Commit 4d9b4001 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

USB: serial: visor: convert dbg() to dev_dbg()

This removes most of the dbg() calls, as they were just tracing calls,
and converts the remaining ones to dev_dbg().
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent d8789b2b
......@@ -239,8 +239,6 @@ static int visor_open(struct tty_struct *tty, struct usb_serial_port *port)
{
int result = 0;
dbg("%s - port %d", __func__, port->number);
if (!port->read_urb) {
/* this is needed for some brain dead Sony devices */
dev_err(&port->dev, "Device lied about number of ports, please use a lower one.\n");
......@@ -253,7 +251,7 @@ static int visor_open(struct tty_struct *tty, struct usb_serial_port *port)
goto exit;
if (port->interrupt_in_urb) {
dbg("%s - adding interrupt input for treo", __func__);
dev_dbg(&port->dev, "adding interrupt input for treo\n");
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result)
dev_err(&port->dev,
......@@ -269,8 +267,6 @@ static void visor_close(struct usb_serial_port *port)
{
unsigned char *transfer_buffer;
dbg("%s - port %d", __func__, port->number);
/* shutdown our urbs */
usb_serial_generic_close(port);
usb_kill_urb(port->interrupt_in_urb);
......@@ -305,12 +301,12 @@ static void visor_read_int_callback(struct urb *urb)
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
__func__, status);
dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
__func__, status);
return;
default:
dbg("%s - nonzero urb status received: %d",
__func__, status);
dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
__func__, status);
goto exit;
}
......@@ -343,8 +339,6 @@ static int palm_os_3_probe(struct usb_serial *serial,
int i;
int num_ports = 0;
dbg("%s", __func__);
transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL);
if (!transfer_buffer) {
dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__,
......@@ -440,8 +434,6 @@ static int palm_os_4_probe(struct usb_serial *serial,
unsigned char *transfer_buffer;
int retval;
dbg("%s", __func__);
transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL);
if (!transfer_buffer) {
dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__,
......@@ -473,8 +465,6 @@ static int visor_probe(struct usb_serial *serial,
int (*startup)(struct usb_serial *serial,
const struct usb_device_id *id);
dbg("%s", __func__);
/*
* some Samsung Android phones in modem mode have the same ID
* as SPH-I500, but they are ACM devices, so dont bind to them
......@@ -516,8 +506,6 @@ static int clie_3_5_startup(struct usb_serial *serial)
int result;
u8 *data;
dbg("%s", __func__);
data = kmalloc(1, GFP_KERNEL);
if (!data)
return -ENOMEM;
......@@ -580,8 +568,6 @@ static int treo_attach(struct usb_serial *serial)
(serial->num_interrupt_in == 0))
return 0;
dbg("%s", __func__);
/*
* It appears that Treos and Kyoceras want to use the
* 1st bulk in endpoint to communicate with the 2nd bulk out endpoint,
......@@ -617,8 +603,6 @@ static int clie_5_attach(struct usb_serial *serial)
unsigned int pipe;
int j;
dbg("%s", __func__);
/* TH55 registers 2 ports.
Communication in from the UX50/TH55 uses bulk_in_endpointAddress
from port 0. Communication out to the UX50/TH55 uses
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment