Merge branch 'ftgmac100-rework-batch-1-Link-and-Interrupts'

Benjamin Herrenschmidt says:

====================
ftgmac100: Rework batch 1 - Link & Interrupts

This is version 2 of the first batch of updates to the
ftgmac100 driver.

Essentially:

 - A few misc cleanups
 - Fixing link speed & duplex handling (including dealing with
   an Aspeed requirement to double reset the controller when
   the speed changes)
 - And addition of a reset task workqueue which will be used
   for delaying the re-initialization of the controller
 - Fixing a number of issues with how interrupts and NAPI
   are dealt with.

Subsequent batches will rework and improve the rx path, the
tx path, and add a bunch of features and fixes.

Version 2 addresses some review comments to patches 5 and 10
(see version history in the respective emails).
====================
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/faraday/ftgmac100.h

@@ -86,6 +86,20 @@
 #define FTGMAC100_INT_PHYSTS_CHG	(1 << 9)
 #define FTGMAC100_INT_NO_HPTXBUF	(1 << 10)
 
+/* Interrupts we care about in NAPI mode */
+#define FTGMAC100_INT_BAD  (FTGMAC100_INT_RPKT_LOST | \
+			    FTGMAC100_INT_XPKT_LOST | \
+			    FTGMAC100_INT_AHB_ERR   | \
+			    FTGMAC100_INT_NO_RXBUF)
+
+/* Normal RX/TX interrupts, enabled when NAPI off */
+#define FTGMAC100_INT_RXTX (FTGMAC100_INT_XPKT_ETH  | \
+			    FTGMAC100_INT_RPKT_BUF)
+
+/* All the interrupts we care about */
+#define FTGMAC100_INT_ALL (FTGMAC100_INT_RPKT_BUF  |  \
+			   FTGMAC100_INT_BAD)
+
 /*
  * Interrupt timer control register
  */