Merge branch 'for_linus' of...

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  platform/x86: move rfkill for Dell Mini 1012 to compal-laptop
  thinkpad-acpi: Add KEY_CAMERA (Fn-F6) for Lenovo keyboards
  thinkpad-acpi: add support for model-specific keymaps
  thinkpad-acpi: lock down size of hotkey keymap
  thinkpad-acpi: untangle ACPI/vendor backlight selection
  thinkpad-acpi: find ACPI video device by synthetic HID
  intel_ips: potential null dereference
  drivers/platform/x86: Adjust confusing if indentation
  x86: intel_ips: do not use PCI resources before pci_enable_device()

Documentation/laptops/thinkpad-acpi.txt

@@ -1024,6 +1024,10 @@ ThinkPad-specific interface.  The driver will disable its native
 backlight brightness control interface if it detects that the standard
 ACPI interface is available in the ThinkPad.
 
+If you want to use the thinkpad-acpi backlight brightness control
+instead of the generic ACPI video backlight brightness control for some
+reason, you should use the acpi_backlight=vendor kernel parameter.
+
 The brightness_enable module parameter can be used to control whether
 the LCD brightness control feature will be enabled when available.
 brightness_enable=0 forces it to be disabled.  brightness_enable=1

drivers/platform/x86/asus_acpi.c

@@ -938,10 +938,11 @@ static int set_brightness(int value)
 	/* SPLV laptop */
 	if (hotk->methods->brightness_set) {
 		if (!write_acpi_int(hotk->handle, hotk->methods->brightness_set,
-				    value, NULL))
+				    value, NULL)) {
 			printk(KERN_WARNING
 			       "Asus ACPI: Error changing brightness\n");
 			ret = -EIO;
+		}
 		goto out;
 	}
 
@@ -953,10 +954,11 @@ static int set_brightness(int value)
 					      hotk->methods->brightness_down,
 					      NULL, NULL);
 		(value > 0) ? value-- : value++;
-		if (ACPI_FAILURE(status))
+		if (ACPI_FAILURE(status)) {
 			printk(KERN_WARNING
 			       "Asus ACPI: Error changing brightness\n");
 			ret = -EIO;
+		}
 	}
 out:
 	return ret;

drivers/platform/x86/compal-laptop.c

@@ -840,6 +840,14 @@ static struct dmi_system_id __initdata compal_dmi_table[] = {
 		},
 		.callback = dmi_check_cb
 	},
+	{
+		.ident = "Dell Mini 1012",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"),
+		},
+		.callback = dmi_check_cb
+	},
 	{
 		.ident = "Dell Inspiron 11z",
 		.matches = {
@@ -1092,5 +1100,6 @@ MODULE_ALIAS("dmi:*:rnJHL90:rvrREFERENCE:*");
 MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron910:*");
 MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1010:*");
 MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1011:*");
+MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1012:*");
 MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1110:*");
 MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1210:*");

drivers/platform/x86/dell-laptop.c

@@ -121,6 +121,13 @@ static struct dmi_system_id __devinitdata dell_blacklist[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1011"),
 		},
 	},
+	{
+		.ident = "Dell Mini 1012",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"),
+		},
+	},
 	{
 		.ident = "Dell Inspiron 11z",
 		.matches = {

drivers/platform/x86/intel_ips.c

@@ -1342,8 +1342,10 @@ static struct ips_mcp_limits *ips_detect_cpu(struct ips_driver *ips)
 		limits = &ips_lv_limits;
 	else if (strstr(boot_cpu_data.x86_model_id, "CPU       U"))
 		limits = &ips_ulv_limits;
-	else
+	else {
 		dev_info(&ips->dev->dev, "No CPUID match found.\n");
+		goto out;
+	}
 
 	rdmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_power);
 	tdp = turbo_power & TURBO_TDP_MASK;
@@ -1432,6 +1434,12 @@ static int ips_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	spin_lock_init(&ips->turbo_status_lock);
 
+	ret = pci_enable_device(dev);
+	if (ret) {
+		dev_err(&dev->dev, "can't enable PCI device, aborting\n");
+		goto error_free;
+	}
+
 	if (!pci_resource_start(dev, 0)) {
 		dev_err(&dev->dev, "TBAR not assigned, aborting\n");
 		ret = -ENXIO;
@@ -1444,11 +1452,6 @@ static int ips_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		goto error_free;
 	}
 
-	ret = pci_enable_device(dev);
-	if (ret) {
-		dev_err(&dev->dev, "can't enable PCI device, aborting\n");
-		goto error_free;
-	}
 
 	ips->regmap = ioremap(pci_resource_start(dev, 0),
 			      pci_resource_len(dev, 0));

drivers/platform/x86/thinkpad_acpi.c

@@ -1911,6 +1911,17 @@ enum {	/* hot key scan codes (derived from ACPI DSDT) */
 	TP_ACPI_HOTKEYSCAN_VOLUMEDOWN,
 	TP_ACPI_HOTKEYSCAN_MUTE,
 	TP_ACPI_HOTKEYSCAN_THINKPAD,
+	TP_ACPI_HOTKEYSCAN_UNK1,
+	TP_ACPI_HOTKEYSCAN_UNK2,
+	TP_ACPI_HOTKEYSCAN_UNK3,
+	TP_ACPI_HOTKEYSCAN_UNK4,
+	TP_ACPI_HOTKEYSCAN_UNK5,
+	TP_ACPI_HOTKEYSCAN_UNK6,
+	TP_ACPI_HOTKEYSCAN_UNK7,
+	TP_ACPI_HOTKEYSCAN_UNK8,
+
+	/* Hotkey keymap size */
+	TPACPI_HOTKEY_MAP_LEN
 };
 
 enum {	/* Keys/events available through NVRAM polling */
@@ -3082,6 +3093,8 @@ static const struct tpacpi_quirk tpacpi_hotkey_qtable[] __initconst = {
 	TPACPI_Q_IBM('1', 'D', TPACPI_HK_Q_INIMASK), /* X22, X23, X24 */
 };
 
+typedef u16 tpacpi_keymap_t[TPACPI_HOTKEY_MAP_LEN];
+
 static int __init hotkey_init(struct ibm_init_struct *iibm)
 {
 	/* Requirements for changing the default keymaps:
@@ -3113,9 +3126,17 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 	 * If the above is too much to ask, don't change the keymap.
 	 * Ask the thinkpad-acpi maintainer to do it, instead.
 	 */
-	static u16 ibm_keycode_map[] __initdata = {
+
+	enum keymap_index {
+		TPACPI_KEYMAP_IBM_GENERIC = 0,
+		TPACPI_KEYMAP_LENOVO_GENERIC,
+	};
+
+	static const tpacpi_keymap_t tpacpi_keymaps[] __initconst = {
+	/* Generic keymap for IBM ThinkPads */
+	[TPACPI_KEYMAP_IBM_GENERIC] = {
 		/* Scan Codes 0x00 to 0x0B: ACPI HKEY FN+F1..F12 */
-		KEY_FN_F1,	KEY_FN_F2,	KEY_COFFEE,	KEY_SLEEP,
+		KEY_FN_F1,	KEY_BATTERY,	KEY_COFFEE,	KEY_SLEEP,
 		KEY_WLAN,	KEY_FN_F6, KEY_SWITCHVIDEOMODE, KEY_FN_F8,
 		KEY_FN_F9,	KEY_FN_F10,	KEY_FN_F11,	KEY_SUSPEND,
 
@@ -3146,11 +3167,13 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 		/* (assignments unknown, please report if found) */
 		KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
 		KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
-	};
-	static u16 lenovo_keycode_map[] __initdata = {
+		},
+
+	/* Generic keymap for Lenovo ThinkPads */
+	[TPACPI_KEYMAP_LENOVO_GENERIC] = {
 		/* Scan Codes 0x00 to 0x0B: ACPI HKEY FN+F1..F12 */
 		KEY_FN_F1,	KEY_COFFEE,	KEY_BATTERY,	KEY_SLEEP,
-		KEY_WLAN,	KEY_FN_F6, KEY_SWITCHVIDEOMODE, KEY_FN_F8,
+		KEY_WLAN,	KEY_CAMERA, KEY_SWITCHVIDEOMODE, KEY_FN_F8,
 		KEY_FN_F9,	KEY_FN_F10,	KEY_FN_F11,	KEY_SUSPEND,
 
