Commit 4cfee88a authored by Mel Gorman's avatar Mel Gorman Committed by Linus Torvalds

[PATCH] Have x86 use add_active_range() and free_area_init_nodes

Size zones and holes in an architecture independent manner for x86.

[akpm@osdl.org: build fix]
Signed-off-by: default avatarMel Gorman <mel@csn.ul.ie>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Keith Mannthey" <kmannth@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent c67c3cb4
......@@ -598,12 +598,10 @@ config ARCH_SELECT_MEMORY_MODEL
def_bool y
depends on ARCH_SPARSEMEM_ENABLE
source "mm/Kconfig"
config ARCH_POPULATES_NODE_MAP
def_bool y
config HAVE_ARCH_EARLY_PFN_TO_NID
bool
default y
depends on NUMA
source "mm/Kconfig"
config HIGHPTE
bool "Allocate 3rd-level pagetables from highmem"
......
......@@ -1089,22 +1089,20 @@ static unsigned long __init setup_memory(void)
void __init zone_sizes_init(void)
{
unsigned long zones_size[MAX_NR_ZONES] = { 0, };
unsigned int max_dma, low;
max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
low = max_low_pfn;
if (low < max_dma)
zones_size[ZONE_DMA] = low;
else {
zones_size[ZONE_DMA] = max_dma;
zones_size[ZONE_NORMAL] = low - max_dma;
#ifdef CONFIG_HIGHMEM
zones_size[ZONE_HIGHMEM] = highend_pfn - low;
unsigned long max_zone_pfns[MAX_NR_ZONES] = {
virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT,
max_low_pfn,
highend_pfn};
add_active_range(0, 0, highend_pfn);
#else
unsigned long max_zone_pfns[MAX_NR_ZONES] = {
virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT,
max_low_pfn};
add_active_range(0, 0, max_low_pfn);
#endif
}
free_area_init(zones_size);
free_area_init_nodes(max_zone_pfns);
}
#else
extern unsigned long __init setup_memory(void);
......
......@@ -54,8 +54,6 @@ struct node_memory_chunk_s {
static struct node_memory_chunk_s node_memory_chunk[MAXCHUNKS];
static int num_memory_chunks; /* total number of memory chunks */
static int zholes_size_init;
static unsigned long zholes_size[MAX_NUMNODES * MAX_NR_ZONES];
extern void * boot_ioremap(unsigned long, unsigned long);
......@@ -135,47 +133,6 @@ static void __init parse_memory_affinity_structure (char *sratp)
"enabled and removable" : "enabled" ) );
}
/* Take a chunk of pages from page frame cstart to cend and count the number
* of pages in each zone, returned via zones[].
*/
static __init void chunk_to_zones(unsigned long cstart, unsigned long cend,
unsigned long *zones)
{
unsigned long max_dma;
extern unsigned long max_low_pfn;
int z;
unsigned long rend;
/* FIXME: MAX_DMA_ADDRESS and max_low_pfn are trying to provide
* similarly scoped information and should be handled in a consistant
* manner.
*/
max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
/* Split the hole into the zones in which it falls. Repeatedly
* take the segment in which the remaining hole starts, round it
* to the end of that zone.
*/
memset(zones, 0, MAX_NR_ZONES * sizeof(long));
while (cstart < cend) {
if (cstart < max_dma) {
z = ZONE_DMA;
rend = (cend < max_dma)? cend : max_dma;
} else if (cstart < max_low_pfn) {
z = ZONE_NORMAL;
rend = (cend < max_low_pfn)? cend : max_low_pfn;
} else {
z = ZONE_HIGHMEM;
rend = cend;
}
zones[z] += rend - cstart;
cstart = rend;
}
}
/*
* The SRAT table always lists ascending addresses, so can always
* assume that the first "start" address that you see is the real
......@@ -220,7 +177,6 @@ static int __init acpi20_parse_srat(struct acpi_table_srat *sratp)
memset(pxm_bitmap, 0, sizeof(pxm_bitmap)); /* init proximity domain bitmap */
memset(node_memory_chunk, 0, sizeof(node_memory_chunk));
memset(zholes_size, 0, sizeof(zholes_size));
num_memory_chunks = 0;
while (p < end) {
......@@ -284,6 +240,7 @@ static int __init acpi20_parse_srat(struct acpi_table_srat *sratp)
printk("chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
j, chunk->nid, chunk->start_pfn, chunk->end_pfn);
node_read_chunk(chunk->nid, chunk);
