Commit 4d0982c6 authored by Dave Airlie's avatar Dave Airlie

Merge branch 'drm-next0401' of git://github.com/markyzq/kernel-drm-rockchip into drm-next

   These are based on drm-next branch, fix some drm/rockchip problem.
   Please pull them.

* 'drm-next0401' of git://github.com/markyzq/kernel-drm-rockchip:
  drm/rockchip: vop: add vop power domain support
  drm: rockchip: Turn off VT switching on suspend
  drm/rockchip: register all connectors after bind
  drm/rockchip: fix clk enable disable mismatch in vop_crtc_mode_set
parents 502e95c6 5d82d1a7
......@@ -129,6 +129,7 @@ static int rockchip_drm_load(struct drm_device *drm_dev, unsigned long flags)
struct rockchip_drm_private *private;
struct dma_iommu_mapping *mapping;
struct device *dev = drm_dev->dev;
struct drm_connector *connector;
int ret;
private = devm_kzalloc(drm_dev->dev, sizeof(*private), GFP_KERNEL);
......@@ -171,6 +172,23 @@ static int rockchip_drm_load(struct drm_device *drm_dev, unsigned long flags)
if (ret)
goto err_detach_device;
/*
* All components are now added, we can publish the connector sysfs
* entries to userspace. This will generate hotplug events and so
* userspace will expect to be able to access DRM at this point.
*/
list_for_each_entry(connector, &drm_dev->mode_config.connector_list,
head) {
ret = drm_connector_register(connector);
if (ret) {
dev_err(drm_dev->dev,
"[CONNECTOR:%d:%s] drm_connector_register failed: %d\n",
connector->base.id,
connector->name, ret);
goto err_unbind;
}
}
/* init kms poll for handling hpd */
drm_kms_helper_poll_init(drm_dev);
......@@ -200,6 +218,7 @@ static int rockchip_drm_load(struct drm_device *drm_dev, unsigned long flags)
drm_vblank_cleanup(drm_dev);
err_kms_helper_poll_fini:
drm_kms_helper_poll_fini(drm_dev);
err_unbind:
component_unbind_all(dev, drm_dev);
err_detach_device:
arm_iommu_detach_device(dev);
......
......@@ -119,6 +119,9 @@ static int rockchip_drm_fbdev_create(struct drm_fb_helper *helper,
DRM_DEBUG_KMS("FB [%dx%d]-%d kvaddr=%p offset=%ld size=%d\n",
fb->width, fb->height, fb->depth, rk_obj->kvaddr,
offset, size);
fbi->skip_vt_switch = true;
return 0;
err_drm_framebuffer_unref:
......
......@@ -421,6 +421,12 @@ static void vop_enable(struct drm_crtc *crtc)
if (vop->is_enabled)
return;
ret = pm_runtime_get_sync(vop->dev);
if (ret < 0) {
dev_err(vop->dev, "failed to get pm runtime: %d\n", ret);
return;
}
ret = clk_enable(vop->hclk);
if (ret < 0) {
dev_err(vop->dev, "failed to enable hclk - %d\n", ret);
......@@ -517,6 +523,7 @@ static void vop_disable(struct drm_crtc *crtc)
clk_disable(vop->dclk);
clk_disable(vop->aclk);
clk_disable(vop->hclk);
pm_runtime_put(vop->dev);
}
/*
......@@ -893,7 +900,7 @@ static int vop_crtc_mode_set(struct drm_crtc *crtc,
u16 vsync_len = adjusted_mode->vsync_end - adjusted_mode->vsync_start;
u16 vact_st = adjusted_mode->vtotal - adjusted_mode->vsync_start;
u16 vact_end = vact_st + vdisplay;
int ret;
int ret, ret_clk;
uint32_t val;
/*
......@@ -915,7 +922,8 @@ static int vop_crtc_mode_set(struct drm_crtc *crtc,
default:
DRM_ERROR("unsupport connector_type[%d]\n",
vop->connector_type);
return -EINVAL;
ret = -EINVAL;
goto out;
};
VOP_CTRL_SET(vop, out_mode, vop->connector_out_mode);
......@@ -938,7 +946,7 @@ static int vop_crtc_mode_set(struct drm_crtc *crtc,
ret = vop_crtc_mode_set_base(crtc, x, y, fb);
if (ret)
return ret;
goto out;
/*
* reset dclk, take all mode config affect, so the clk would run in
......@@ -949,13 +957,14 @@ static int vop_crtc_mode_set(struct drm_crtc *crtc,
reset_control_deassert(vop->dclk_rst);
clk_set_rate(vop->dclk, adjusted_mode->clock * 1000);
ret = clk_enable(vop->dclk);
if (ret < 0) {
dev_err(vop->dev, "failed to enable dclk - %d\n", ret);
return ret;
out:
ret_clk = clk_enable(vop->dclk);
if (ret_clk < 0) {
dev_err(vop->dev, "failed to enable dclk - %d\n", ret_clk);
return ret_clk;
}
return 0;
return ret;
}
static void vop_crtc_commit(struct drm_crtc *crtc)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment