Merge tag 'mtd/for-5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Richard Weinberger:
 "MTD core changes:
   - New AFS partition parser
   - Update MAINTAINERS entry
   - Use of fall-throughs markers

  NAND core changes:
   - Support having the bad block markers in either the first, second or
     last page of a block. The combination of all three location is now
     possible.
   - Constification of NAND_OP_PARSER(_PATTERN) elements.
   - Generic NAND DT bindings changed to yaml format (can be used to
     check the proposed bindings. First platform to be fully supported:
     sunxi.
   - Stopped using several legacy hooks.
   - Preparation to use the generic NAND layer with the addition of
     several helpers and the removal of the struct nand_chip from
     generic functions.
   - Kconfig cleanup to prepare the introduction of external ECC engines
     support.
   - Fallthrough comments.
   - Introduction of the SPI-mem dirmap API for SPI-NAND devices.

  Raw NAND controller drivers changes:
   - nandsim:
      - Switch to ->exec-op().
   - meson:
      - Misc cleanups and fixes.
      - New OOB layout.
   - Sunxi:
      - A23/A33 NAND DMA support.
   - Ingenic:
      - Full reorganization and cleanup.
      - Clear separation between NAND controller and ECC engine.
      - Support JZ4740 an JZ4725B.
   - Denali:
      - Clear controller/chip separation.
      - ->exec_op() migration.
      - Various cleanups.
   - fsl_elbc:
      - Enable software ECC support.
   - Atmel:
      - Sam9x60 support.
   - GPMI:
      - Introduce the GPMI_IS_MXS() macro.
   - Various trivial/spelling/coding style fixes.

  SPI NOR core changes:
   - Print all JEDEC ID bytes on error
   - Fix comment of spi_nor_find_best_erase_type()
   - Add region locking flags for s25fl512s

  SPI NOR controller drivers changes:
   - intel-spi:
      - Avoid crossing 4K address boundary on read/write
      - Add support for Intel Comet Lake SPI serial flash"

* tag 'mtd/for-5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (120 commits)
  mtd: part: fix incorrect format specifier for an unsigned long long
  mtd: lpddr_cmds: Mark expected switch fall-through
  mtd: phram: Mark expected switch fall-throughs
  mtd: cfi_cmdset_0002: Mark expected switch fall-throughs
  mtd: cfi_util: mark expected switch fall-throughs
  MAINTAINERS: MTD Git repository is hosted on kernel.org
  MAINTAINERS: Update jffs2 entry
  mtd: afs: add v2 partition parsing
  mtd: afs: factor the IIS read into partition parser
  mtd: afs: factor footer parsing into the v1 part parsing
  mtd: factor out v1 partition parsing
  mtd: afs: simplify partition detection
  mtd: afs: simplify partition parsing
  mtd: partitions: Add OF support to AFS partitions
  mtd: partitions: Add AFS partitions DT bindings
  mtd: afs: Move AFS partition parser to parsers subdir
  mtd: maps: Make uclinux_ram_map static
  mtd: maps: Allow MTD_PHYSMAP with MTD_RAM
  MAINTAINERS: Add myself as MTD maintainer
  MAINTAINERS: Remove my name from the MTD and NAND entries
  ...

Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt

@@ -15,6 +15,7 @@ Required properties:
 			"atmel,at91sam9g45-ebi"
 			"atmel,at91sam9x5-ebi"
 			"atmel,sama5d3-ebi"
+			"microchip,sam9x60-ebi"
 
 - reg:			Contains offset/length value for EBI memory mapping.
 			This property might contain several entries if the EBI

Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/allwinner,sun4i-a10-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 NAND Controller Device Tree Bindings
+
+allOf:
+  - $ref: "nand-controller.yaml"
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+  "#address-cells": true
+  "#size-cells": true
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-nand
+      - allwinner,sun8i-a23-nand-controller
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: ahb
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rxtx
+
+  pinctrl-names: true
+
+patternProperties:
+  "^pinctrl-[0-9]+$": true
+
+  "^nand@[a-f0-9]+$":
+    properties:
+      reg:
+        maxItems: 1
+        minimum: 0
+        maximum: 7
+
+      nand-ecc-mode: true
+
+      nand-ecc-algo:
+        const: bch
+
+      nand-ecc-step-size:
+        enum: [ 512, 1024 ]
+
+      nand-ecc-strength:
+        maximum: 80
+
+      allwinner,rb:
+        description:
+          Contains the native Ready/Busy IDs.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-array
+          - minItems: 1
+            maxItems: 2
+            items:
+              minimum: 0
+              maximum: 1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+...

Documentation/devicetree/bindings/mtd/atmel-nand.txt

@@ -14,6 +14,7 @@ Required properties:
 	"atmel,at91sam9261-nand-controller"
 	"atmel,at91sam9g45-nand-controller"
 	"atmel,sama5d3-nand-controller"
+	"microchip,sam9x60-nand-controller"
 - ranges: empty ranges property to forward EBI ranges definitions.
 - #address-cells: should be set to 2.
 - #size-cells: should be set to 1.

Documentation/devicetree/bindings/mtd/denali-nand.txt

@@ -7,34 +7,48 @@ Required properties:
       "socionext,uniphier-denali-nand-v5b"  - for Socionext UniPhier (v5b)
   - reg : should contain registers location and length for data and reg.
   - reg-names: Should contain the reg names "nand_data" and "denali_reg"
+  - #address-cells: should be 1. The cell encodes the chip select connection.
+  - #size-cells : should be 0.
   - interrupts : The interrupt number.
   - clocks: should contain phandle of the controller core clock, the bus
     interface clock, and the ECC circuit clock.
   - clock-names: should contain "nand", "nand_x", "ecc"
 
-Optional properties:
-  - nand-ecc-step-size: see nand.txt for details.  If present, the value must be
-      512        for "altr,socfpga-denali-nand"
-      1024       for "socionext,uniphier-denali-nand-v5a"
-      1024       for "socionext,uniphier-denali-nand-v5b"
-  - nand-ecc-strength: see nand.txt for details.  Valid values are:
-      8, 15      for "altr,socfpga-denali-nand"
-      8, 16, 24  for "socionext,uniphier-denali-nand-v5a"
-      8, 16      for "socionext,uniphier-denali-nand-v5b"
-  - nand-ecc-maximize: see nand.txt for details
-
-The device tree may optionally contain sub-nodes describing partitions of the
+Sub-nodes:
+  Sub-nodes represent available NAND chips.
+
+  Required properties:
+    - reg: should contain the bank ID of the controller to which each chip
+      select is connected.
+
+  Optional properties:
+    - nand-ecc-step-size: see nand.txt for details.
+      If present, the value must be
+        512        for "altr,socfpga-denali-nand"
+        1024       for "socionext,uniphier-denali-nand-v5a"
+        1024       for "socionext,uniphier-denali-nand-v5b"
+    - nand-ecc-strength: see nand.txt for details. Valid values are:
+        8, 15      for "altr,socfpga-denali-nand"
+        8, 16, 24  for "socionext,uniphier-denali-nand-v5a"
+        8, 16      for "socionext,uniphier-denali-nand-v5b"
+    - nand-ecc-maximize: see nand.txt for details
+
+The chip nodes may optionally contain sub-nodes describing partitions of the
 address space. See partition.txt for more detail.
 
 Examples:
 
 nand: nand@ff900000 {
 	#address-cells = <1>;
-	#size-cells = <1>;
+	#size-cells = <0>;
 	compatible = "altr,socfpga-denali-nand";
 	reg = <0xff900000 0x20>, <0xffb80000 0x1000>;
 	reg-names = "nand_data", "denali_reg";
 	clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
 	clock-names = "nand", "nand_x", "ecc";
 	interrupts = <0 144 4>;
+
+	nand@0 {
+		reg = <0>;
+	}
 };

Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt

-* Ingenic JZ4780 NAND/BCH
+* Ingenic JZ4780 NAND/ECC
 
 This file documents the device tree bindings for NAND flash devices on the
 JZ4780. NAND devices are connected to the NEMC controller (described in
@@ -6,15 +6,18 @@ memory-controllers/ingenic,jz4780-nemc.txt), and thus NAND device nodes must
 be children of the NEMC node.
 
 Required NAND controller device properties:
-- compatible: Should be set to "ingenic,jz4780-nand".
+- compatible: Should be one of:
+  * ingenic,jz4740-nand
+  * ingenic,jz4725b-nand
+  * ingenic,jz4780-nand
 - reg: For each bank with a NAND chip attached, should specify a bank number,
   an offset of 0 and a size of 0x1000000 (i.e. the whole NEMC bank).
 
 Optional NAND controller device properties:
-- ingenic,bch-controller: To make use of the hardware BCH controller, this
-  property must contain a phandle for the BCH controller node. The required
+- ecc-engine: To make use of the hardware ECC controller, this
+  property must contain a phandle for the ECC controller node. The required
   properties for this node are described below. If this is not specified,
-  software BCH will be used instead.
+  software ECC will be used instead.
 
 Optional children nodes:
 - Individual NAND chips are children of the NAND controller node.
@@ -45,7 +48,7 @@ nemc: nemc@13410000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ingenic,bch-controller = <&bch>;
+		ecc-engine = <&bch>;
 
 		nand@1 {
 			reg = <1>;
@@ -67,14 +70,17 @@ nemc: nemc@13410000 {
 	};
 };
 
-The BCH controller is a separate SoC component used for error correction on
+The ECC controller is a separate SoC component used for error correction on
 NAND devices. The following is a description of the device properties for a
-BCH controller.
-
-Required BCH properties:
-- compatible: Should be set to "ingenic,jz4780-bch".
-- reg: Should specify the BCH controller registers location and length.
-- clocks: Clock for the BCH controller.
+ECC controller.
+
+Required ECC properties:
+- compatible: Should be one of:
+  * ingenic,jz4740-ecc
+  * ingenic,jz4725b-bch
+  * ingenic,jz4780-bch
+- reg: Should specify the ECC controller registers location and length.
+- clocks: Clock for the ECC controller.
 
 Example:
 

Documentation/devicetree/bindings/mtd/mtd-physmap.txt

@@ -96,3 +96,19 @@ An example using SRAM:
 		bank-width = <2>;
 	};
 
+An example using gpio-addrs
+
+	flash@20000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash", "jedec-flash";
+		reg = <0x20000000 0x02000000>;
+		ranges = <0 0x00000000 0x02000000
+		          1 0x02000000 0x02000000>;
+		bank-width = <2>;
+		addr-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		partition@0 {
+			label = "test-part1";
+			reg = <0 0x04000000>;
+		};
+	};

Documentation/devicetree/bindings/mtd/nand-controller.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/nand-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAND Chip and NAND Controller Generic Binding
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+  - Richard Weinberger <richard@nod.at>
+
+description: |
+  The NAND controller should be represented with its own DT node, and
+  all NAND chips attached to this controller should be defined as
+  children nodes of the NAND controller. This representation should be
+  enforced even for simple controllers supporting only one chip.
+
+  The ECC strength and ECC step size properties define the user
+  desires in terms of correction capability of a controller. Together,
+  they request the ECC engine to correct {strength} bit errors per
+  {size} bytes.
+
+  The interpretation of these parameters is implementation-defined, so
+  not all implementations must support all possible
+  combinations. However, implementations are encouraged to further
+  specify the value(s) they support.
+
+properties:
+  $nodename:
+    pattern: "^nand-controller(@.*)?"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  ranges: true
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    properties:
+      reg:
+        description:
+          Contains the native Ready/Busy IDs.
+
+      nand-ecc-mode:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/string
+          - enum: [ none, soft, hw, hw_syndrome, hw_oob_first, on-die ]
+        description:
+          Desired ECC engine, either hardware (most of the time
+          embedded in the NAND controller) or software correction
+          (Linux will handle the calculations). soft_bch is deprecated
+          and should be replaced by soft and nand-ecc-algo.
+
+      nand-ecc-algo:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/string
+          - enum: [ hamming, bch, rs ]
+        description:
+          Desired ECC algorithm.
+
+      nand-bus-width:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+          - enum: [ 8, 16 ]
+          - default: 8
+        description:
+          Bus width to the NAND chip
+
+      nand-on-flash-bbt:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          With this property, the OS will search the device for a Bad
+          Block Table (BBT). If not found, it will create one, reserve
+          a few blocks at the end of the device to store it and update
+          it as the device ages. Otherwise, the out-of-band area of a
+          few pages of all the blocks will be scanned at boot time to
+          find Bad Block Markers (BBM). These markers will help to
+          build a volatile BBT in RAM.
+
+      nand-ecc-strength:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+          - minimum: 1
+        description:
+          Maximum number of bits that can be corrected per ECC step.
+
+      nand-ecc-step-size:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+          - minimum: 1
+        description:
+          Number of data bytes covered by a single ECC step.
+
+      nand-ecc-maximize:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Whether or not the ECC strength should be maximized. The
+          maximum ECC strength is both controller and chip
+          dependent. The ECC engine has to select the ECC config
+          providing the best strength and taking the OOB area size
+          constraint into account. This is particularly useful when
+          only the in-band area is used by the upper layers, and you
+          want to make your NAND as reliable as possible.
+
+      nand-is-boot-medium:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Whether or not the NAND chip is a boot medium. Drivers might
+          use this information to select ECC algorithms supported by
+          the boot ROM or similar restrictions.
+
+      nand-rb:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description:
+          Contains the native Ready/Busy IDs.
+
+    required:
+      - reg
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    nand-controller {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      /* controller specific properties */
+
+      nand@0 {
+        reg = <0>;
+        nand-ecc-mode = "soft";
+        nand-ecc-algo = "bch";
+
+        /* controller specific properties */
+      };
+    };

Documentation/devicetree/bindings/mtd/nand.txt

-* NAND chip and NAND controller generic binding
-
-NAND controller/NAND chip representation:
-
-The NAND controller should be represented with its own DT node, and all
-NAND chips attached to this controller should be defined as children nodes
-of the NAND controller. This representation should be enforced even for
-simple controllers supporting only one chip.
-
-Mandatory NAND controller properties:
-- #address-cells: depends on your controller. Should at least be 1 to
-		  encode the CS line id.
-- #size-cells: depends on your controller. Put zero unless you need a
-	       mapping between CS lines and dedicated memory regions
-
-Optional NAND controller properties
-- ranges: only needed if you need to define a mapping between CS lines and
-	  memory regions
-
-Optional NAND chip properties:
-
-- nand-ecc-mode : String, operation mode of the NAND ecc mode.
-		  Supported values are: "none", "soft", "hw", "hw_syndrome",
-		  "hw_oob_first", "on-die".
-		  Deprecated values:
-		  "soft_bch": use "soft" and nand-ecc-algo instead
-- nand-ecc-algo: string, algorithm of NAND ECC.
-		 Valid values are: "hamming", "bch", "rs".
-- nand-bus-width : 8 or 16 bus width if not present 8
-- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
-
-- nand-ecc-strength: integer representing the number of bits to correct
-		     per ECC step.
-
-- nand-ecc-step-size: integer representing the number of data bytes
-		      that are covered by a single ECC step.
-
-- nand-ecc-maximize: boolean used to specify that you want to maximize ECC
-		     strength. The maximum ECC strength is both controller and
-		     chip dependent. The controller side has to select the ECC
-		     config providing the best strength and taking the OOB area
-		     size constraint into account.
-		     This is particularly useful when only the in-band area is
-		     used by the upper layers, and you want to make your NAND
-		     as reliable as possible.
-- nand-is-boot-medium: Whether the NAND chip is a boot medium. Drivers might use
-		       this information to select ECC algorithms supported by
-		       the boot ROM or similar restrictions.
-
-- nand-rb: shall contain the native Ready/Busy ids.
-
-The ECC strength and ECC step size properties define the correction capability
-of a controller. Together, they say a controller can correct "{strength} bit
-errors per {size} bytes".
-
-The interpretation of these parameters is implementation-defined, so not all
-implementations must support all possible combinations. However, implementations
-are encouraged to further specify the value(s) they support.
-
-Example:
-
-	nand-controller {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* controller specific properties */
-
-		nand@0 {
-			reg = <0>;
-			nand-ecc-mode = "soft";
-			nand-ecc-algo = "bch";
-
-			/* controller specific properties */
-		};
-	};

Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.txt

+ARM AFS - ARM Firmware Suite Partitions
+=======================================
+
+The ARM Firmware Suite is a flash partitioning system found on the
+ARM reference designs: Integrator AP, Integrator CP, Versatile AB,
+Versatile PB, the RealView family, Versatile Express and Juno.
+
+Required properties:
+- compatible : (required) must be "arm,arm-firmware-suite"
+
+Example:
+
+flash@0 {
+	partitions {
+		compatible = "arm,arm-firmware-suite";
+	};
+};

Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-cfe-nor-partitions.txt

+Broadcom BCM963XX CFE Loader NOR Flash Partitions
+=================================================
+
+Most Broadcom BCM63XX SoC based devices follow the Broadcom reference layout for
+NOR. The first erase block used for the CFE bootloader, the last for an
+NVRAM partition, and the remainder in-between for one to two firmware partitions
+at fixed offsets. A valid firmware partition is identified by the ImageTag
+header found at beginning of the second erase block, containing the rootfs and
+kernel offsets and sizes within the firmware partition.
+
+Required properties:
+- compatible : must be "brcm,bcm963xx-cfe-nor-partitions"
+
+Example:
+
+flash@1fc00000 {
+	compatible = "cfi-flash";
+	reg = <0x1fc00000 0x400000>;
+	bank-width = <2>;
+
+	partitions {
+		compatible = "brcm,bcm963xx-cfe-nor-partitions";
+	};
+};

Documentation/devicetree/bindings/mtd/partitions/brcm,bcm963xx-imagetag.txt

+Broadcom BCM963XX ImageTag Partition Container
+==============================================
+
+Some Broadcom BCM63XX SoC based devices contain additional, non discoverable
+partitions or non standard bootloader partition sizes. For these a mixed layout
+needs to be used with an explicit firmware partition.
+
+The BCM963XX ImageTag is a simple firmware header describing the offsets and
+sizes of the rootfs and kernel parts contained in the firmware.
+
+Required properties:
+- compatible : must be "brcm,bcm963xx-imagetag"
+
+Example:
+
+flash@1e000000 {
+	compatible = "cfi-flash";
+	reg = <0x1e000000 0x2000000>;
+	bank-width = <2>;
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cfe@0 {
+			reg = <0x0 0x10000>;
+			read-only;
+		};
+
+		firmware@10000 {
+			reg = <0x10000 0x7d0000>;
+			compatible = "brcm,bcm963xx-imagetag";
+		};
+
+		caldata@7e0000 {
+			reg = <0x7e0000 0x10000>;
+			read-only;
+		};
+
+		nvram@7f0000 {
+			reg = <0x7f0000 0x10000>;
+		};
+	};
+};

Documentation/devicetree/bindings/mtd/sunxi-nand.txt

-Allwinner NAND Flash Controller (NFC)
-
-Required properties:
-- compatible : "allwinner,sun4i-a10-nand".
-- reg : shall contain registers location and length for data and reg.
-- interrupts : shall define the nand controller interrupt.
-- #address-cells: shall be set to 1. Encode the nand CS.
-- #size-cells : shall be set to 0.
-- clocks : shall reference nand controller clocks.
-- clock-names : nand controller internal clock names. Shall contain :
-    * "ahb" : AHB gating clock
-    * "mod" : nand controller clock
-
-Optional properties:
-- dmas : shall reference DMA channel associated to the NAND controller.
-- dma-names : shall be "rxtx".
-
-Optional children nodes:
-Children nodes represent the available nand chips.
-
-Optional properties:
-- reset : phandle + reset specifier pair
-- reset-names : must contain "ahb"
-- allwinner,rb : shall contain the native Ready/Busy ids.
-- nand-ecc-mode : one of the supported ECC modes ("hw", "soft", "soft_bch" or
-		  "none")
-
-see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings.
-
-
-Examples:
-nfc: nand@1c03000 {
-	compatible = "allwinner,sun4i-a10-nand";
-	reg = <0x01c03000 0x1000>;
-	interrupts = <0 37 1>;
-	clocks = <&ahb_gates 13>, <&nand_clk>;
-	clock-names = "ahb", "mod";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
-
-	nand@0 {
-		reg = <0>;
-		allwinner,rb = <0>;
-		nand-ecc-mode = "soft_bch";
-	};
-};

MAINTAINERS

@@ -8418,9 +8418,11 @@ F:	drivers/net/ethernet/jme.*
 
 JOURNALLING FLASH FILE SYSTEM V2 (JFFS2)
 M:	David Woodhouse <dwmw2@infradead.org>
+M:	Richard Weinberger <richard@nod.at>
 L:	linux-mtd@lists.infradead.org
 W:	http://www.linux-mtd.infradead.org/doc/jffs2.html
-S:	Maintained
+T:	git git://git.infradead.org/ubifs-2.6.git
+S:	Odd Fixes
 F:	fs/jffs2/
 F:	include/uapi/linux/jffs2.h
 
@@ -10114,14 +10116,15 @@ F:	mm/
 MEMORY TECHNOLOGY DEVICES (MTD)
 M:	David Woodhouse <dwmw2@infradead.org>
 M:	Brian Norris <computersforpeace@gmail.com>
-M:	Boris Brezillon <bbrezillon@kernel.org>
 M:	Marek Vasut <marek.vasut@gmail.com>
+M:	Miquel Raynal <miquel.raynal@bootlin.com>
 M:	Richard Weinberger <richard@nod.at>
+M:	Vignesh Raghavendra <vigneshr@ti.com>
 L:	linux-mtd@lists.infradead.org
 W:	http://www.linux-mtd.infradead.org/
 Q:	http://patchwork.ozlabs.org/project/linux-mtd/list/
-T:	git git://git.infradead.org/linux-mtd.git master
-T:	git git://git.infradead.org/linux-mtd.git mtd/next
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/fixes
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next
 S:	Maintained
 F:	Documentation/devicetree/bindings/mtd/
 F:	drivers/mtd/
@@ -10730,14 +10733,12 @@ S:	Supported
 F:	drivers/net/ethernet/myricom/myri10ge/
 
 NAND FLASH SUBSYSTEM
-M:	Boris Brezillon <bbrezillon@kernel.org>
 M:	Miquel Raynal <miquel.raynal@bootlin.com>
 R:	Richard Weinberger <richard@nod.at>
 L:	linux-mtd@lists.infradead.org
 W:	http://www.linux-mtd.infradead.org/
 Q:	http://patchwork.ozlabs.org/project/linux-mtd/list/
-T:	git git://git.infradead.org/linux-mtd.git nand/fixes
-T:	git git://git.infradead.org/linux-mtd.git nand/next
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next
 S:	Maintained
 F:	drivers/mtd/nand/
 F:	include/linux/mtd/*nand*.h
@@ -14751,8 +14752,7 @@ M:	Tudor Ambarus <tudor.ambarus@microchip.com>
 L:	linux-mtd@lists.infradead.org
 W:	http://www.linux-mtd.infradead.org/
 Q:	http://patchwork.ozlabs.org/project/linux-mtd/list/
-T:	git git://git.infradead.org/linux-mtd.git spi-nor/fixes
-T:	git git://git.infradead.org/linux-mtd.git spi-nor/next
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git spi-nor/next
 S:	Maintained
 F:	drivers/mtd/spi-nor/
 F:	include/linux/mtd/spi-nor.h

arch/arm/configs/at91_dt_defconfig

@@ -55,7 +55,7 @@ CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_GLUEBI=y

arch/arm/configs/clps711x_defconfig

@@ -35,7 +35,7 @@ CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_GPIO=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_CADENCE is not set

arch/arm/configs/cm_x2xx_defconfig

@@ -58,7 +58,7 @@ CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PXA2XX=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_GPIO=m
 CONFIG_MTD_NAND_CM_X270=y
 CONFIG_MTD_NAND_PLATFORM=y

arch/arm/configs/cm_x300_defconfig

@@ -48,7 +48,7 @@ CONFIG_LIB80211=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_MARVELL=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y

arch/arm/configs/colibri_pxa270_defconfig

@@ -64,7 +64,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PXA2XX=y
 CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_DISKONCHIP=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000

arch/arm/configs/corgi_defconfig

@@ -87,7 +87,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_ROM=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_SHARPSL=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_SD=y

arch/arm/configs/davinci_all_defconfig

@@ -74,7 +74,7 @@ CONFIG_MTD_CFI_INTELEXT=m
 CONFIG_MTD_CFI_AMDSTD=m
 CONFIG_MTD_PHYSMAP=m
 CONFIG_MTD_M25P80=m
-CONFIG_MTD_NAND=m
+CONFIG_MTD_RAW_NAND=m
 CONFIG_MTD_NAND_DAVINCI=m
 CONFIG_MTD_SPI_NOR=m
 CONFIG_MTD_UBI=m

arch/arm/configs/em_x270_defconfig

@@ -54,7 +54,7 @@ CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PXA2XX=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y

arch/arm/configs/ep93xx_defconfig

@@ -63,7 +63,7 @@ CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_ROM=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_SCSI=y

arch/arm/configs/eseries_pxa_defconfig

@@ -43,7 +43,7 @@ CONFIG_MAC80211_RC_PID=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_MTD=m
-CONFIG_MTD_NAND=m
+CONFIG_MTD_RAW_NAND=m
 CONFIG_MTD_NAND_TMIO=m
 CONFIG_BLK_DEV_LOOP=m
 # CONFIG_SCSI_PROC_FS is not set

arch/arm/configs/imx_v4_v5_defconfig

@@ -61,7 +61,7 @@ CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_CFI_I2 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_UBI=y
 CONFIG_EEPROM_AT24=y

arch/arm/configs/imx_v6_v7_defconfig

@@ -110,7 +110,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_SST25L=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_GPMI_NAND=y
 CONFIG_MTD_NAND_VF610_NFC=y
 CONFIG_MTD_NAND_MXC=y

arch/arm/configs/ixp4xx_defconfig

@@ -112,7 +112,7 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_IXP4XX=y
-CONFIG_MTD_NAND=m
+CONFIG_MTD_RAW_NAND=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192

arch/arm/configs/keystone_defconfig

@@ -124,7 +124,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_PLATRAM=y
 CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_DAVINCI=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y

arch/arm/configs/lpc32xx_defconfig

@@ -47,7 +47,7 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_SLC_LPC32XX=y
 CONFIG_MTD_NAND_MLC_LPC32XX=y
 CONFIG_MTD_UBI=y

arch/arm/configs/mini2440_defconfig

@@ -92,7 +92,7 @@ CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_S3C2410=y
 CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_MTD_LPDDR=y

arch/arm/configs/mmp2_defconfig

@@ -28,7 +28,7 @@ CONFIG_IP_PNP=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_GENERIC=y
 # CONFIG_BLK_DEV is not set

arch/arm/configs/multi_v4t_defconfig

@@ -38,7 +38,7 @@ CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_GPIO=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set

arch/arm/configs/multi_v5_defconfig

@@ -87,7 +87,7 @@ CONFIG_MTD_CFI_GEOMETRY=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_ORION=y
 CONFIG_MTD_SPI_NOR=y

arch/arm/configs/multi_v7_defconfig

@@ -184,7 +184,7 @@ CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_DENALI_DT=y
 CONFIG_MTD_NAND_OMAP2=y
 CONFIG_MTD_NAND_OMAP_BCH=y

arch/arm/configs/mv78xx0_defconfig

@@ -47,7 +47,7 @@ CONFIG_MTD_CFI_GEOMETRY=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_ORION=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_SCSI_PROC_FS is not set

arch/arm/configs/mvebu_v5_defconfig

@@ -77,7 +77,7 @@ CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_ORION=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_BLK_DEV_LOOP=y

arch/arm/configs/mvebu_v7_defconfig

@@ -52,7 +52,7 @@ CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_MARVELL=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y

arch/arm/configs/mxs_defconfig

@@ -50,7 +50,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_SST25L=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_GPMI_NAND=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y

arch/arm/configs/nhk8815_defconfig

@@ -53,8 +53,8 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_FSMC=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y

