spi: spi-fsl-dspi: fix broken DSPI_EOQ_MODE

This patch fixes the dspi_eoq_write function used by the
ColdFire mcf5441x family. The 16 bit cmd part must be re-set at
each data transfer.

Also, now that fifo_size variables are used for eoq_read/write,
a proper fifo size must be set (16 slots for the ColdFire dspi
module version).
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Acked-by: Esben Haabendal <esben@haabendal.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

drivers/spi/spi-fsl-dspi.c

@@ -30,7 +30,11 @@
 
 #define DRIVER_NAME "fsl-dspi"
 
+#ifdef CONFIG_M5441x
+#define DSPI_FIFO_SIZE			16
+#else
 #define DSPI_FIFO_SIZE			4
+#endif
 #define DSPI_DMA_BUFSIZE		(DSPI_FIFO_SIZE * 1024)
 
 #define SPI_MCR		0x00
@@ -623,9 +627,11 @@ static void dspi_tcfq_read(struct fsl_dspi *dspi)
 static void dspi_eoq_write(struct fsl_dspi *dspi)
 {
 	int fifo_size = DSPI_FIFO_SIZE;
+	u16 xfer_cmd = dspi->tx_cmd;
 
 	/* Fill TX FIFO with as many transfers as possible */
 	while (dspi->len && fifo_size--) {
+		dspi->tx_cmd = xfer_cmd;
 		/* Request EOQF for last transfer in FIFO */
 		if (dspi->len == dspi->bytes_per_word || fifo_size == 0)
 			dspi->tx_cmd |= SPI_PUSHR_CMD_EOQ;