 		/* Scan codes 0x0C to 0x1F: Other ACPI HKEY hot keys */
@@ -3189,11 +3212,25 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 		/* (assignments unknown, please report if found) */
 		KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
 		KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN, KEY_UNKNOWN,
+		},
+	};
+
+	static const struct tpacpi_quirk tpacpi_keymap_qtable[] __initconst = {
+		/* Generic maps (fallback) */
+		{
+		  .vendor = PCI_VENDOR_ID_IBM,
+		  .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY,
+		  .quirks = TPACPI_KEYMAP_IBM_GENERIC,
+		},
+		{
+		  .vendor = PCI_VENDOR_ID_LENOVO,
+		  .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY,
+		  .quirks = TPACPI_KEYMAP_LENOVO_GENERIC,
+		},
 	};
 
-#define TPACPI_HOTKEY_MAP_LEN		ARRAY_SIZE(ibm_keycode_map)
-#define TPACPI_HOTKEY_MAP_SIZE		sizeof(ibm_keycode_map)
-#define TPACPI_HOTKEY_MAP_TYPESIZE	sizeof(ibm_keycode_map[0])
+#define TPACPI_HOTKEY_MAP_SIZE		sizeof(tpacpi_keymap_t)
+#define TPACPI_HOTKEY_MAP_TYPESIZE	sizeof(tpacpi_keymap_t[0])
 
 	int res, i;
 	int status;
@@ -3202,6 +3239,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 	bool tabletsw_state = false;
 
 	unsigned long quirks;
+	unsigned long keymap_id;
 
 	vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
 			"initializing hotkey subdriver\n");
@@ -3342,7 +3380,6 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 		goto err_exit;
 
 	/* Set up key map */
-
 	hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE,
 					GFP_KERNEL);
 	if (!hotkey_keycode_map) {
@@ -3352,17 +3389,14 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 		goto err_exit;
 	}
 
-	if (tpacpi_is_lenovo()) {
-		dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
-			   "using Lenovo default hot key map\n");
-		memcpy(hotkey_keycode_map, &lenovo_keycode_map,
-			TPACPI_HOTKEY_MAP_SIZE);
-	} else {
-		dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
-			   "using IBM default hot key map\n");
-		memcpy(hotkey_keycode_map, &ibm_keycode_map,
-			TPACPI_HOTKEY_MAP_SIZE);
-	}
+	keymap_id = tpacpi_check_quirks(tpacpi_keymap_qtable,
+					ARRAY_SIZE(tpacpi_keymap_qtable));
+	BUG_ON(keymap_id >= ARRAY_SIZE(tpacpi_keymaps));
+	dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
+		   "using keymap number %lu\n", keymap_id);
+
+	memcpy(hotkey_keycode_map, &tpacpi_keymaps[keymap_id],
+		TPACPI_HOTKEY_MAP_SIZE);
 
 	input_set_capability(tpacpi_inputdev, EV_MSC, MSC_SCAN);
 	tpacpi_inputdev->keycodesize = TPACPI_HOTKEY_MAP_TYPESIZE;
@@ -3469,7 +3503,8 @@ static bool hotkey_notify_hotkey(const u32 hkey,
 	*send_acpi_ev = true;
 	*ignore_acpi_ev = false;
 
-	if (scancode > 0 && scancode < 0x21) {
+	/* HKEY event 0x1001 is scancode 0x00 */
+	if (scancode > 0 && scancode <= TPACPI_HOTKEY_MAP_LEN) {
 		scancode--;
 		if (!(hotkey_source_mask & (1 << scancode))) {
 			tpacpi_input_send_key_masked(scancode);
@@ -6080,13 +6115,18 @@ static struct backlight_ops ibm_backlight_data = {
 
 /* --------------------------------------------------------------------- */
 
+/*
+ * Call _BCL method of video device.  On some ThinkPads this will
+ * switch the firmware to the ACPI brightness control mode.
+ */
+
 static int __init tpacpi_query_bcl_levels(acpi_handle handle)
 {
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	union acpi_object *obj;
 	int rc;
 
-	if (ACPI_SUCCESS(acpi_evaluate_object(handle, NULL, NULL, &buffer))) {
+	if (ACPI_SUCCESS(acpi_evaluate_object(handle, "_BCL", NULL, &buffer))) {
 		obj = (union acpi_object *)buffer.pointer;
 		if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) {
 			printk(TPACPI_ERR "Unknown _BCL data, "
@@ -6103,55 +6143,22 @@ static int __init tpacpi_query_bcl_levels(acpi_handle handle)
 	return rc;
 }
 
-static acpi_status __init tpacpi_acpi_walk_find_bcl(acpi_handle handle,
-					u32 lvl, void *context, void **rv)
-{
-	char name[ACPI_PATH_SEGMENT_LENGTH];
-	struct acpi_buffer buffer = { sizeof(name), &name };
-
-	if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) &&
-	    !strncmp("_BCL", name, sizeof(name) - 1)) {
-		BUG_ON(!rv || !*rv);
-		**(int **)rv = tpacpi_query_bcl_levels(handle);
-		return AE_CTRL_TERMINATE;
-	} else {
-		return AE_OK;
-	}
-}
 
 /*
  * Returns 0 (no ACPI _BCL or _BCL invalid), or size of brightness map
  */
 static unsigned int __init tpacpi_check_std_acpi_brightness_support(void)
 {
-	int status;
+	acpi_handle video_device;
 	int bcl_levels = 0;
-	void *bcl_ptr = &bcl_levels;
-
-	if (!vid_handle)
-		TPACPI_ACPIHANDLE_INIT(vid);
-
-	if (!vid_handle)
-		return 0;
-
-	/*
-	 * Search for a _BCL method, and execute it.  This is safe on all
-	 * ThinkPads, and as a side-effect, _BCL will place a Lenovo Vista
-	 * BIOS in ACPI backlight control mode.  We do NOT have to care
-	 * about calling the _BCL method in an enabled video device, any
-	 * will do for our purposes.
-	 */
 
-	status = acpi_walk_namespace(ACPI_TYPE_METHOD, vid_handle, 3,
-				     tpacpi_acpi_walk_find_bcl, NULL, NULL,
-				     &bcl_ptr);
+	tpacpi_acpi_handle_locate("video", ACPI_VIDEO_HID, &video_device);
+	if (video_device)
+		bcl_levels = tpacpi_query_bcl_levels(video_device);
 
-	if (ACPI_SUCCESS(status) && bcl_levels > 2) {
-		tp_features.bright_acpimode = 1;
-		return bcl_levels - 2;
-	}
+	tp_features.bright_acpimode = (bcl_levels > 0);
 
-	return 0;
+	return (bcl_levels > 2) ? (bcl_levels - 2) : 0;
 }
 
 /*
@@ -6244,28 +6251,6 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
 	if (tp_features.bright_unkfw)
 		return 1;
 
-	if (tp_features.bright_acpimode) {
-		if (acpi_video_backlight_support()) {
-			if (brightness_enable > 1) {
-				printk(TPACPI_NOTICE
-				       "Standard ACPI backlight interface "
-				       "available, not loading native one.\n");
-				return 1;
-			} else if (brightness_enable == 1) {
-				printk(TPACPI_NOTICE
-				       "Backlight control force enabled, even if standard "
-				       "ACPI backlight interface is available\n");
-			}
-		} else {
-			if (brightness_enable > 1) {
-				printk(TPACPI_NOTICE
-				       "Standard ACPI backlight interface not "
-				       "available, thinkpad_acpi native "
-				       "brightness control enabled\n");
-			}
-		}
-	}
-
 	if (!brightness_enable) {
 		dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT,
 			   "brightness support disabled by "
@@ -6273,6 +6258,26 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
 		return 1;
 	}
 
+	if (acpi_video_backlight_support()) {
+		if (brightness_enable > 1) {
+			printk(TPACPI_INFO
+			       "Standard ACPI backlight interface "
+			       "available, not loading native one.\n");
+			return 1;
+		} else if (brightness_enable == 1) {
+			printk(TPACPI_WARN
+				"Cannot enable backlight brightness support, "
+				"ACPI is already handling it.  Refer to the "
+				"acpi_backlight kernel parameter\n");
+			return 1;
+		}
+	} else if (tp_features.bright_acpimode && brightness_enable > 1) {
+		printk(TPACPI_NOTICE
+			"Standard ACPI backlight interface not "
+			"available, thinkpad_acpi native "
+			"brightness control enabled\n");
+	}
+
 	/*
 	 * Check for module parameter bogosity, note that we
 	 * init brightness_mode to TPACPI_BRGHT_MODE_MAX in order to be