arch/arm/configs/omap1_defconfig

@@ -89,7 +89,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2

arch/arm/configs/omap2plus_defconfig

@@ -143,8 +143,8 @@ CONFIG_MTD_M25P80=m
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_NAND_ECC_SW_BCH=y
 CONFIG_MTD_NAND_OMAP2=y
 CONFIG_MTD_NAND_OMAP_BCH=y
 CONFIG_MTD_SPI_NOR=m

arch/arm/configs/orion5x_defconfig

@@ -70,7 +70,7 @@ CONFIG_MTD_CFI_GEOMETRY=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_MTD_NAND_ORION=y
 CONFIG_BLK_DEV_LOOP=y

arch/arm/configs/oxnas_v6_defconfig

@@ -50,7 +50,7 @@ CONFIG_SIMPLE_PM_BUS=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_OXNAS=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y

arch/arm/configs/pxa3xx_defconfig

@@ -31,7 +31,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_MARVELL=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y

arch/arm/configs/pxa_defconfig

@@ -185,8 +185,8 @@ CONFIG_MTD_PXA2XX=m
 CONFIG_MTD_M25P80=m
 CONFIG_MTD_BLOCK2MTD=y
 CONFIG_MTD_DOCG3=m
-CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_RAW_NAND=m
+CONFIG_MTD_NAND_ECC_SW_BCH=y
 CONFIG_MTD_NAND_GPIO=m
 CONFIG_MTD_NAND_DISKONCHIP=m
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y

arch/arm/configs/qcom_defconfig

@@ -57,7 +57,7 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_QCOM=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_BLK_DEV_LOOP=y

arch/arm/configs/s3c2410_defconfig

@@ -192,7 +192,7 @@ CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_ROM=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_S3C2410=y
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=m

arch/arm/configs/s3c6400_defconfig

@@ -23,7 +23,7 @@ CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x5100
 CONFIG_VFP=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_S3C2410=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y

arch/arm/configs/sama5_defconfig

@@ -66,7 +66,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y

arch/arm/configs/socfpga_defconfig

@@ -51,7 +51,7 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_DENALI_DT=y
 CONFIG_MTD_SPI_NOR=y
 # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set

arch/arm/configs/spear13xx_defconfig

@@ -32,7 +32,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_FSMC=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384

arch/arm/configs/spear3xx_defconfig

@@ -17,7 +17,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_FSMC=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384

arch/arm/configs/spear6xx_defconfig

@@ -14,7 +14,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_FSMC=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384

arch/arm/configs/spitz_defconfig

@@ -84,7 +84,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_ROM=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_SHARPSL=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_SD=y

arch/arm/configs/tango4_defconfig

@@ -39,7 +39,7 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_TESTS=m
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_TANGO=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_SCSI=y

arch/arm/configs/trizeps4_defconfig

@@ -76,7 +76,7 @@ CONFIG_MTD_DOC2001PLUS=y
 CONFIG_MTD_DOCPROBE_ADVANCED=y
 CONFIG_MTD_DOCPROBE_ADDRESS=0x4000000
 CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_DISKONCHIP=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000

arch/arm/configs/u300_defconfig

@@ -26,7 +26,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_FSMC=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y

arch/arm64/configs/defconfig

@@ -206,7 +206,7 @@ CONFIG_SIMPLE_PM_BUS=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_DENALI_DT=y
 CONFIG_MTD_NAND_MARVELL=y
 CONFIG_MTD_NAND_QCOM=y

arch/mips/configs/bcm47xx_defconfig

@@ -41,7 +41,7 @@ CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_BCM47XXSFLASH=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_BCM47XXNFLASH=y
 CONFIG_NETDEVICES=y
 CONFIG_B44=y

arch/mips/configs/ci20_defconfig

@@ -51,7 +51,7 @@ CONFIG_DEVTMPFS=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=32
 CONFIG_MTD=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_JZ4780=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_FASTMAP=y

arch/mips/configs/db1xxx_defconfig

@@ -95,8 +95,8 @@ CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_SST25L=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_NAND_ECC_SW_BCH=y
 CONFIG_MTD_NAND_AU1550=y
 CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_MTD_SPI_NOR=y

arch/mips/configs/generic/board-ni169445.config

@@ -15,9 +15,9 @@ CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CMDLINE_PARTS=y
 
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_BCH=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING=y
+CONFIG_MTD_NAND_ECC_SW_BCH=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_GPIO=y
 CONFIG_MTD_NAND_IDS=y
 

arch/mips/configs/generic/board-ocelot.config

@@ -10,7 +10,7 @@ CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y

arch/mips/configs/loongson1b_defconfig

@@ -41,7 +41,7 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_SCSI=m

arch/mips/configs/loongson1c_defconfig

@@ -42,7 +42,7 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_SCSI=m

arch/mips/configs/qi_lb60_defconfig

@@ -44,7 +44,7 @@ CONFIG_TCP_CONG_WESTWOOD=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_JZ4740=y
 CONFIG_MTD_UBI=y
 CONFIG_NETDEVICES=y

arch/mips/configs/rb532_defconfig

@@ -109,7 +109,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_ATA=y
 # CONFIG_ATA_VERBOSE_ERROR is not set

arch/mips/configs/rbtx49xx_defconfig

@@ -39,7 +39,7 @@ CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_RBTX4939=y
-CONFIG_MTD_NAND=m
+CONFIG_MTD_RAW_NAND=m
 CONFIG_MTD_NAND_TXX9NDFMC=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y

arch/mips/configs/xway_defconfig

@@ -81,7 +81,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_LANTIQ=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_XWAY=y
 CONFIG_EEPROM_93CX6=m
 CONFIG_SCSI=y

arch/powerpc/configs/40x/kilauea_defconfig

@@ -33,7 +33,7 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_NDFC=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000

arch/powerpc/configs/40x/obs600_defconfig

@@ -33,7 +33,7 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_NDFC=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000

arch/powerpc/configs/44x/canyonlands_defconfig

@@ -32,7 +32,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_NDFC=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000

arch/powerpc/configs/44x/eiger_defconfig

@@ -33,7 +33,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_NDFC=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000

arch/powerpc/configs/44x/sequoia_defconfig

@@ -33,7 +33,7 @@ CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_NDFC=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=35000

arch/powerpc/configs/44x/warp_defconfig

@@ -34,7 +34,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_NDFC=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_RAM=y

arch/powerpc/configs/83xx/mpc8313_rdb_defconfig

@@ -31,7 +31,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y

arch/powerpc/configs/83xx/mpc8315_rdb_defconfig

@@ -31,7 +31,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=32768

arch/powerpc/configs/85xx-hw.config

@@ -71,7 +71,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PLATRAM=y

arch/powerpc/configs/85xx/ge_imp3a_defconfig

@@ -73,7 +73,7 @@ CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m

arch/powerpc/configs/85xx/socrates_defconfig

@@ -31,7 +31,7 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_SOCRATES=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y

arch/powerpc/configs/85xx/tqm8548_defconfig

@@ -35,8 +35,8 @@ CONFIG_MTD=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_FSL_UPM=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y

arch/powerpc/configs/85xx/xes_mpc85xx_defconfig

@@ -65,7 +65,7 @@ CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_UPM=y
 CONFIG_BLK_DEV_LOOP=y

arch/powerpc/configs/86xx-hw.config

@@ -47,7 +47,7 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_TULIP=y

arch/powerpc/configs/mpc512x_defconfig

@@ -46,7 +46,7 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_ROM=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_MPC5121_NFC=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_RAM=y

arch/powerpc/configs/mpc83xx_defconfig

@@ -46,7 +46,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y

arch/powerpc/configs/pasemi_defconfig

@@ -51,7 +51,7 @@ CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_SLRAM=y
 CONFIG_MTD_PHRAM=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_PASEMI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y

arch/powerpc/configs/ppc44x_defconfig

@@ -44,7 +44,7 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=m
+CONFIG_MTD_RAW_NAND=m
 CONFIG_MTD_NAND_NDFC=m
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_GLUEBI=m

arch/sh/configs/ap325rxa_defconfig

@@ -35,7 +35,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_SH_FLCTL=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_RAM=y

arch/sh/configs/ecovec24_defconfig

@@ -38,7 +38,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4

arch/sh/configs/migor_defconfig

@@ -34,7 +34,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_SCSI=y

arch/sh/configs/sdk7786_defconfig

@@ -108,7 +108,7 @@ CONFIG_MTD_ROM=m
 CONFIG_MTD_ABSENT=m
 CONFIG_MTD_PLATRAM=y
 CONFIG_MTD_PHRAM=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_MTD_NAND_SH_FLCTL=m
 CONFIG_MTD_UBI=y

arch/sh/configs/se7724_defconfig

@@ -37,7 +37,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4

arch/sh/configs/titan_defconfig

@@ -155,7 +155,7 @@ CONFIG_INFTL=m
 CONFIG_RFD_FTL=m
 CONFIG_MTD_CFI=m
 CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_NAND=m
+CONFIG_MTD_RAW_NAND=m
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_RAM=y

drivers/memory/atmel-ebi.c

@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/of_device.h>
 #include <linux/regmap.h>
+#include <soc/at91/atmel-sfr.h>
 
 struct atmel_ebi_dev_config {
 	int cs;
@@ -36,6 +37,7 @@ struct atmel_ebi_dev {
 struct atmel_ebi_caps {
 	unsigned int available_cs;
 	unsigned int ebi_csa_offs;
+	const char *regmap_name;
 	void (*get_config)(struct atmel_ebi_dev *ebid,
 			   struct atmel_ebi_dev_config *conf);
 	int (*xlate_config)(struct atmel_ebi_dev *ebid,
@@ -47,7 +49,7 @@ struct atmel_ebi_caps {
 
 struct atmel_ebi {
 	struct clk *clk;
-	struct regmap *matrix;
+	struct regmap *regmap;
 	struct  {
 		struct regmap *regmap;
 		struct clk *clk;
@@ -357,7 +359,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
 		 * one "atmel,smc-" property is present.
 		 */
 		if (ebi->caps->ebi_csa_offs && apply)
-			regmap_update_bits(ebi->matrix,
+			regmap_update_bits(ebi->regmap,
 					   ebi->caps->ebi_csa_offs,
 					   BIT(cs), 0);
 
@@ -372,6 +374,7 @@ static int atmel_ebi_dev_setup(struct atmel_ebi *ebi, struct device_node *np,
 static const struct atmel_ebi_caps at91sam9260_ebi_caps = {
 	.available_cs = 0xff,
 	.ebi_csa_offs = AT91SAM9260_MATRIX_EBICSA,
+	.regmap_name = "atmel,matrix",
 	.get_config = at91sam9_ebi_get_config,
 	.xlate_config = atmel_ebi_xslate_smc_config,
 	.apply_config = at91sam9_ebi_apply_config,
@@ -380,6 +383,7 @@ static const struct atmel_ebi_caps at91sam9260_ebi_caps = {
 static const struct atmel_ebi_caps at91sam9261_ebi_caps = {
 	.available_cs = 0xff,
 	.ebi_csa_offs = AT91SAM9261_MATRIX_EBICSA,
+	.regmap_name = "atmel,matrix",
 	.get_config = at91sam9_ebi_get_config,
 	.xlate_config = atmel_ebi_xslate_smc_config,
 	.apply_config = at91sam9_ebi_apply_config,
@@ -388,6 +392,7 @@ static const struct atmel_ebi_caps at91sam9261_ebi_caps = {
 static const struct atmel_ebi_caps at91sam9263_ebi0_caps = {
 	.available_cs = 0x3f,
 	.ebi_csa_offs = AT91SAM9263_MATRIX_EBI0CSA,
+	.regmap_name = "atmel,matrix",
 	.get_config = at91sam9_ebi_get_config,
 	.xlate_config = atmel_ebi_xslate_smc_config,
 	.apply_config = at91sam9_ebi_apply_config,
@@ -396,6 +401,7 @@ static const struct atmel_ebi_caps at91sam9263_ebi0_caps = {
 static const struct atmel_ebi_caps at91sam9263_ebi1_caps = {
 	.available_cs = 0x7,
 	.ebi_csa_offs = AT91SAM9263_MATRIX_EBI1CSA,
+	.regmap_name = "atmel,matrix",
 	.get_config = at91sam9_ebi_get_config,
 	.xlate_config = atmel_ebi_xslate_smc_config,
 	.apply_config = at91sam9_ebi_apply_config,
@@ -404,6 +410,7 @@ static const struct atmel_ebi_caps at91sam9263_ebi1_caps = {
 static const struct atmel_ebi_caps at91sam9rl_ebi_caps = {
 	.available_cs = 0x3f,
 	.ebi_csa_offs = AT91SAM9RL_MATRIX_EBICSA,
+	.regmap_name = "atmel,matrix",
 	.get_config = at91sam9_ebi_get_config,
 	.xlate_config = atmel_ebi_xslate_smc_config,
 	.apply_config = at91sam9_ebi_apply_config,
@@ -412,6 +419,7 @@ static const struct atmel_ebi_caps at91sam9rl_ebi_caps = {
 static const struct atmel_ebi_caps at91sam9g45_ebi_caps = {
 	.available_cs = 0x3f,
 	.ebi_csa_offs = AT91SAM9G45_MATRIX_EBICSA,
+	.regmap_name = "atmel,matrix",
 	.get_config = at91sam9_ebi_get_config,
 	.xlate_config = atmel_ebi_xslate_smc_config,
 	.apply_config = at91sam9_ebi_apply_config,
@@ -420,6 +428,7 @@ static const struct atmel_ebi_caps at91sam9g45_ebi_caps = {
 static const struct atmel_ebi_caps at91sam9x5_ebi_caps = {
 	.available_cs = 0x3f,
 	.ebi_csa_offs = AT91SAM9X5_MATRIX_EBICSA,
+	.regmap_name = "atmel,matrix",
 	.get_config = at91sam9_ebi_get_config,
 	.xlate_config = atmel_ebi_xslate_smc_config,
 	.apply_config = at91sam9_ebi_apply_config,
@@ -432,6 +441,15 @@ static const struct atmel_ebi_caps sama5d3_ebi_caps = {
 	.apply_config = sama5_ebi_apply_config,
 };
 
+static const struct atmel_ebi_caps sam9x60_ebi_caps = {
+	.available_cs = 0x3f,
+	.ebi_csa_offs = AT91_SFR_CCFG_EBICSA,
+	.regmap_name = "microchip,sfr",
+	.get_config = at91sam9_ebi_get_config,
+	.xlate_config = atmel_ebi_xslate_smc_config,
+	.apply_config = at91sam9_ebi_apply_config,
+};
+
 static const struct of_device_id atmel_ebi_id_table[] = {
 	{
 		.compatible = "atmel,at91sam9260-ebi",
@@ -465,6 +483,10 @@ static const struct of_device_id atmel_ebi_id_table[] = {
 		.compatible = "atmel,sama5d3-ebi",
 		.data = &sama5d3_ebi_caps,
 	},
+	{
+		.compatible = "microchip,sam9x60-ebi",
+		.data = &sam9x60_ebi_caps,
+	},
 	{ /* sentinel */ }
 };
 
@@ -543,13 +565,14 @@ static int atmel_ebi_probe(struct platform_device *pdev)
 
 	/*
 	 * The sama5d3 does not provide an EBICSA register and thus does need
-	 * to access the matrix registers.
+	 * to access it.
 	 */
 	if (ebi->caps->ebi_csa_offs) {
-		ebi->matrix =
-			syscon_regmap_lookup_by_phandle(np, "atmel,matrix");
-		if (IS_ERR(ebi->matrix))
-			return PTR_ERR(ebi->matrix);
+		ebi->regmap =
+			syscon_regmap_lookup_by_phandle(np,
+							ebi->caps->regmap_name);
+		if (IS_ERR(ebi->regmap))
+			return PTR_ERR(ebi->regmap);
 	}
 
 	ret = of_property_read_u32(np, "#address-cells", &val);

drivers/mtd/Kconfig

@@ -60,22 +60,6 @@ config MTD_CMDLINE_PARTS
 
 	  If unsure, say 'N'.
 
-config MTD_AFS_PARTS
-	tristate "ARM Firmware Suite partition parsing"
-	depends on (ARM || ARM64)
-	help
-	  The ARM Firmware Suite allows the user to divide flash devices into
-	  multiple 'images'. Each such image has a header containing its name
-	  and offset/size etc.
-
-	  If you need code which can detect and parse these tables, and
-	  register MTD 'partitions' corresponding to each image detected,
-	  enable this option.
-
-	  You will still need the parsing functions to be called by the driver
-	  for your particular device. It won't happen automatically. The
-	  'physmap' map driver (CONFIG_MTD_PHYSMAP) does this, for example.
-
 config MTD_OF_PARTS
 	tristate "OpenFirmware partitioning information support"
 	default y
@@ -94,6 +78,7 @@ config MTD_BCM63XX_PARTS
 	tristate "BCM63XX CFE partitioning support"
 	depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
 	select CRC32
+	select MTD_PARSER_IMAGETAG
 	help
 	  This provides partition parsing for BCM63xx devices with CFE
 	  bootloaders.
@@ -230,12 +215,11 @@ config SSFDC
 	  This enables read only access to SmartMedia formatted NAND
 	  flash. You can mount it with FAT file system.
 
-
 config SM_FTL
 	tristate "SmartMedia/xD new translation layer"
 	depends on BLOCK
 	select MTD_BLKDEVS
-	select MTD_NAND_ECC
+	select MTD_NAND_ECC_SW_HAMMING
 	help
 	  This enables EXPERIMENTAL R/W support for SmartMedia/xD
 	  FTL (Flash translation layer).

drivers/mtd/Makefile

@@ -9,7 +9,6 @@ mtd-y				:= mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o mtdchar.o
 
 obj-$(CONFIG_MTD_OF_PARTS)	+= ofpart.o
 obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
-obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
 obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
 obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
 obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o

drivers/mtd/bcm63xxpart.c

@@ -34,6 +34,7 @@
 #include <linux/vmalloc.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/of.h>
 
 #define BCM963XX_CFE_BLOCK_SIZE		SZ_64K	/* always at least 64KiB */
 
@@ -93,51 +94,19 @@ static int bcm63xx_read_nvram(struct mtd_info *master,
 	return 0;
 }
 
-static int bcm63xx_read_image_tag(struct mtd_info *master, const char *name,
-	loff_t tag_offset, struct bcm_tag *buf)
-{
-	int ret;
-	size_t retlen;
-	u32 computed_crc;
-
-	ret = mtd_read(master, tag_offset, sizeof(*buf), &retlen, (void *)buf);
-	if (ret)
-		return ret;
-
-	if (retlen != sizeof(*buf))
-		return -EIO;
-
-	computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf,
-				offsetof(struct bcm_tag, header_crc));
-	if (computed_crc == buf->header_crc) {
-		STR_NULL_TERMINATE(buf->board_id);
-		STR_NULL_TERMINATE(buf->tag_version);
-
-		pr_info("%s: CFE image tag found at 0x%llx with version %s, board type %s\n",
-			name, tag_offset, buf->tag_version, buf->board_id);
-
-		return 0;
-	}
-
-	pr_warn("%s: CFE image tag at 0x%llx CRC invalid (expected %08x, actual %08x)\n",
-		name, tag_offset, buf->header_crc, computed_crc);
-	return 1;
-}
+static const char * const bcm63xx_cfe_part_types[] = {
+	"bcm963xx-imagetag",
+	NULL,
+};
 
 static int bcm63xx_parse_cfe_nor_partitions(struct mtd_info *master,
 	const struct mtd_partition **pparts, struct bcm963xx_nvram *nvram)
 {
-	/* CFE, NVRAM and global Linux are always present */
-	int nrparts = 3, curpart = 0;
-	struct bcm_tag *buf = NULL;
 	struct mtd_partition *parts;
-	int ret;
-	unsigned int rootfsaddr, kerneladdr, spareaddr;
-	unsigned int rootfslen, kernellen, sparelen, totallen;
+	int nrparts = 3, curpart = 0;
 	unsigned int cfelen, nvramlen;
 	unsigned int cfe_erasesize;
 	int i;
-	bool rootfs_first = false;
 
 	cfe_erasesize = max_t(uint32_t, master->erasesize,
 			      BCM963XX_CFE_BLOCK_SIZE);
@@ -146,83 +115,9 @@ static int bcm63xx_parse_cfe_nor_partitions(struct mtd_info *master,
 	nvramlen = nvram->psi_size * SZ_1K;
 	nvramlen = roundup(nvramlen, cfe_erasesize);
 
-	buf = vmalloc(sizeof(struct bcm_tag));
-	if (!buf)
-		return -ENOMEM;
-
-	/* Get the tag */
-	ret = bcm63xx_read_image_tag(master, "rootfs", cfelen, buf);
-	if (!ret) {
-		STR_NULL_TERMINATE(buf->flash_image_start);
-		if (kstrtouint(buf->flash_image_start, 10, &rootfsaddr) ||
-				rootfsaddr < BCM963XX_EXTENDED_SIZE) {
-			pr_err("invalid rootfs address: %*ph\n",
-				(int)sizeof(buf->flash_image_start),
-				buf->flash_image_start);
-			goto invalid_tag;
-		}
-
-		STR_NULL_TERMINATE(buf->kernel_address);
-		if (kstrtouint(buf->kernel_address, 10, &kerneladdr) ||
-				kerneladdr < BCM963XX_EXTENDED_SIZE) {
-			pr_err("invalid kernel address: %*ph\n",
-				(int)sizeof(buf->kernel_address),
-				buf->kernel_address);
-			goto invalid_tag;
-		}
-
-		STR_NULL_TERMINATE(buf->kernel_length);
-		if (kstrtouint(buf->kernel_length, 10, &kernellen)) {
-			pr_err("invalid kernel length: %*ph\n",
-				(int)sizeof(buf->kernel_length),
-				buf->kernel_length);
-			goto invalid_tag;
-		}
-
-		STR_NULL_TERMINATE(buf->total_length);
-		if (kstrtouint(buf->total_length, 10, &totallen)) {
-			pr_err("invalid total length: %*ph\n",
-				(int)sizeof(buf->total_length),
-				buf->total_length);
-			goto invalid_tag;
-		}
-
-		kerneladdr = kerneladdr - BCM963XX_EXTENDED_SIZE;
-		rootfsaddr = rootfsaddr - BCM963XX_EXTENDED_SIZE;
-		spareaddr = roundup(totallen, master->erasesize) + cfelen;
-
-		if (rootfsaddr < kerneladdr) {
-			/* default Broadcom layout */
-			rootfslen = kerneladdr - rootfsaddr;
-			rootfs_first = true;
-		} else {
-			/* OpenWrt layout */
-			rootfsaddr = kerneladdr + kernellen;
-			rootfslen = spareaddr - rootfsaddr;
-		}
-	} else if (ret > 0) {
-invalid_tag:
-		kernellen = 0;
-		rootfslen = 0;
-		rootfsaddr = 0;
-		spareaddr = cfelen;
-	} else {
-		goto out;
-	}
-	sparelen = master->size - spareaddr - nvramlen;
-
-	/* Determine number of partitions */
-	if (rootfslen > 0)
-		nrparts++;
-
-	if (kernellen > 0)
-		nrparts++;
-
 	parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
-	if (!parts) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	if (!parts)
+		return -ENOMEM;
 
 	/* Start building partition list */
 	parts[curpart].name = "CFE";
@@ -230,30 +125,6 @@ static int bcm63xx_parse_cfe_nor_partitions(struct mtd_info *master,
 	parts[curpart].size = cfelen;
 	curpart++;
 
-	if (kernellen > 0) {
-		int kernelpart = curpart;
-
-		if (rootfslen > 0 && rootfs_first)
-			kernelpart++;
-		parts[kernelpart].name = "kernel";
-		parts[kernelpart].offset = kerneladdr;
-		parts[kernelpart].size = kernellen;
-		curpart++;
-	}
-
-	if (rootfslen > 0) {
-		int rootfspart = curpart;
-
-		if (kernellen > 0 && rootfs_first)
-			rootfspart--;
-		parts[rootfspart].name = "rootfs";
-		parts[rootfspart].offset = rootfsaddr;
-		parts[rootfspart].size = rootfslen;
-		if (sparelen > 0  && !rootfs_first)
-			parts[rootfspart].size += sparelen;
-		curpart++;
-	}
-
 	parts[curpart].name = "nvram";
 	parts[curpart].offset = master->size - nvramlen;
 	parts[curpart].size = nvramlen;
@@ -263,22 +134,13 @@ static int bcm63xx_parse_cfe_nor_partitions(struct mtd_info *master,
 	parts[curpart].name = "linux";
 	parts[curpart].offset = cfelen;
 	parts[curpart].size = master->size - cfelen - nvramlen;
+	parts[curpart].types = bcm63xx_cfe_part_types;
 
 	for (i = 0; i < nrparts; i++)
 		pr_info("Partition %d is %s offset %llx and length %llx\n", i,
 			parts[i].name, parts[i].offset,	parts[i].size);
 
-	pr_info("Spare partition is offset %x and length %x\n",	spareaddr,
-		sparelen);
-
 	*pparts = parts;
-	ret = 0;
-
-out:
-	vfree(buf);
-
-	if (ret)
-		return ret;
 
 	return nrparts;
 }
@@ -311,9 +173,16 @@ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
 	return ret;
 };
 
+static const struct of_device_id parse_bcm63xx_cfe_match_table[] = {
+	{ .compatible = "brcm,bcm963xx-cfe-nor-partitions" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, parse_bcm63xx_cfe_match_table);
+
 static struct mtd_part_parser bcm63xx_cfe_parser = {
 	.parse_fn = bcm63xx_parse_cfe_partitions,
 	.name = "bcm63xxpart",
+	.of_match_table = parse_bcm63xx_cfe_match_table,
 };
 module_mtd_part_parser(bcm63xx_cfe_parser);
 

drivers/mtd/chips/cfi_cmdset_0002.c

@@ -869,6 +869,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 		/* Only if there's no operation suspended... */
 		if (mode == FL_READY && chip->oldstate == FL_READY)
 			return 0;
+		/* fall through */
 
 	default:
 	sleep:
@@ -2751,6 +2752,7 @@ static void cfi_amdstd_sync (struct mtd_info *mtd)
 			 * as the whole point is that nobody can do anything
 			 * with the chip now anyway.
 			 */
+			/* fall through */
 		case FL_SYNCING:
 			mutex_unlock(&chip->mutex);
 			break;

drivers/mtd/chips/cfi_util.c

@@ -109,10 +109,13 @@ map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi
 	case 8:
 		onecmd |= (onecmd << (chip_mode * 32));
 #endif
+		/* fall through */
 	case 4:
 		onecmd |= (onecmd << (chip_mode * 16));
+		/* fall through */
 	case 2:
 		onecmd |= (onecmd << (chip_mode * 8));
+		/* fall through */
 	case 1:
 		;
 	}
@@ -162,10 +165,13 @@ unsigned long cfi_merge_status(map_word val, struct map_info *map,
 	case 8:
 		res |= (onestat >> (chip_mode * 32));
 #endif
+		/* fall through */
 	case 4:
 		res |= (onestat >> (chip_mode * 16));
+		/* fall through */
 	case 2:
 		res |= (onestat >> (chip_mode * 8));
+		/* fall through */
 	case 1:
 		;
 	}

drivers/mtd/devices/Kconfig

@@ -207,7 +207,7 @@ comment "Disk-On-Chip Device Drivers"
 config MTD_DOCG3
 	tristate "M-Systems Disk-On-Chip G3"
 	select BCH
-	select BCH_CONST_PARAMS if !MTD_NAND_BCH
+	select BCH_CONST_PARAMS if !MTD_NAND_ECC_SW_BCH
 	select BITREVERSE
 	help
 	  This provides an MTD device driver for the M-Systems DiskOnChip

drivers/mtd/devices/phram.c

@@ -147,8 +147,10 @@ static int parse_num64(uint64_t *num64, char *token)
 			switch (token[len - 2]) {
 			case 'G':
 				shift += 10;
+				/* fall through */
 			case 'M':
 				shift += 10;
+				/* fall through */
 			case 'k':
 				shift += 10;
 				token[len - 2] = 0;