add_active_range(chunk->nid, chunk->start_pfn, chunk->end_pfn);
}
for_each_online_node(nid) {
......@@ -392,57 +349,7 @@ int __init get_memcfg_from_srat(void)
return acpi20_parse_srat((struct acpi_table_srat *)header);
}
out_err:
remove_all_active_ranges();
printk("failed to get NUMA memory information from SRAT table\n");
return 0;
}
/* For each node run the memory list to determine whether there are
* any memory holes. For each hole determine which ZONE they fall
* into.
*
* NOTE#1: this requires knowledge of the zone boundries and so
* _cannot_ be performed before those are calculated in setup_memory.
*
* NOTE#2: we rely on the fact that the memory chunks are ordered by
* start pfn number during setup.
*/
static void __init get_zholes_init(void)
{
int nid;
int c;
int first;
unsigned long end = 0;
for_each_online_node(nid) {
first = 1;
for (c = 0; c < num_memory_chunks; c++){
if (node_memory_chunk[c].nid == nid) {
if (first) {
end = node_memory_chunk[c].end_pfn;
first = 0;
} else {
/* Record any gap between this chunk
* and the previous chunk on this node
* against the zones it spans.
*/
chunk_to_zones(end,
node_memory_chunk[c].start_pfn,
&zholes_size[nid * MAX_NR_ZONES]);
}
}
}
}
}
unsigned long * __init get_zholes_size(int nid)
{
if (!zholes_size_init) {
zholes_size_init++;
get_zholes_init();
}
if (nid >= MAX_NUMNODES || !node_online(nid))
printk("%s: nid = %d is invalid/offline. num_online_nodes = %d",
__FUNCTION__, nid, num_online_nodes());
return &zholes_size[nid * MAX_NR_ZONES];
}
......@@ -157,21 +157,6 @@ static void __init find_max_pfn_node(int nid)
BUG();
}
/* Find the owning node for a pfn. */
int early_pfn_to_nid(unsigned long pfn)
{
int nid;
for_each_node(nid) {
if (node_end_pfn[nid] == 0)
break;
if (node_start_pfn[nid] <= pfn && node_end_pfn[nid] >= pfn)
return nid;
}
return 0;
}
/*
* Allocate memory for the pg_data_t for this node via a crude pre-bootmem
* method. For node zero take this from the bottom of memory, for
......@@ -227,6 +212,8 @@ static unsigned long calculate_numa_remap_pages(void)
unsigned long pfn;
for_each_online_node(nid) {
unsigned old_end_pfn = node_end_pfn[nid];
/*
* The acpi/srat node info can show hot-add memroy zones
* where memory could be added but not currently present.
......@@ -276,6 +263,7 @@ static unsigned long calculate_numa_remap_pages(void)
node_end_pfn[nid] -= size;
node_remap_start_pfn[nid] = node_end_pfn[nid];
shrink_active_range(nid, old_end_pfn, node_end_pfn[nid]);
}
printk("Reserving total of %ld pages for numa KVA remap\n",
reserve_pages);
......@@ -369,45 +357,22 @@ void __init numa_kva_reserve(void)
void __init zone_sizes_init(void)
{
int nid;
for_each_online_node(nid) {
unsigned long zones_size[MAX_NR_ZONES] = {0, };
unsigned long *zholes_size;
unsigned int max_dma;
unsigned long low = max_low_pfn;
unsigned long start = node_start_pfn[nid];
unsigned long high = node_end_pfn[nid];
max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
if (node_has_online_mem(nid)){
if (start > low) {
#ifdef CONFIG_HIGHMEM
BUG_ON(start > high);
zones_size[ZONE_HIGHMEM] = high - start;
#endif
} else {
if (low < max_dma)
zones_size[ZONE_DMA] = low;
else {
BUG_ON(max_dma > low);
BUG_ON(low > high);
zones_size[ZONE_DMA] = max_dma;
zones_size[ZONE_NORMAL] = low - max_dma;
#ifdef CONFIG_HIGHMEM
zones_size[ZONE_HIGHMEM] = high - low;
#endif
}
}
unsigned long max_zone_pfns[MAX_NR_ZONES] = {
virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT,
max_low_pfn,
highend_pfn
};
/* If SRAT has not registered memory, register it now */
if (find_max_pfn_with_active_regions() == 0) {
for_each_online_node(nid) {
if (node_has_online_mem(nid))
add_active_range(nid, node_start_pfn[nid],
node_end_pfn[nid]);
}
zholes_size = get_zholes_size(nid);
free_area_init_node(nid, NODE_DATA(nid), zones_size, start,
zholes_size);
}
free_area_init_nodes(max_zone_pfns);
return;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment