Commit 4eb2088c authored by Anshuman Khandual's avatar Anshuman Khandual Committed by Michael Ellerman

powerpc/dscr: Add documentation for DSCR support

This patch adds a new documentation file explaining the DSCR support on
powerpc platforms. This explains DSCR related data structure, code paths
and also available user interfaces. Any further functional changes to
the DSCR support in the kernel should definitely update the
documentation here.
Signed-off-by: default avatarAnshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent d3cb06e0
...@@ -30,3 +30,5 @@ ptrace.txt ...@@ -30,3 +30,5 @@ ptrace.txt
- Information on the ptrace interfaces for hardware debug registers. - Information on the ptrace interfaces for hardware debug registers.
transactional_memory.txt transactional_memory.txt
- Overview of the Power8 transactional memory support. - Overview of the Power8 transactional memory support.
dscr.txt
- Overview DSCR (Data Stream Control Register) support.
DSCR (Data Stream Control Register)
================================================
DSCR register in powerpc allows user to have some control of prefetch of data
stream in the processor. Please refer to the ISA documents or related manual
for more detailed information regarding how to use this DSCR to attain this
control of the pefetches . This document here provides an overview of kernel
support for DSCR, related kernel objects, it's functionalities and exported
user interface.
(A) Data Structures:
(1) thread_struct:
dscr /* Thread DSCR value */
dscr_inherit /* Thread has changed default DSCR */
(2) PACA:
dscr_default /* per-CPU DSCR default value */
(3) sysfs.c:
dscr_default /* System DSCR default value */
(B) Scheduler Changes:
Scheduler will write the per-CPU DSCR default which is stored in the
CPU's PACA value into the register if the thread has dscr_inherit value
cleared which means that it has not changed the default DSCR till now.
If the dscr_inherit value is set which means that it has changed the
default DSCR value, scheduler will write the changed value which will
now be contained in thread struct's dscr into the register instead of
the per-CPU default PACA based DSCR value.
NOTE: Please note here that the system wide global DSCR value never
gets used directly in the scheduler process context switch at all.
(C) SYSFS Interface:
Global DSCR default: /sys/devices/system/cpu/dscr_default
CPU specific DSCR default: /sys/devices/system/cpu/cpuN/dscr
Changing the global DSCR default in the sysfs will change all the CPU
specific DSCR defaults immediately in their PACA structures. Again if
the current process has the dscr_inherit clear, it also writes the new
value into every CPU's DSCR register right away and updates the current
thread's DSCR value as well.
Changing the CPU specif DSCR default value in the sysfs does exactly
the same thing as above but unlike the global one above, it just changes
stuff for that particular CPU instead for all the CPUs on the system.
(D) User Space Instructions:
The DSCR register can be accessed in the user space using any of these
two SPR numbers available for that purpose.
(1) Problem state SPR: 0x03 (Un-privileged, POWER8 only)
(2) Privileged state SPR: 0x11 (Privileged)
Accessing DSCR through privileged SPR number (0x11) from user space
works, as it is emulated following an illegal instruction exception
inside the kernel. Both mfspr and mtspr instructions are emulated.
Accessing DSCR through user level SPR (0x03) from user space will first
create a facility unavailable exception. Inside this exception handler
all mfspr isntruction based read attempts will get emulated and returned
where as the first mtspr instruction based write attempts will enable
the DSCR facility for the next time around (both for read and write) by
setting DSCR facility in the FSCR register.
(E) Specifics about 'dscr_inherit':
The thread struct element 'dscr_inherit' represents whether the thread
in question has attempted and changed the DSCR itself using any of the
following methods. This element signifies whether the thread wants to
use the CPU default DSCR value or its own changed DSCR value in the
kernel.
(1) mtspr instruction (SPR number 0x03)
(2) mtspr instruction (SPR number 0x11)
(3) ptrace interface (Explicitly set user DSCR value)
Any child of the process created after this event in the process inherits
this same behaviour as well.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment