Commit 50280c01 authored by Chad Dupuis's avatar Chad Dupuis Committed by James Bottomley

[SCSI] Revert "qla2xxx: Ramp down queue depth for attached SCSI devices when...

[SCSI] Revert "qla2xxx: Ramp down queue depth for attached SCSI devices when driver resources are low."

This reverts commit 3c290d0bSigned-off-by: default avatarChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: default avatarSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: default avatarJames Bottomley <JBottomley@Parallels.com>
parent 8f476115
......@@ -2734,7 +2734,6 @@ struct req_que {
srb_t **outstanding_cmds;
uint32_t current_outstanding_cmd;
uint16_t num_outstanding_cmds;
#define MAX_Q_DEPTH 32
int max_q_depth;
dma_addr_t dma_fx00;
......@@ -3303,12 +3302,6 @@ struct qla_hw_data {
struct work_struct idc_state_handler;
struct work_struct nic_core_unrecoverable;
#define HOST_QUEUE_RAMPDOWN_INTERVAL (60 * HZ)
#define HOST_QUEUE_RAMPUP_INTERVAL (30 * HZ)
unsigned long host_last_rampdown_time;
unsigned long host_last_rampup_time;
int cfg_lun_q_depth;
struct mr_data_fx00 mr;
struct qlt_hw_data tgt;
......@@ -3372,12 +3365,10 @@ typedef struct scsi_qla_host {
#define MPI_RESET_NEEDED 19 /* Initiate MPI FW reset */
#define ISP_QUIESCE_NEEDED 20 /* Driver need some quiescence */
#define SCR_PENDING 21 /* SCR in target mode */
#define HOST_RAMP_DOWN_QUEUE_DEPTH 22
#define HOST_RAMP_UP_QUEUE_DEPTH 23
#define PORT_UPDATE_NEEDED 24
#define FX00_RESET_RECOVERY 25
#define FX00_TARGET_SCAN 26
#define FX00_CRITEMP_RECOVERY 27
#define PORT_UPDATE_NEEDED 22
#define FX00_RESET_RECOVERY 23
#define FX00_TARGET_SCAN 24
#define FX00_CRITEMP_RECOVERY 25
uint32_t device_flags;
#define SWITCH_FOUND BIT_0
......
......@@ -98,7 +98,6 @@ extern int qlport_down_retry;
extern int ql2xplogiabsentdevice;
extern int ql2xloginretrycount;
extern int ql2xfdmienable;
extern int ql2xmaxqdepth;
extern int ql2xallocfwdump;
extern int ql2xextended_error_logging;
extern int ql2xiidmaenable;
......
......@@ -260,25 +260,6 @@ qla2x00_gid_list_size(struct qla_hw_data *ha)
return sizeof(struct gid_list_info) * ha->max_fibre_devices;
}
static inline void
qla2x00_do_host_ramp_up(scsi_qla_host_t *vha)
{
if (vha->hw->cfg_lun_q_depth >= ql2xmaxqdepth)
return;
/* Wait at least HOST_QUEUE_RAMPDOWN_INTERVAL before ramping up */
if (time_before(jiffies, (vha->hw->host_last_rampdown_time +
HOST_QUEUE_RAMPDOWN_INTERVAL)))
return;
/* Wait at least HOST_QUEUE_RAMPUP_INTERVAL between each ramp up */
if (time_before(jiffies, (vha->hw->host_last_rampup_time +
HOST_QUEUE_RAMPUP_INTERVAL)))
return;
set_bit(HOST_RAMP_UP_QUEUE_DEPTH, &vha->dpc_flags);
}
static inline void
qla2x00_handle_mbx_completion(struct qla_hw_data *ha, int status)
{
......
......@@ -1991,7 +1991,6 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
/* Fast path completion. */
if (comp_status == CS_COMPLETE && scsi_status == 0) {
qla2x00_do_host_ramp_up(vha);
qla2x00_process_completed_request(vha, req, handle);
return;
......@@ -2250,9 +2249,6 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
cp->cmnd, scsi_bufflen(cp), rsp_info_len,
resid_len, fw_resid_len);
if (!res)
qla2x00_do_host_ramp_up(vha);
if (rsp->status_srb == NULL)
sp->done(ha, sp, res);
}
......
......@@ -2419,7 +2419,6 @@ qlafx00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
/* Fast path completion. */
if (comp_status == CS_COMPLETE && scsi_status == 0) {
qla2x00_do_host_ramp_up(vha);
qla2x00_process_completed_request(vha, req, handle);
return;
}
......@@ -2630,9 +2629,6 @@ qlafx00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
rsp_info_len, resid_len, fw_resid_len, sense_len,
par_sense_len, rsp_info_len);
if (!res)
qla2x00_do_host_ramp_up(vha);
if (rsp->status_srb == NULL)
sp->done(ha, sp, res);
}
......
......@@ -110,7 +110,8 @@ MODULE_PARM_DESC(ql2xfdmienable,
"Enables FDMI registrations. "
"0 - no FDMI. Default is 1 - perform FDMI.");
int ql2xmaxqdepth = MAX_Q_DEPTH;
#define MAX_Q_DEPTH 32
static int ql2xmaxqdepth = MAX_Q_DEPTH;
module_param(ql2xmaxqdepth, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xmaxqdepth,
"Maximum queue depth to set for each LUN. "
......@@ -728,10 +729,8 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
}
sp = qla2x00_get_sp(vha, fcport, GFP_ATOMIC);
if (!sp) {
set_bit(HOST_RAMP_DOWN_QUEUE_DEPTH, &vha->dpc_flags);
if (!sp)
goto qc24_host_busy;
}
sp->u.scmd.cmd = cmd;
sp->type = SRB_SCSI_CMD;
......@@ -744,7 +743,6 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
if (rval != QLA_SUCCESS) {
ql_dbg(ql_dbg_io + ql_dbg_verbose, vha, 0x3013,
"Start scsi failed rval=%d for cmd=%p.\n", rval, cmd);
set_bit(HOST_RAMP_DOWN_QUEUE_DEPTH, &vha->dpc_flags);
goto qc24_host_busy_free_sp;
}
......@@ -1474,81 +1472,6 @@ qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type)
return tag_type;
}
static void
qla2x00_host_ramp_down_queuedepth(scsi_qla_host_t *vha)
{
scsi_qla_host_t *vp;
struct Scsi_Host *shost;
struct scsi_device *sdev;
struct qla_hw_data *ha = vha->hw;
unsigned long flags;
ha->host_last_rampdown_time = jiffies;
if (ha->cfg_lun_q_depth <= vha->host->cmd_per_lun)
return;
if ((ha->cfg_lun_q_depth / 2) < vha->host->cmd_per_lun)
ha->cfg_lun_q_depth = vha->host->cmd_per_lun;
else
ha->cfg_lun_q_depth = ha->cfg_lun_q_depth / 2;
/*
* Geometrically ramp down the queue depth for all devices on this
* adapter
*/
spin_lock_irqsave(&ha->vport_slock, flags);
list_for_each_entry(vp, &ha->vp_list, list) {
shost = vp->host;
shost_for_each_device(sdev, shost) {
if (sdev->queue_depth > shost->cmd_per_lun) {
if (sdev->queue_depth < ha->cfg_lun_q_depth)
continue;
ql_dbg(ql_dbg_io, vp, 0x3031,
"%ld:%d:%d: Ramping down queue depth to %d",
vp->host_no, sdev->id, sdev->lun,
ha->cfg_lun_q_depth);
qla2x00_change_queue_depth(sdev,
ha->cfg_lun_q_depth, SCSI_QDEPTH_DEFAULT);
}
}
}
spin_unlock_irqrestore(&ha->vport_slock, flags);
return;
}
static void
qla2x00_host_ramp_up_queuedepth(scsi_qla_host_t *vha)
{
scsi_qla_host_t *vp;
struct Scsi_Host *shost;
struct scsi_device *sdev;
struct qla_hw_data *ha = vha->hw;
unsigned long flags;
ha->host_last_rampup_time = jiffies;
ha->cfg_lun_q_depth++;
/*
* Linearly ramp up the queue depth for all devices on this
* adapter
*/
spin_lock_irqsave(&ha->vport_slock, flags);
list_for_each_entry(vp, &ha->vp_list, list) {
shost = vp->host;
shost_for_each_device(sdev, shost) {
if (sdev->queue_depth > ha->cfg_lun_q_depth)
continue;
qla2x00_change_queue_depth(sdev, ha->cfg_lun_q_depth,
SCSI_QDEPTH_RAMP_UP);
}
}
spin_unlock_irqrestore(&ha->vport_slock, flags);
return;
}
/**
* qla2x00_config_dma_addressing() - Configure OS DMA addressing method.
* @ha: HA context
......@@ -2424,7 +2347,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
ha->init_cb_size = sizeof(init_cb_t);
ha->link_data_rate = PORT_SPEED_UNKNOWN;
ha->optrom_size = OPTROM_SIZE_2300;
ha->cfg_lun_q_depth = ql2xmaxqdepth;
/* Assign ISP specific operations. */
if (IS_QLA2100(ha)) {
......@@ -4994,17 +4916,6 @@ qla2x00_do_dpc(void *data)
qla2xxx_flash_npiv_conf(base_vha);
}
if (test_and_clear_bit(HOST_RAMP_DOWN_QUEUE_DEPTH,
&base_vha->dpc_flags)) {
/* Prevents simultaneous ramp up and down */
clear_bit(HOST_RAMP_UP_QUEUE_DEPTH,
&base_vha->dpc_flags);
qla2x00_host_ramp_down_queuedepth(base_vha);
}
if (test_and_clear_bit(HOST_RAMP_UP_QUEUE_DEPTH,
&base_vha->dpc_flags))
qla2x00_host_ramp_up_queuedepth(base_vha);
intr_on_check:
if (!ha->interrupts_on)
ha->isp_ops->enable_intrs(ha);
......@@ -5186,7 +5097,6 @@ qla2x00_timer(scsi_qla_host_t *vha)
"Loop down - seconds remaining %d.\n",
atomic_read(&vha->loop_down_timer));
}
/* Check if beacon LED needs to be blinked for physical host only */
if (!vha->vp_idx && (ha->beacon_blink_led == 1)) {
/* There is no beacon_blink function for ISP82xx */
......@@ -5210,9 +5120,7 @@ qla2x00_timer(scsi_qla_host_t *vha)
test_bit(ISP_UNRECOVERABLE, &vha->dpc_flags) ||
test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags) ||
test_bit(VP_DPC_NEEDED, &vha->dpc_flags) ||
test_bit(RELOGIN_NEEDED, &vha->dpc_flags) ||
test_bit(HOST_RAMP_DOWN_QUEUE_DEPTH, &vha->dpc_flags) ||
test_bit(HOST_RAMP_UP_QUEUE_DEPTH, &vha->dpc_flags))) {
test_bit(RELOGIN_NEEDED, &vha->dpc_flags))) {
ql_dbg(ql_dbg_timer, vha, 0x600b,
"isp_abort_needed=%d loop_resync_needed=%d "
"fcport_update_needed=%d start_dpc=%d "
......@@ -5225,15 +5133,12 @@ qla2x00_timer(scsi_qla_host_t *vha)
ql_dbg(ql_dbg_timer, vha, 0x600c,
"beacon_blink_needed=%d isp_unrecoverable=%d "
"fcoe_ctx_reset_needed=%d vp_dpc_needed=%d "
"relogin_needed=%d, host_ramp_down_needed=%d "
"host_ramp_up_needed=%d.\n",
"relogin_needed=%d.\n",
test_bit(BEACON_BLINK_NEEDED, &vha->dpc_flags),
test_bit(ISP_UNRECOVERABLE, &vha->dpc_flags),
test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags),
test_bit(VP_DPC_NEEDED, &vha->dpc_flags),
test_bit(RELOGIN_NEEDED, &vha->dpc_flags),
test_bit(HOST_RAMP_UP_QUEUE_DEPTH, &vha->dpc_flags),
test_bit(HOST_RAMP_DOWN_QUEUE_DEPTH, &vha->dpc_flags));
test_bit(RELOGIN_NEEDED, &vha->dpc_flags));
qla2xxx_wake_dpc(vha);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment