Commit 4d703847 authored by Arik Nemtsov's avatar Arik Nemtsov Committed by Luciano Coelho

wl18xx: set last Tx rate from FW status

Obtain the last Tx rate from the FW status and translate it to
the mac80211 rate+flag format before sending it up via the Tx status.
Signed-off-by: default avatarArik Nemtsov <arik@wizery.com>
Signed-off-by: default avatarLuciano Coelho <coelho@ti.com>
parent 0e810479
......@@ -28,6 +28,49 @@
#include "wl18xx.h"
#include "tx.h"
static
void wl18xx_get_last_tx_rate(struct wl1271 *wl, struct ieee80211_vif *vif,
struct ieee80211_tx_rate *rate)
{
u8 fw_rate = wl->fw_status_2->counters.tx_last_rate;
if (fw_rate > CONF_HW_RATE_INDEX_MAX) {
wl1271_error("last Tx rate invalid: %d", fw_rate);
rate->idx = 0;
rate->flags = 0;
return;
}
if (fw_rate <= CONF_HW_RATE_INDEX_54MBPS) {
rate->idx = fw_rate;
rate->flags = 0;
} else {
rate->flags = IEEE80211_TX_RC_MCS;
rate->idx = fw_rate - CONF_HW_RATE_INDEX_MCS0;
/* SGI modifier is counted as a separate rate */
if (fw_rate >= CONF_HW_RATE_INDEX_MCS7_SGI)
(rate->idx)--;
if (fw_rate == CONF_HW_RATE_INDEX_MCS15_SGI)
(rate->idx)--;
/* this also covers the 40Mhz SGI case (= MCS15) */
if (fw_rate == CONF_HW_RATE_INDEX_MCS7_SGI ||
fw_rate == CONF_HW_RATE_INDEX_MCS15_SGI)
rate->flags |= IEEE80211_TX_RC_SHORT_GI;
if (fw_rate > CONF_HW_RATE_INDEX_MCS7_SGI && vif) {
struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif);
if (wlvif->channel_type == NL80211_CHAN_HT40MINUS ||
wlvif->channel_type == NL80211_CHAN_HT40PLUS) {
/* adjustment needed for range 0-7 */
rate->idx -= 8;
rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
}
}
}
}
static void wl18xx_tx_complete_packet(struct wl1271 *wl, u8 tx_stat_byte)
{
struct ieee80211_tx_info *info;
......@@ -44,7 +87,6 @@ static void wl18xx_tx_complete_packet(struct wl1271 *wl, u8 tx_stat_byte)
/* a zero bit indicates Tx success */
tx_success = !(tx_stat_byte & BIT(WL18XX_TX_STATUS_STAT_BIT_IDX));
skb = wl->tx_frames[id];
info = IEEE80211_SKB_CB(skb);
......@@ -56,11 +98,13 @@ static void wl18xx_tx_complete_packet(struct wl1271 *wl, u8 tx_stat_byte)
/* update the TX status info */
if (tx_success && !(info->flags & IEEE80211_TX_CTL_NO_ACK))
info->flags |= IEEE80211_TX_STAT_ACK;
/*
* first pass info->control.vif while it's valid, and then fill out
* the info->status structures
*/
wl18xx_get_last_tx_rate(wl, info->control.vif, &info->status.rates[0]);
/* no real data about Tx completion */
info->status.rates[0].idx = -1;
info->status.rates[0].count = 0;
info->status.rates[0].flags = 0;
info->status.rates[0].count = 1; /* no data about retries */
info->status.ack_signal = -1;
if (!tx_success)
......
......@@ -57,20 +57,49 @@ enum {
};
enum {
CONF_HW_RATE_INDEX_1MBPS = 0,
CONF_HW_RATE_INDEX_2MBPS = 1,
CONF_HW_RATE_INDEX_5_5MBPS = 2,
CONF_HW_RATE_INDEX_6MBPS = 3,
CONF_HW_RATE_INDEX_9MBPS = 4,
CONF_HW_RATE_INDEX_11MBPS = 5,
CONF_HW_RATE_INDEX_12MBPS = 6,
CONF_HW_RATE_INDEX_18MBPS = 7,
CONF_HW_RATE_INDEX_22MBPS = 8,
CONF_HW_RATE_INDEX_24MBPS = 9,
CONF_HW_RATE_INDEX_36MBPS = 10,
CONF_HW_RATE_INDEX_48MBPS = 11,
CONF_HW_RATE_INDEX_54MBPS = 12,
CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_54MBPS,
CONF_HW_RATE_INDEX_1MBPS = 0,
CONF_HW_RATE_INDEX_2MBPS = 1,
CONF_HW_RATE_INDEX_5_5MBPS = 2,
CONF_HW_RATE_INDEX_11MBPS = 3,
CONF_HW_RATE_INDEX_6MBPS = 4,
CONF_HW_RATE_INDEX_9MBPS = 5,
CONF_HW_RATE_INDEX_12MBPS = 6,
CONF_HW_RATE_INDEX_18MBPS = 7,
CONF_HW_RATE_INDEX_24MBPS = 8,
CONF_HW_RATE_INDEX_36MBPS = 9,
CONF_HW_RATE_INDEX_48MBPS = 10,
CONF_HW_RATE_INDEX_54MBPS = 11,
CONF_HW_RATE_INDEX_MCS0 = 12,
CONF_HW_RATE_INDEX_MCS1 = 13,
CONF_HW_RATE_INDEX_MCS2 = 14,
CONF_HW_RATE_INDEX_MCS3 = 15,
CONF_HW_RATE_INDEX_MCS4 = 16,
CONF_HW_RATE_INDEX_MCS5 = 17,
CONF_HW_RATE_INDEX_MCS6 = 18,
CONF_HW_RATE_INDEX_MCS7 = 19,
CONF_HW_RATE_INDEX_MCS7_SGI = 20,
CONF_HW_RATE_INDEX_MCS0_40MHZ = 21,
CONF_HW_RATE_INDEX_MCS1_40MHZ = 22,
CONF_HW_RATE_INDEX_MCS2_40MHZ = 23,
CONF_HW_RATE_INDEX_MCS3_40MHZ = 24,
CONF_HW_RATE_INDEX_MCS4_40MHZ = 25,
CONF_HW_RATE_INDEX_MCS5_40MHZ = 26,
CONF_HW_RATE_INDEX_MCS6_40MHZ = 27,
CONF_HW_RATE_INDEX_MCS7_40MHZ = 28,
CONF_HW_RATE_INDEX_MCS7_40MHZ_SGI = 29,
/* MCS8+ rates overlap with 40Mhz rates */
CONF_HW_RATE_INDEX_MCS8 = 21,
CONF_HW_RATE_INDEX_MCS9 = 22,
CONF_HW_RATE_INDEX_MCS10 = 23,
CONF_HW_RATE_INDEX_MCS11 = 24,
CONF_HW_RATE_INDEX_MCS12 = 25,
CONF_HW_RATE_INDEX_MCS13 = 26,
CONF_HW_RATE_INDEX_MCS14 = 27,
CONF_HW_RATE_INDEX_MCS15 = 28,
CONF_HW_RATE_INDEX_MCS15_SGI = 29,
CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_MCS7_40MHZ_SGI,
};
#define CONF_HW_RXTX_RATE_UNSUPPORTED 0xff
......
......@@ -130,7 +130,10 @@ struct wl_fw_packet_counters {
/* Cumulative counter of released Voice memory blocks */
u8 tx_voice_released_blks;
u8 padding[3];
/* Tx rate of the last transmitted packet */
u8 tx_last_rate;
u8 padding[2];
} __packed;
/* FW status registers */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment