Commit 4451c287 authored by Christoph Fritz's avatar Christoph Fritz Committed by Thierry Reding

drm/panel: Add support for AUO G104SN02 V2 panel

This patch adds support for AUO G104SN02 V2 800x600 10.4" panel to DRM
simple panel driver.
Signed-off-by: default avatarChristoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: default avatarStefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1513430016.1930.4.camel@googlemail.com
parent 7ff9288c
AU Optronics Corporation 10.4" (800x600) color TFT LCD panel
Required properties:
- compatible: should be "auo,g104sn02"
- power-supply: as specified in the base binding
Optional properties:
- backlight: as specified in the base binding
- enable-gpios: as specified in the base binding
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.
......@@ -581,6 +581,29 @@ static const struct panel_desc auo_b133htn01 = {
},
};
static const struct drm_display_mode auo_g104sn02_mode = {
.clock = 40000,
.hdisplay = 800,
.hsync_start = 800 + 40,
.hsync_end = 800 + 40 + 216,
.htotal = 800 + 40 + 216 + 128,
.vdisplay = 600,
.vsync_start = 600 + 10,
.vsync_end = 600 + 10 + 35,
.vtotal = 600 + 10 + 35 + 2,
.vrefresh = 60,
};
static const struct panel_desc auo_g104sn02 = {
.modes = &auo_g104sn02_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 211,
.height = 158,
},
};
static const struct display_timing auo_g133han01_timings = {
.pixelclock = { 134000000, 141200000, 149000000 },
.hactive = { 1920, 1920, 1920 },
......@@ -2071,6 +2094,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "auo,b133xtn01",
.data = &auo_b133xtn01,
}, {
.compatible = "auo,g104sn02",
.data = &auo_g104sn02,
}, {
.compatible = "auo,g133han01",
.data = &auo_g133han01,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment