atiixp: PIO mode setup fixes

* Split off exisiting atiixp_tuneproc() into atiixp_tune_pio()
  and then add setting device PIO mode to atiixp_tuneproc().

* Add missing ide_get_best_pio_mode() call to atiixp_tuneproc() so
  "pio" == 255 (autotune) is handled correctly and "pio" values > 4 && < 255
  are filtered to PIO4 (previously "pio" == 5 could result in wrong timings
  being used and "pio" values > 4 && < 255 in an OOPS).

* Handle PIO modes early in atiixp_speedproc() so save_mdma_mode[]
  doesn't get cleared.

* In atiixp_dma_check():
  - fix max_mode argument for ide_get_best_pio_mode()
  - don't call atiixp_dma_2_pio() so PIO1 doesn't get remapped to PIO0
  - use atiixp_tuneproc() instead of atiixp_speedproc()

* Bump driver version.
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 9702b5d5
/*
* linux/drivers/ide/pci/atiixp.c Version 0.01-bart2 Feb. 26, 2004
* linux/drivers/ide/pci/atiixp.c Version 0.02 Jun 16 2007
*
* Copyright (C) 2003 ATI Inc. <hyu@ati.com>
* Copyright (C) 2004 Bartlomiej Zolnierkiewicz
*
* Copyright (C) 2004,2007 Bartlomiej Zolnierkiewicz
*/
#include <linux/types.h>
......@@ -123,14 +122,14 @@ static void atiixp_dma_host_off(ide_drive_t *drive)
}
/**
* atiixp_tune_drive - tune a drive attached to a ATIIXP
* atiixp_tune_pio - tune a drive attached to a ATIIXP
* @drive: drive to tune
* @pio: desired PIO mode
*
* Set the interface PIO mode.
*/
static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
static void atiixp_tune_pio(ide_drive_t *drive, u8 pio)
{
struct pci_dev *dev = drive->hwif->pci_dev;
unsigned long flags;
......@@ -154,6 +153,13 @@ static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
spin_unlock_irqrestore(&atiixp_lock, flags);
}
static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
atiixp_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
/**
* atiixp_tune_chipset - tune a ATIIXP interface
* @drive: IDE drive to tune
......@@ -175,6 +181,11 @@ static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed)
speed = ide_rate_filter(drive, xferspeed);
if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
atiixp_tune_pio(drive, speed - XFER_PIO_0);
return ide_config_drive_speed(drive, speed);
}
spin_lock_irqsave(&atiixp_lock, flags);
save_mdma_mode[drive->dn] = 0;
......@@ -201,7 +212,7 @@ static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed)
else
pio = speed - XFER_PIO_0;
atiixp_tuneproc(drive, pio);
atiixp_tune_pio(drive, pio);
return ide_config_drive_speed(drive, speed);
}
......@@ -216,18 +227,13 @@ static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed)
static int atiixp_dma_check(ide_drive_t *drive)
{
u8 tspeed, speed;
drive->init_speed = 0;
if (ide_tune_dma(drive))
return 0;
if (ide_use_fast_pio(drive)) {
tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
speed = atiixp_dma_2_pio(XFER_PIO_0 + tspeed) + XFER_PIO_0;
atiixp_speedproc(drive, speed);
}
if (ide_use_fast_pio(drive))
atiixp_tuneproc(drive, 255);
return -1;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment