Merge tag 'mvebu-soc-4.11-2' of git://git.infradead.org/linux-mvebu into next/soc

Pull "mvebu soc for 4.11 (part 2)" from Gregory CLEMENT:

SoC part of the support for the for Marvell switches with integrated
CPUs based on Armada XP: the SMP support is slightly different.

* tag 'mvebu-soc-4.11-2' of git://git.infradead.org/linux-mvebu:
  arm: mvebu: support for SMP on 98DX3336 SoC

Documentation/devicetree/bindings/arm/cpus.txt

@@ -202,6 +202,7 @@ nodes to be present and contain the properties described below.
 			    "marvell,armada-380-smp"
 			    "marvell,armada-390-smp"
 			    "marvell,armada-xp-smp"
+			    "marvell,98dx3236-smp"
 			    "mediatek,mt6589-smp"
 			    "mediatek,mt81xx-tz-smp"
 			    "qcom,gcc-msm8660"

Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt

+Resume Control
+--------------
+Available on Marvell SOCs: 98DX3336 and 98DX4251
+
+Required properties:
+
+- compatible: must be "marvell,98dx3336-resume-ctrl"
+
+- reg: Should contain resume control registers location and length
+
+Example:
+
+resume@20980 {
+	compatible = "marvell,98dx3336-resume-ctrl";
+	reg = <0x20980 0x10>;
+};

arch/arm/mach-mvebu/platsmp.c

@@ -184,3 +184,78 @@ const struct smp_operations armada_xp_smp_ops __initconst = {
 
 CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp",
 		      &armada_xp_smp_ops);
+
+#define MV98DX3236_CPU_RESUME_CTRL_REG 0x08
+#define MV98DX3236_CPU_RESUME_ADDR_REG 0x04
+
+static const struct of_device_id of_mv98dx3236_resume_table[] = {
+	{
+		.compatible = "marvell,98dx3336-resume-ctrl",
+	},
+	{ /* end of list */ },
+};
+
+static int mv98dx3236_resume_set_cpu_boot_addr(int hw_cpu, void *boot_addr)
+{
+	struct device_node *np;
+	void __iomem *base;
+	WARN_ON(hw_cpu != 1);
+
+	np = of_find_matching_node(NULL, of_mv98dx3236_resume_table);
+	if (!np)
+		return -ENODEV;
+
+	base = of_io_request_and_map(np, 0, of_node_full_name(np));
+	of_node_put(np);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	writel(0, base + MV98DX3236_CPU_RESUME_CTRL_REG);
+	writel(virt_to_phys(boot_addr), base + MV98DX3236_CPU_RESUME_ADDR_REG);
+
+	iounmap(base);
+
+	return 0;
+}
+
+static int mv98dx3236_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	int ret, hw_cpu;
+
+	hw_cpu = cpu_logical_map(cpu);
+	set_secondary_cpu_clock(hw_cpu);
+	mv98dx3236_resume_set_cpu_boot_addr(hw_cpu,
+					    armada_xp_secondary_startup);
+
+	/*
+	 * This is needed to wake up CPUs in the offline state after
+	 * using CPU hotplug.
+	 */
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	/*
+	 * This is needed to take secondary CPUs out of reset on the
+	 * initial boot.
+	 */
+	ret = mvebu_cpu_reset_deassert(hw_cpu);
+	if (ret) {
+		pr_warn("unable to boot CPU: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct smp_operations mv98dx3236_smp_ops __initconst = {
+	.smp_init_cpus		= armada_xp_smp_init_cpus,
+	.smp_prepare_cpus	= armada_xp_smp_prepare_cpus,
+	.smp_boot_secondary	= mv98dx3236_boot_secondary,
+	.smp_secondary_init     = armada_xp_secondary_init,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= armada_xp_cpu_die,
+	.cpu_kill               = armada_xp_cpu_kill,
+#endif
+};
+
+CPU_METHOD_OF_DECLARE(mv98dx3236_smp, "marvell,98dx3236-smp",
+		      &mv98dx3236_smp_ops);