[PATCH] sata_sil: convert to new reset mechanism

Convert sata_sil to use new reset mechanism.  sata_sil is fairly
generic and can directly use std routine.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

drivers/scsi/sata_sil.c

@@ -158,7 +158,7 @@ static const struct ata_port_operations sil_ops = {
 	.check_status		= ata_check_status,
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
-	.phy_reset		= sata_phy_reset,
+	.probe_reset		= ata_std_probe_reset,
 	.post_set_mode		= sil_post_set_mode,
 	.bmdma_setup            = ata_bmdma_setup,
 	.bmdma_start            = ata_bmdma_start,
@@ -181,7 +181,7 @@ static const struct ata_port_info sil_port_info[] = {
 	{
 		.sht		= &sil_sht,
 		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_SRST | ATA_FLAG_MMIO,
+				  ATA_FLAG_MMIO,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
 		.udma_mask	= 0x3f,			/* udma0-5 */
@@ -190,8 +190,7 @@ static const struct ata_port_info sil_port_info[] = {
 	{
 		.sht		= &sil_sht,
 		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_SRST | ATA_FLAG_MMIO |
-				  SIL_FLAG_MOD15WRITE,
+				  ATA_FLAG_MMIO | SIL_FLAG_MOD15WRITE,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
 		.udma_mask	= 0x3f,			/* udma0-5 */
@@ -200,7 +199,7 @@ static const struct ata_port_info sil_port_info[] = {
 	{
 		.sht		= &sil_sht,
 		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_SRST | ATA_FLAG_MMIO,
+				  ATA_FLAG_MMIO,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
 		.udma_mask	= 0x3f,			/* udma0-5 */