serial: remove unnecessary platform_set_drvdata()

The driver core clears the driver data to NULL after device_release
or on probe failure, since commit 0998d063
(device-core: Ensure drvdata = NULL when no driver is bound).
Thus, it is not needed to manually clear the device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Barry Song <baohua.song@csr.com>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/ar933x_uart.c

@@ -703,7 +703,6 @@ static int ar933x_uart_remove(struct platform_device *pdev)
 	struct ar933x_uart_port *up;
 
 	up = platform_get_drvdata(pdev);
-	platform_set_drvdata(pdev, NULL);
 
 	if (up) {
 		uart_remove_one_port(&ar933x_uart_driver, &up->port);

drivers/tty/serial/atmel_serial.c

@@ -1860,7 +1860,6 @@ static int atmel_serial_remove(struct platform_device *pdev)
 	int ret = 0;
 
 	device_init_wakeup(&pdev->dev, 0);
-	platform_set_drvdata(pdev, NULL);
 
 	ret = uart_remove_one_port(&atmel_uart, port);
 

drivers/tty/serial/bcm63xx_uart.c

@@ -852,7 +852,6 @@ static int bcm_uart_remove(struct platform_device *pdev)
 
 	port = platform_get_drvdata(pdev);
 	uart_remove_one_port(&bcm_uart_driver, port);
-	platform_set_drvdata(pdev, NULL);
 	/* mark port as free */
 	ports[pdev->id].membase = 0;
 	return 0;

drivers/tty/serial/clps711x.c

@@ -438,8 +438,7 @@ static int uart_clps711x_probe(struct platform_device *pdev)
 	s->uart_clk = devm_clk_get(&pdev->dev, "uart");
 	if (IS_ERR(s->uart_clk)) {
 		dev_err(&pdev->dev, "Can't get UART clocks\n");
-		ret = PTR_ERR(s->uart_clk);
-		goto err_out;
+		return PTR_ERR(s->uart_clk);
 	}
 
 	s->uart.owner		= THIS_MODULE;
@@ -461,7 +460,7 @@ static int uart_clps711x_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "Registering UART driver failed\n");
 		devm_clk_put(&pdev->dev, s->uart_clk);
-		goto err_out;
+		return ret;
 	}
 
 	for (i = 0; i < UART_CLPS711X_NR; i++) {
@@ -478,11 +477,6 @@ static int uart_clps711x_probe(struct platform_device *pdev)
 	}
 
 	return 0;
-
-err_out:
-	platform_set_drvdata(pdev, NULL);
-
-	return ret;
 }
 
 static int uart_clps711x_remove(struct platform_device *pdev)
@@ -495,7 +489,6 @@ static int uart_clps711x_remove(struct platform_device *pdev)
 
 	devm_clk_put(&pdev->dev, s->uart_clk);
 	uart_unregister_driver(&s->uart);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }

drivers/tty/serial/efm32-uart.c

@@ -778,8 +778,6 @@ static int efm32_uart_remove(struct platform_device *pdev)
 {
 	struct efm32_uart_port *efm_port = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
-
 	uart_remove_one_port(&efm32_uart_reg, &efm_port->port);
 
 	if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(efm32_uart_ports))

drivers/tty/serial/imx.c

@@ -1596,8 +1596,6 @@ static int serial_imx_remove(struct platform_device *pdev)
 
 	pdata = pdev->dev.platform_data;
 
-	platform_set_drvdata(pdev, NULL);
-
 	uart_remove_one_port(&imx_reg, &sport->port);
 
 	if (pdata && pdata->exit)

drivers/tty/serial/netx-serial.c

@@ -693,8 +693,6 @@ static int serial_netx_remove(struct platform_device *pdev)
 {
 	struct netx_port *sport = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
-
 	if (sport)
 		uart_remove_one_port(&netx_reg, &sport->port);
 

drivers/tty/serial/pmac_zilog.c

@@ -1798,7 +1798,6 @@ static int __exit pmz_detach(struct platform_device *pdev)
 
 	uart_remove_one_port(&pmz_uart_reg, &uap->port);
 
-	platform_set_drvdata(pdev, NULL);
 	uap->port.dev = NULL;
 
 	return 0;

drivers/tty/serial/pnx8xxx_uart.c

@@ -801,8 +801,6 @@ static int pnx8xxx_serial_remove(struct platform_device *pdev)
 {
 	struct pnx8xxx_port *sport = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
-
 	if (sport)
 		uart_remove_one_port(&pnx8xxx_reg, &sport->port);
 

drivers/tty/serial/pxa.c

@@ -945,8 +945,6 @@ static int serial_pxa_remove(struct platform_device *dev)
 {
 	struct uart_pxa_port *sport = platform_get_drvdata(dev);
 
-	platform_set_drvdata(dev, NULL);
-
 	uart_remove_one_port(&serial_pxa_reg, &sport->port);
 
 	clk_unprepare(sport->clk);

drivers/tty/serial/sa1100.c

@@ -864,8 +864,6 @@ static int sa1100_serial_remove(struct platform_device *pdev)
 {
 	struct sa1100_port *sport = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
-
 	if (sport)
 		uart_remove_one_port(&sa1100_reg, &sport->port);
 

drivers/tty/serial/sccnxp.c

@@ -997,8 +997,6 @@ static int sccnxp_probe(struct platform_device *pdev)
 	}
 
 err_out:
-	platform_set_drvdata(pdev, NULL);
-
 	return ret;
 }
 
@@ -1016,7 +1014,6 @@ static int sccnxp_remove(struct platform_device *pdev)
 		uart_remove_one_port(&s->uart, &s->port[i]);
 
 	uart_unregister_driver(&s->uart);
-	platform_set_drvdata(pdev, NULL);
 
 	if (!IS_ERR(s->regulator))
 		return regulator_disable(s->regulator);

drivers/tty/serial/sirfsoc_uart.c

@@ -717,7 +717,6 @@ int sirfsoc_uart_probe(struct platform_device *pdev)
 	clk_disable_unprepare(sirfport->clk);
 	clk_put(sirfport->clk);
 clk_err:
-	platform_set_drvdata(pdev, NULL);
 	if (sirfport->hw_flow_ctrl)
 		pinctrl_put(sirfport->p);
 err:
@@ -728,7 +727,7 @@ static int sirfsoc_uart_remove(struct platform_device *pdev)
 {
 	struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev);
 	struct uart_port *port = &sirfport->port;
-	platform_set_drvdata(pdev, NULL);
+
 	if (sirfport->hw_flow_ctrl)
 		pinctrl_put(sirfport->p);
 	clk_disable_unprepare(sirfport->clk);

drivers/tty/serial/vt8500_serial.c

@@ -630,7 +630,6 @@ static int vt8500_serial_remove(struct platform_device *pdev)
 {
 	struct vt8500_port *vt8500_port = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
 	clk_disable_unprepare(vt8500_port->clk);
 	uart_remove_one_port(&vt8500_uart_driver, &vt8500_port->uart);