arm64: dts: exynos: Move FSYS CMU configuration from Exynos5433 dtsi to TM2 dts

Move initial FSYS CMU (related to USB 3.0 devices) clocks configuration
from generic exynos5433.dtsi file to exynos5433-tm2.dts, as this is
a board specific item.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

arch/arm64/boot/dts/exynos/exynos5433-tm2.dts

@@ -158,6 +158,29 @@ thermistor-charger {
 	};
 };
 
+&cmu_fsys {
+	assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
+		<&cmu_top CLK_MOUT_SCLK_USBHOST30>,
+		<&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
+		<&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
+		<&cmu_top CLK_DIV_SCLK_USBDRD30>,
+		<&cmu_top CLK_DIV_SCLK_USBHOST30>;
+	assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
+		<&cmu_top CLK_MOUT_BUS_PLL_USER>,
+		<&cmu_top CLK_SCLK_USBDRD30_FSYS>,
+		<&cmu_top CLK_SCLK_USBHOST30_FSYS>,
+		<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
+		<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
+		<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
+		<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
+			       <66700000>, <66700000>;
+};
+
 &cpu0 {
 	cpu-supply = <&buck3_reg>;
 };

arch/arm64/boot/dts/exynos/exynos5433.dtsi

@@ -1143,14 +1143,6 @@ usbdrd30: usb@15400000  {
 			clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
 				<&cmu_fsys CLK_SCLK_USBDRD30>;
 			clock-names = "usbdrd30", "usbdrd30_susp_clk";
-			assigned-clocks =
-				<&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
-				<&cmu_top CLK_MOUT_SCLK_USBDRD30>,
-				<&cmu_top CLK_DIV_SCLK_USBDRD30>;
-			assigned-clock-parents =
-				<&cmu_top CLK_SCLK_USBDRD30_FSYS>,
-				<&cmu_top CLK_MOUT_BUS_PLL_USER>;
-			assigned-clock-rates = <0>, <0>, <66700000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1174,12 +1166,6 @@ usbdrd30_phy: phy@15500000 {
 				<&cmu_fsys CLK_SCLK_USBDRD30>;
 			clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
 					"itp";
-			assigned-clocks =
-				<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
-				<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>;
-			assigned-clock-parents =
-				<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
-				<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>;
 			#phy-cells = <1>;
 			samsung,pmu-syscon = <&pmu_system_controller>;
 			status = "disabled";
@@ -1194,12 +1180,6 @@ usbhost30_phy: phy@15580000 {
 				<&cmu_fsys CLK_SCLK_USBHOST30>;
 			clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
 					"itp";
-			assigned-clocks =
-				<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
-				<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>;
-			assigned-clock-parents =
-				<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
-				<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
 			#phy-cells = <1>;
 			samsung,pmu-syscon = <&pmu_system_controller>;
 			status = "disabled";
@@ -1210,14 +1190,6 @@ usbhost30: usb@15a00000 {
 			clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
 				<&cmu_fsys CLK_SCLK_USBHOST30>;
 			clock-names = "usbdrd30", "usbdrd30_susp_clk";
-			assigned-clocks =
-				<&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
-				<&cmu_top CLK_MOUT_SCLK_USBHOST30>,
-				<&cmu_top CLK_DIV_SCLK_USBHOST30>;
-			assigned-clock-parents =
-				<&cmu_top CLK_SCLK_USBHOST30_FSYS>,
-				<&cmu_top CLK_MOUT_BUS_PLL_USER>;
-			assigned-clock-rates = <0>, <0>, <66700000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;