTROL_PORT); /* Select IR2 - Y movement */
dy = inb( ATIXL_MSE_DATA_PORT);
outb(ATIXL_MSE_READ_BUTTONS, ATIXL_MSE_CONTROL_PORT); /* Select IR0 - Button Status */
buttons = inb( ATIXL_MSE_DATA_PORT);
busmouse_add_movementbuttons(msedev, dx, -dy, buttons);
ATIXL_MSE_ENABLE_UPDATE();
}
static int release_mouse(struct inode * inode, struct file * file)
{
ATIXL_MSE_INT_OFF(); /* Interrupts are really shut down here */
free_irq(ATIXL_MOUSE_IRQ, NULL);
return 0;
}
static int open_mouse(struct inode * inode, struct file * file)
{
if (request_irq(ATIXL_MOUSE_IRQ, mouse_interrupt, 0, "ATIXL mouse", NULL))
return -EBUSY;
ATIXL_MSE_INT_ON(); /* Interrupts are really enabled here */
return 0;
}
static struct busmouse atixlmouse = {
ATIXL_BUSMOUSE, "atixl", THIS_MODULE, open_mouse, release_mouse, 0
};
static int __init atixl_busmouse_init(void)
{
unsigned char a,b,c;
/*
* We must request the resource and claim it atomically
* nowdays. We can throw it away on error. Otherwise we
* may race another module load of the same I/O
*/
if (!request_region(ATIXL_MSE_DATA_PORT, 3, "atixlmouse"))
return -EIO;
a = inb( ATIXL_MSE_SIGNATURE_PORT ); /* Get signature */
b = inb( ATIXL_MSE_SIGNATURE_PORT );
c = inb( ATIXL_MSE_SIGNATURE_PORT );
if (( a != b ) && ( a == c ))
printk(KERN_INFO "\nATI Inport ");
else
{
release_region(ATIXL_MSE_DATA_PORT,3);
return -EIO;
}
outb(0x80, ATIXL_MSE_CONTROL_PORT); /* Reset the Inport device */
outb(0x07, ATIXL_MSE_CONTROL_PORT); /* Select Internal Register 7 */
outb(0x0a, ATIXL_MSE_DATA_PORT); /* Data Interrupts 8+, 1=30hz, 2=50hz, 3=100hz, 4=200hz rate */
msedev = register_busmouse(&atixlmouse);
if (msedev < 0)
{
printk("Bus mouse initialisation error.\n");
release_region(ATIXL_MSE_DATA_PORT,3); /* Was missing */
}
else
printk("Bus mouse detected and installed.\n");
return msedev < 0 ? msedev : 0;
}
static void __exit atixl_cleanup (void)
{
release_region(ATIXL_MSE_DATA_PORT, 3);
unregister_busmouse(msedev);
}
module_init(atixl_busmouse_init);
module_exit(atixl_cleanup);
MODULE_LICENSE("GPL");
drivers/char/logibusmouse.c deleted 100644 → 0
View file @ a49e82a5
/*
* Logitech Bus Mouse Driver for Linux
* by James Banks
*
* Mods by Matthew Dillon
* calls verify_area()
* tracks better when X is busy or paging
*
* Heavily modified by David Giller
* changed from queue- to counter- driven
* hacked out a (probably incorrect) mouse_select
*
* Modified again by Nathan Laredo to interface with
* 0.96c-pl1 IRQ handling changes (13JUL92)
* didn't bother touching select code.
*
* Modified the select() code blindly to conform to the VFS
* requirements. 92.07.14 - Linus. Somebody should test it out.
*
* Modified by Johan Myreen to make room for other mice (9AUG92)
* removed assignment chr_fops[10] = &mouse_fops; see mouse.c
* renamed mouse_fops => bus_mouse_fops, made bus_mouse_fops public.
* renamed this file mouse.c => busmouse.c
*
* Minor addition by Cliff Matthews
* added fasync support
*
* Modularised 6-Sep-95 Philip Blundell <pjb27@cam.ac.uk>
*
* Replaced dumb busy loop with udelay() 16 Nov 95
* Nathan Laredo <laredo@gnu.ai.mit.edu>
*
* Track I/O ports with request_region(). 12 Dec 95 Philip Blundell
*
* Converted to use new generic busmouse code. 5 Apr 1998
* Russell King <rmk@arm.uk.linux.org>
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/logibusmouse.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/poll.h>
#include <linux/miscdevice.h>
#include <linux/random.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/irq.h>
#include "busmouse.h"
static int msedev;
static int mouse_irq = MOUSE_IRQ;
MODULE_PARM(mouse_irq, "i");
#ifndef MODULE
static int __init bmouse_setup(char *str)
{
int ints[4];
str = get_options(str, ARRAY_SIZE(ints), ints);
if (ints[0] > 0)
mouse_irq=ints[1];
return 1;
}
__setup("logi_busmouse=", bmouse_setup);
#endif /* !MODULE */
static void mouse_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
char dx, dy;
unsigned char buttons;
outb(MSE_READ_X_LOW, MSE_CONTROL_PORT);
dx = (inb(MSE_DATA_PORT) & 0xf);
outb(MSE_READ_X_HIGH, MSE_CONTROL_PORT);
dx |= (inb(MSE_DATA_PORT) & 0xf) << 4;
outb(MSE_READ_Y_LOW, MSE_CONTROL_PORT );
dy = (inb(MSE_DATA_PORT) & 0xf);
outb(MSE_READ_Y_HIGH, MSE_CONTROL_PORT);
buttons = inb(MSE_DATA_PORT);
dy |= (buttons & 0xf) << 4;
buttons = ((buttons >> 5) & 0x07);
busmouse_add_movementbuttons(msedev, dx, -dy, buttons);
MSE_INT_ON();
}
/*
* close access to the mouse
*/
static int close_mouse(struct inode * inode, struct file * file)
{
MSE_INT_OFF();
free_irq(mouse_irq, NULL);
return 0;
}
/*
* open access to the mouse
*/
static int open_mouse(struct inode * inode, struct file * file)
{
if (request_irq(mouse_irq, mouse_interrupt, 0, "busmouse", NULL))
return -EBUSY;
MSE_INT_ON();
return 0;
}
static struct busmouse busmouse = {
LOGITECH_BUSMOUSE, "busmouse", THIS_MODULE, open_mouse, close_mouse, 7
};
static int __init logi_busmouse_init(void)
{
if (!request_region(LOGIBM_BASE, LOGIBM_EXTENT, "busmouse"))
return -EIO;
outb(MSE_CONFIG_BYTE, MSE_CONFIG_PORT);
outb(MSE_SIGNATURE_BYTE, MSE_SIGNATURE_PORT);
udelay(100L); /* wait for reply from mouse */
if (inb(MSE_SIGNATURE_PORT) != MSE_SIGNATURE_BYTE) {
release_region(LOGIBM_BASE, LOGIBM_EXTENT);
return -EIO;
}
outb(MSE_DEFAULT_MODE, MSE_CONFIG_PORT);
MSE_INT_OFF();
msedev = register_busmouse(&busmouse);
if (msedev < 0) {
release_region(LOGIBM_BASE, LOGIBM_EXTENT);
printk(KERN_WARNING "Unable to register busmouse driver.\n");
}
else
printk(KERN_INFO "Logitech busmouse installed.\n");
return msedev < 0 ? msedev : 0;
}
static void __exit logi_busmouse_cleanup (void)
{
unregister_busmouse(msedev);
release_region(LOGIBM_BASE, LOGIBM_EXTENT);
}
module_init(logi_busmouse_init);
module_exit(logi_busmouse_cleanup);
MODULE_LICENSE("GPL");
drivers/char/msbusmouse.c deleted 100644 → 0
View file @ a49e82a5
/*
* Microsoft busmouse driver based on Logitech driver (see busmouse.c)
*
* Microsoft BusMouse support by Teemu Rantanen (tvr@cs.hut.fi) (02AUG92)
*
* Microsoft Bus Mouse support modified by Derrick Cole (cole@concert.net)
* 8/28/92
*
* Microsoft Bus Mouse support folded into 0.97pl4 code
* by Peter Cervasio (pete%q106fm.uucp@wupost.wustl.edu) (08SEP92)
* Changes: Logitech and Microsoft support in the same kernel.
* Defined new constants in busmouse.h for MS mice.
* Added int mse_busmouse_type to distinguish busmouse types
* Added a couple of new functions to handle differences in using
* MS vs. Logitech (where the int variable wasn't appropriate).
*
* Modified by Peter Cervasio (address above) (26SEP92)
* Changes: Included code to (properly?) detect when a Microsoft mouse is
* really attached to the machine. Don't know what this does to
* Logitech bus mice, but all it does is read ports.
*
* Modified by Christoph Niemann (niemann@rubdv15.etdv.ruhr-uni-bochum.de)
* Changes: Better interrupt-handler (like in busmouse.c).
* Some changes to reduce code-size.
* Changed detection code to use inb_p() instead of doing empty
* loops to delay i/o.
*
* Modularised 8-Sep-95 Philip Blundell <pjb27@cam.ac.uk>
*
* Converted to use new generic busmouse code. 5 Apr 1998
* Russell King <rmk@arm.uk.linux.org>
*
* version 0.3b
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/logibusmouse.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
#include <linux/random.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/irq.h>
#include "busmouse.h"
static int msedev;
static int mouse_irq = MOUSE_IRQ;
MODULE_PARM(mouse_irq, "i");
#ifndef MODULE
static int __init msmouse_setup(char *str)
{
int ints[4];
str = get_options(str, ARRAY_SIZE(ints), ints);
if (ints[0] > 0)
mouse_irq=ints[1];
return 1;
}
__setup("msmouse=",msmouse_setup);
#endif /* !MODULE */
static void ms_mouse_interrupt(int irq, void *dev_id, struct pt_regs * regs)
{
char dx, dy;
unsigned char buttons;
outb(MS_MSE_COMMAND_MODE, MS_MSE_CONTROL_PORT);
outb((inb(MS_MSE_DATA_PORT) | 0x20), MS_MSE_DATA_PORT);
outb(MS_MSE_READ_X, MS_MSE_CONTROL_PORT);
dx = inb(MS_MSE_DATA_PORT);
outb(MS_MSE_READ_Y, MS_MSE_CONTROL_PORT);
dy = inb(MS_MSE_DATA_PORT);
outb(MS_MSE_READ_BUTTONS, MS_MSE_CONTROL_PORT);
buttons = ~(inb(MS_MSE_DATA_PORT)) & 0x07;
outb(MS_MSE_COMMAND_MODE, MS_MSE_CONTROL_PORT);
outb((inb(MS_MSE_DATA_PORT) & 0xdf), MS_MSE_DATA_PORT);
/* why did the original have:
* if (dx != 0 || dy != 0 || buttons != mouse.buttons ||
* ((~buttons) & 0x07))
* ^^^^^^^^^^^^^^^^^^^ this?
*/
busmouse_add_movementbuttons(msedev, dx, -dy, buttons);
}
static int release_mouse(struct inode * inode, struct file * file)
{
MS_MSE_INT_OFF();
free_irq(mouse_irq, NULL);
return 0;
}
static int open_mouse(struct inode * inode, struct file * file)
{
if (request_irq(mouse_irq, ms_mouse_interrupt, 0, "MS Busmouse", NULL))
return -EBUSY;
outb(MS_MSE_START, MS_MSE_CONTROL_PORT);
MS_MSE_INT_ON();
return 0;
}
static struct busmouse msbusmouse = {
MICROSOFT_BUSMOUSE, "msbusmouse", THIS_MODULE, open_mouse, release_mouse, 0
};
static int __init ms_bus_mouse_init(void)
{
int present = 0;
int mse_byte, i;
if (check_region(MS_MSE_CONTROL_PORT, 0x04))
return -ENODEV;
if (inb_p(MS_MSE_SIGNATURE_PORT) == 0xde) {
mse_byte = inb_p(MS_MSE_SIGNATURE_PORT);
for (i = 0; i < 4; i++) {
if (inb_p(MS_MSE_SIGNATURE_PORT) == 0xde) {
if (inb_p(MS_MSE_SIGNATURE_PORT) == mse_byte)
present = 1;
else
present = 0;
} else
present = 0;
}
}
if (present == 0)
return -EIO;
if (!request_region(MS_MSE_CONTROL_PORT, 0x04, "MS Busmouse"))
return -EIO;
MS_MSE_INT_OFF();
msedev = register_busmouse(&msbusmouse);
if (msedev < 0) {
printk(KERN_WARNING "Unable to register msbusmouse driver.\n");
release_region(MS_MSE_CONTROL_PORT, 0x04);
}
else
printk(KERN_INFO "Microsoft BusMouse detected and installed.\n");
return msedev < 0 ? msedev : 0;
}
static void __exit ms_bus_mouse_exit(void)
{
unregister_busmouse(msedev);
release_region(MS_MSE_CONTROL_PORT, 0x04);
}
module_init(ms_bus_mouse_init)
module_exit(ms_bus_mouse_exit)
MODULE_LICENSE("GPL");
drivers/char/pc110pad.c deleted 100644 → 0
View file @ a49e82a5
This diff is collapsed.
drivers/char/pc110pad.h deleted 100644 → 0
View file @ a49e82a5
#ifndef _PC110PAD_H
#define _PC110PAD_H
#include <linux/ioctl.h>
enum pc110pad_mode {
PC110PAD_RAW, /* bytes as they come out of the hardware */
PC110PAD_RARE, /* debounced up/down and absolute x,y */
PC110PAD_DEBUG, /* up/down, debounced, transitions, button */
PC110PAD_PS2, /* ps2 relative (default) */
};
struct pc110pad_params {
enum pc110pad_mode mode;
int bounce_interval;
int tap_interval;
int irq;
int io;
};
#define MS *HZ/1000
/* Appears as device major=10 (MISC), minor=PC110_PAD */
#define PC110PAD_IOCTL_TYPE 0x9a
#define PC110PADIOCGETP _IOR(PC110PAD_IOCTL_TYPE, 0, struct pc110pad_params)
#define PC110PADIOCSETP _IOW(PC110PAD_IOCTL_TYPE, 1, struct pc110pad_params)
#endif /* _PC110PAD_H */
drivers/char/qpmouse.c deleted 100644 → 0
View file @ a49e82a5
/*
* linux/drivers/char/qpmouse.c
*
* Driver for a 82C710 C&T mouse interface chip.
*
* Based on the PS/2 driver by Johan Myreen.
*
* Corrections in device setup for some laptop mice & trackballs.
* 02Feb93 (troyer@saifr00.cfsat.Honeywell.COM,mch@wimsey.bc.ca)
*
* Modified by Johan Myreen (jem@iki.fi) 04Aug93
* to include support for QuickPort mouse.
*
* Changed references to "QuickPort" with "82C710" since "QuickPort"
* is not what this driver is all about -- QuickPort is just a
* connector type, and this driver is for the mouse port on the Chips
* & Technologies 82C710 interface chip. 15Nov93 jem@iki.fi
*
* Added support for SIGIO. 28Jul95 jem@iki.fi
*
* Rearranged SIGIO support to use code from tty_io. 9Sept95 ctm@ardi.com
*
* Modularised 8-Sep-95 Philip Blundell <pjb27@cam.ac.uk>
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/fcntl.h>
#include <linux/errno.h>
#include <linux/timer.h>
#include <linux/slab.h>
#include <linux/miscdevice.h>
#include <linux/random.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/smp_lock.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/semaphore.h>
#include <linux/pc_keyb.h> /* mouse enable command.. */
/*
* We use the same minor number as the PS/2 mouse for (bad) historical
* reasons..
*/
#define PSMOUSE_MINOR 1 /* Minor device # for this mouse */
#define QP_BUF_SIZE 2048
struct qp_queue {
unsigned long head;
unsigned long tail;
wait_queue_head_t proc_list;
struct fasync_struct *fasync;
unsigned char buf[QP_BUF_SIZE];
};
static struct qp_queue *queue;
static unsigned int get_from_queue(void)
{
unsigned int result;
unsigned long flags;
save_flags(flags);
cli();
result = queue->buf[queue->tail];
queue->tail = (queue->tail + 1) & (QP_BUF_SIZE-1);
restore_flags(flags);
return result;
}
static inline int queue_empty(void)
{
return queue->head == queue->tail;
}
static int fasync_qp(int fd, struct file *filp, int on)
{
int retval;
retval = fasync_helper(fd, filp, on, &queue->fasync);
if (retval < 0)
return retval;
return 0;
}
/*
* 82C710 Interface
*/
#define QP_DATA 0x310 /* Data Port I/O Address */
#define QP_STATUS 0x311 /* Status Port I/O Address */
#define QP_DEV_IDLE 0x01 /* Device Idle */
#define QP_RX_FULL 0x02 /* Device Char received */
#define QP_TX_IDLE 0x04 /* Device XMIT Idle */
#define QP_RESET 0x08 /* Device Reset */
#define QP_INTS_ON 0x10 /* Device Interrupt On */
#define QP_ERROR_FLAG 0x20 /* Device Error */
#define QP_CLEAR 0x40 /* Device Clear */
#define QP_ENABLE 0x80 /* Device Enable */
#define QP_IRQ 12
static int qp_present;
static int qp_count;
static spinlock_t qp_count_lock = SPIN_LOCK_UNLOCKED;
static int qp_data = QP_DATA;
static int qp_status = QP_STATUS;
static int poll_qp_status(void);
static int probe_qp(void);
/*
* Interrupt handler for the 82C710 mouse port. A character
* is waiting in the 82C710.
*/
static void qp_interrupt(int cpl, void *dev_id, struct pt_regs * regs)
{
int head = queue->head;
int maxhead = (queue->tail-1) & (QP_BUF_SIZE-1);
add_mouse_randomness(queue->buf[head] = inb(qp_data));
if (head != maxhead) {
head++;
head &= QP_BUF_SIZE-1;
}
queue->head = head;
kill_fasync(&queue->fasync, SIGIO, POLL_IN);
wake_up_interruptible(&queue->proc_list);
}
static int release_qp(struct inode * inode, struct file * file)
{
unsigned char status;
fasync_qp(-1, file, 0);
spin_lock( &qp_count_lock );
if (!--qp_count) {
if (!poll_qp_status())
printk(KERN_WARNING "Warning: Mouse device busy in release_qp()\n");
status = inb_p(qp_status);
outb_p(status & ~(QP_ENABLE|QP_INTS_ON), qp_status);
if (!poll_qp_status())
printk(KERN_WARNING "Warning: Mouse device busy in release_qp()\n");
free_irq(QP_IRQ, NULL);
}
spin_unlock( &qp_count_lock );
return 0;
}
/*
* Install interrupt handler.
* Enable the device, enable interrupts.
*/
static int open_qp(struct inode * inode, struct file * file)
{
unsigned char status;
if (!qp_present)
return -EINVAL;
spin_lock( &qp_count_lock );
if (qp_count++)
{
spin_unlock( &qp_count_lock );
return 0;
}
spin_unlock( &qp_count_lock );
if (request_irq(QP_IRQ, qp_interrupt, 0, "PS/2 Mouse", NULL)) {
qp_count--;
return -EBUSY;
}
status = inb_p(qp_status);
status |= (QP_ENABLE|QP_RESET);
outb_p(status, qp_status);
status &= ~(QP_RESET);
outb_p(status, qp_status);
queue->head = queue->tail = 0; /* Flush input queue */
status |= QP_INTS_ON;
outb_p(status, qp_status); /* Enable interrupts */
while (!poll_qp_status()) {
printk(KERN_ERR "Error: Mouse device busy in open_qp()\n");
qp_count--;
status &= ~(QP_ENABLE|QP_INTS_ON);
outb_p(status, qp_status);
free_irq(QP_IRQ, NULL);
return -EBUSY;
}
outb_p(AUX_ENABLE_DEV, qp_data); /* Wake up mouse */
return 0;
}
/*
* Write to the 82C710 mouse device.
*/
static ssize_t write_qp(struct file * file, const char * buffer,
size_t count, loff_t *ppos)
{
ssize_t i = count;
while (i--) {
char c;
if (!poll_qp_status())
return -EIO;
get_user(c, buffer++);
outb_p(c, qp_data);
}
file->f_dentry->d_inode->i_mtime = CURRENT_TIME;
return count;
}
static unsigned int poll_qp(struct file *file, poll_table * wait)
{
poll_wait(file, &queue->proc_list, wait);
if (!queue_empty())
return POLLIN | POLLRDNORM;
return 0;
}
/*
* Wait for device to send output char and flush any input char.
*/
#define MAX_RETRIES (60)
static int poll_qp_status(void)
{
int retries=0;
while ((inb(qp_status)&(QP_RX_FULL|QP_TX_IDLE|QP_DEV_IDLE))
!= (QP_DEV_IDLE|QP_TX_IDLE)
&& retries < MAX_RETRIES) {
if (inb_p(qp_status)&(QP_RX_FULL))
inb_p(qp_data);
current->state = TASK_INTERRUPTIBLE;
schedule_timeout((5*HZ + 99) / 100);
retries++;
}
return !(retries==MAX_RETRIES);
}
/*
* Put bytes from input queue to buffer.
*/
static ssize_t read_qp(struct file * file, char * buffer,
size_t count, loff_t *ppos)
{
DECLARE_WAITQUEUE(wait, current);
ssize_t i = count;
unsigned char c;
if (queue_empty()) {
if (file->f_flags & O_NONBLOCK)
return -EAGAIN;
add_wait_queue(&queue->proc_list, &wait);
repeat:
set_current_state(TASK_INTERRUPTIBLE);
if (queue_empty() && !signal_pending(current)) {
schedule();
goto repeat;
}
current->state = TASK_RUNNING;
remove_wait_queue(&queue->proc_list, &wait);
}
while (i > 0 && !queue_empty()) {
c = get_from_queue();
put_user(c, buffer++);
i--;
}
if (count-i) {
file->f_dentry->d_inode->i_atime = CURRENT_TIME;
return count-i;
}
if (signal_pending(current))
return -ERESTARTSYS;
return 0;
}
struct file_operations qp_fops = {
owner: THIS_MODULE,
read: read_qp,
write: write_qp,
poll: poll_qp,
open: open_qp,
release: release_qp,
fasync: fasync_qp,
};
/*
* Initialize driver.
*/
static struct miscdevice qp_mouse = {
minor: PSMOUSE_MINOR,
name: "QPmouse",
fops: &qp_fops,
};
/*
* Function to read register in 82C710.
*/
static inline unsigned char read_710(unsigned char index)
{
outb_p(index, 0x390); /* Write index */
return inb_p(0x391); /* Read the data */
}
/*
* See if we can find a 82C710 device. Read mouse address.
*/
static int __init probe_qp(void)
{
outb_p(0x55, 0x2fa); /* Any value except 9, ff or 36 */
outb_p(0xaa, 0x3fa); /* Inverse of 55 */
outb_p(0x36, 0x3fa); /* Address the chip */
outb_p(0xe4, 0x3fa); /* 390/4; 390 = config address */
outb_p(0x1b, 0x2fa); /* Inverse of e4 */
if (read_710(0x0f) != 0xe4) /* Config address found? */
return 0; /* No: no 82C710 here */
qp_data = read_710(0x0d)*4; /* Get mouse I/O address */
qp_status = qp_data+1;
outb_p(0x0f, 0x390);
outb_p(0x0f, 0x391); /* Close config mode */
return 1;
}
static char msg_banner[] __initdata = KERN_INFO "82C710 type pointing device detected -- driver installed.\n";
static char msg_nomem[] __initdata = KERN_ERR "qpmouse: no queue memory.\n";
static int __init qpmouse_init_driver(void)
{
if (!probe_qp())
return -EIO;
printk(msg_banner);
/* printk("82C710 address = %x (should be 0x310)\n", qp_data); */
queue = (struct qp_queue *) kmalloc(sizeof(*queue), GFP_KERNEL);
if (queue == NULL) {
printk(msg_nomem);
return -ENOMEM;
}
qp_present = 1;
misc_register(&qp_mouse);
memset(queue, 0, sizeof(*queue));
queue->head = queue->tail = 0;
init_waitqueue_head(&queue->proc_list);
return 0;
}
static void __exit qpmouse_exit_driver(void)
{
misc_deregister(&qp_mouse);
kfree(queue);
}
module_init(qpmouse_init_driver);
module_exit(qpmouse_exit_driver);
MODULE_LICENSE("GPL");
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7