r8169: remove not needed PHY soft reset in rtl8168e_2_hw_phy_config

rtl8169_init_phy() resets the PHY anyway after applying the chip-specific
PHY configuration. So we don't need to soft-reset the PHY as part of the
chip-specific configuration.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/realtek/r8169.c

@@ -3800,8 +3800,6 @@ static void rtl8168e_2_hw_phy_config(struct rtl8169_private *tp)
 	rtl_writephy(tp, 0x1f, 0x0005);
 	rtl_w0w1_phy(tp, 0x01, 0x0100, 0x0000);
 	rtl_writephy(tp, 0x1f, 0x0000);
-	/* soft-reset phy */
-	rtl_writephy(tp, MII_BMCR, BMCR_RESET | BMCR_ANENABLE | BMCR_ANRESTART);
 
 	/* Broken BIOS workaround: feed GigaMAC registers with MAC address. */
 	rtl_rar_exgmac_set(tp, tp->dev->dev_addr);