dt-bindings: Fix dtc warnings in examples

Fix all the warnings in the DT binding schema examples when built with
'W=1'. This is in preparation to make that the default for examples.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml

@@ -52,7 +52,7 @@ required:
 
 examples:
   - |
-    mlahb: ahb {
+    mlahb: ahb@38000000 {
       compatible = "st,mlahb", "simple-bus";
       #address-cells = <1>;
       #size-cells = <1>;

Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml

@@ -40,7 +40,7 @@ additionalProperties: false
 
 examples:
   - |
-    osc24M: clk@01c20050 {
+    osc24M: clk@1c20050 {
         #clock-cells = <0>;
         compatible = "allwinner,sun4i-a10-osc-clk";
         reg = <0x01c20050 0x4>;

Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml

@@ -41,7 +41,7 @@ additionalProperties: false
 
 examples:
   - |
-    clk@0600005c {
+    clk@600005c {
         #clock-cells = <0>;
         compatible = "allwinner,sun9i-a80-gt-clk";
         reg = <0x0600005c 0x4>;

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml

@@ -49,11 +49,7 @@ examples:
         resets = <&tcon_ch0_clk 0>;
 
         port {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            tve0_in_tcon0: endpoint@0 {
-                reg = <0>;
+            tve0_in_tcon0: endpoint {
                 remote-endpoint = <&tcon0_out_tve0>;
             };
         };

Documentation/devicetree/bindings/display/bridge/anx6345.yaml

@@ -79,21 +79,15 @@ examples:
           #size-cells = <0>;
 
           anx6345_in: port@0 {
-            #address-cells = <1>;
-            #size-cells = <0>;
             reg = <0>;
-            anx6345_in_tcon0: endpoint@0 {
-              reg = <0>;
+            anx6345_in_tcon0: endpoint {
               remote-endpoint = <&tcon0_out_anx6345>;
             };
           };
 
           anx6345_out: port@1 {
-            #address-cells = <1>;
-            #size-cells = <0>;
             reg = <1>;
-            anx6345_out_panel: endpoint@0 {
-              reg = <0>;
+            anx6345_out_panel: endpoint {
               remote-endpoint = <&panel_in_edp>;
             };
           };

Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml

@@ -37,6 +37,8 @@ examples:
     dsi@ff450000 {
         #address-cells = <1>;
         #size-cells = <0>;
+        reg = <0xff450000 0x1000>;
+
         panel@0 {
             compatible = "leadtek,ltk500hd1829";
             reg = <0>;

Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml

@@ -37,6 +37,8 @@ examples:
     dsi@ff450000 {
         #address-cells = <1>;
         #size-cells = <0>;
+        reg = <0xff450000 0x1000>;
+
         panel@0 {
             compatible = "xinpeng,xpp055c272";
             reg = <0>;

Documentation/devicetree/bindings/display/simple-framebuffer.yaml

@@ -174,10 +174,6 @@ examples:
       };
     };
 
-    soc@1c00000 {
-      lcdc0: lcdc@1c0c000 {
-        compatible = "allwinner,sun4i-a10-lcdc";
-      };
-    };
+    lcdc0: lcdc { };
 
 ...

Documentation/devicetree/bindings/dma/ti/k3-udma.yaml

@@ -143,7 +143,7 @@ examples:
             #size-cells = <2>;
             dma-coherent;
             dma-ranges;
-            ranges;
+            ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0x05000000>;
 
             ti,sci-dev-id = <118>;
 
@@ -169,16 +169,4 @@ examples:
                 ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
             };
         };
-
-        mcasp0: mcasp@02B00000 {
-            dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
-            dma-names = "tx", "rx";
-        };
-
-        crypto: crypto@4E00000 {
-            compatible = "ti,sa2ul-crypto";
-
-            dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>;
-            dma-names = "tx", "rx1", "rx2";
-        };
     };

Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml

@@ -84,31 +84,31 @@ examples:
     gpu_opp_table: opp_table0 {
       compatible = "operating-points-v2";
 
-      opp@533000000 {
+      opp-533000000 {
         opp-hz = /bits/ 64 <533000000>;
         opp-microvolt = <1250000>;
       };
-      opp@450000000 {
+      opp-450000000 {
         opp-hz = /bits/ 64 <450000000>;
         opp-microvolt = <1150000>;
       };
-      opp@400000000 {
+      opp-400000000 {
         opp-hz = /bits/ 64 <400000000>;
         opp-microvolt = <1125000>;
       };
-      opp@350000000 {
+      opp-350000000 {
         opp-hz = /bits/ 64 <350000000>;
         opp-microvolt = <1075000>;
       };
-      opp@266000000 {
+      opp-266000000 {
         opp-hz = /bits/ 64 <266000000>;
         opp-microvolt = <1025000>;
       };
-      opp@160000000 {
+      opp-160000000 {
         opp-hz = /bits/ 64 <160000000>;
         opp-microvolt = <925000>;
       };
-      opp@100000000 {
+      opp-100000000 {
         opp-hz = /bits/ 64 <100000000>;
         opp-microvolt = <912500>;
       };

Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml

@@ -138,31 +138,31 @@ examples:
     gpu_opp_table: opp_table0 {
       compatible = "operating-points-v2";
 
-      opp@533000000 {
+      opp-533000000 {
         opp-hz = /bits/ 64 <533000000>;
         opp-microvolt = <1250000>;
       };
-      opp@450000000 {
+      opp-450000000 {
         opp-hz = /bits/ 64 <450000000>;
         opp-microvolt = <1150000>;
       };
-      opp@400000000 {
+      opp-400000000 {
         opp-hz = /bits/ 64 <400000000>;
         opp-microvolt = <1125000>;
       };
-      opp@350000000 {
+      opp-350000000 {
         opp-hz = /bits/ 64 <350000000>;
         opp-microvolt = <1075000>;
       };
-      opp@266000000 {
+      opp-266000000 {
         opp-hz = /bits/ 64 <266000000>;
         opp-microvolt = <1025000>;
       };
-      opp@160000000 {
+      opp-160000000 {
         opp-hz = /bits/ 64 <160000000>;
         opp-microvolt = <925000>;
       };
-      opp@100000000 {
+      opp-100000000 {
         opp-hz = /bits/ 64 <100000000>;
         opp-microvolt = <912500>;
       };

Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml

@@ -123,7 +123,7 @@ examples:
         samsung,syscon-phandle = <&pmu_system_controller>;
 
         /* NTC thermistor is a hwmon device */
-        ncp15wb473@0 {
+        ncp15wb473 {
             compatible = "murata,ncp15wb473";
             pullup-uv = <1800000>;
             pullup-ohm = <47000>;

Documentation/devicetree/bindings/input/touchscreen/goodix.yaml

@@ -62,7 +62,7 @@ required:
 
 examples:
 - |
-    i2c@00000000 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
       gt928@5d {

Documentation/devicetree/bindings/media/ti,cal.yaml

@@ -177,7 +177,7 @@ examples:
         };
     };
 
-    i2c5: i2c@4807c000 {
+    i2c {
         clock-frequency = <400000>;
         #address-cells = <1>;
         #size-cells = <0>;

Documentation/devicetree/bindings/mfd/max77650.yaml

@@ -97,14 +97,14 @@ examples:
             regulators {
                 compatible = "maxim,max77650-regulator";
 
-                max77650_ldo: regulator@0 {
+                max77650_ldo: regulator-ldo {
                     regulator-compatible = "ldo";
                     regulator-name = "max77650-ldo";
                     regulator-min-microvolt = <1350000>;
                     regulator-max-microvolt = <2937500>;
                 };
 
-                max77650_sbb0: regulator@1 {
+                max77650_sbb0: regulator-sbb0 {
                     regulator-compatible = "sbb0";
                     regulator-name = "max77650-sbb0";
                     regulator-min-microvolt = <800000>;

Documentation/devicetree/bindings/mmc/mmc-controller.yaml

@@ -370,6 +370,7 @@ examples:
     mmc3: mmc@1c12000 {
         #address-cells = <1>;
         #size-cells = <0>;
+        reg = <0x1c12000 0x200>;
         pinctrl-names = "default";
         pinctrl-0 = <&mmc3_pins_a>;
         vmmc-supply = <&reg_vmmc3>;

Documentation/devicetree/bindings/nvmem/nvmem.yaml

@@ -76,6 +76,8 @@ examples:
       qfprom: eeprom@700000 {
           #address-cells = <1>;
           #size-cells = <1>;
+          reg = <0x00700000 0x100000>;
+
           wp-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 
           /* ... */

Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml

@@ -86,7 +86,7 @@ examples:
     #include <dt-bindings/clock/sun4i-a10-ccu.h>
     #include <dt-bindings/reset/sun4i-a10-ccu.h>
 
-    usbphy: phy@01c13400 {
+    usbphy: phy@1c13400 {
         #phy-cells = <1>;
         compatible = "allwinner,sun4i-a10-usb-phy";
         reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;

Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml

@@ -248,7 +248,7 @@ examples:
       };
 
     //Example 3 pin groups
-      pinctrl@60020000 {
+      pinctrl {
         usart1_pins_a: usart1-0 {
                 pins1 {
                         pinmux = <STM32_PINMUX('A', 9, AF7)>;

Documentation/devicetree/bindings/regulator/regulator.yaml

@@ -191,7 +191,7 @@ patternProperties:
 
 examples:
   - |
-    xyzreg: regulator@0 {
+    xyzreg: regulator {
       regulator-min-microvolt = <1000000>;
       regulator-max-microvolt = <2500000>;
       regulator-always-on;

Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml

@@ -125,7 +125,7 @@ examples:
       #size-cells = <1>;
       ranges;
 
-      sram_a: sram@00000000 {
+      sram_a: sram@0 {
         compatible = "mmio-sram";
         reg = <0x00000000 0xc000>;
         #address-cells = <1>;

Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml

@@ -87,7 +87,7 @@ additionalProperties: false
 
 examples:
   - |
-    timer {
+    timer@1c20c00 {
         compatible = "allwinner,sun4i-a10-timer";
         reg = <0x01c20c00 0x400>;
         interrupts = <22>,