Revert "Input: synaptics - Lenovo Thinkpad T460p devices should use RMI"
This reverts commit 48282969 which caused the following issues: 1. On T460p with BIOS version 2.22 touchpad and trackpoint stop working after suspend-resume cycle. Due to strange state of the device another suspend is impossible. The following dmesg errors can be observed: thinkpad_acpi: EC reports that Thermal Table has changed rmi4_smbus 7-002c: failed to get SMBus version number! rmi4_physical rmi4-00: rmi_driver_reset_handler: Failed to read current IRQ mask. rmi4_f01 rmi4-00.fn01: Failed to restore normal operation: -16. rmi4_f01 rmi4-00.fn01: Resume failed with code -16. rmi4_physical rmi4-00: Failed to suspend functions: -16 rmi4_smbus 7-002c: Failed to resume device: -16 PM: resume devices took 0.640 seconds rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-16). rmi4_physical rmi4-00: rmi_driver_clear_irq_bits: Failed to change enabled interrupts! rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts! psmouse: probe of serio3 failed with error -1 2. On another T460p with BIOS version 2.15 two finger scrolling gesture on the touchpad stops working after suspend-resume cycle (about 75% reproducibility, when it still works, the scrolling gesture becomes laggy). Nothing suspicious appears in the dmesg. Analysis form Richard Schütz: "RMI is unreliable on the ThinkPad T460p because the device is affected by the firmware behavior addressed in a7ae8195 ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR")." The affected devices often show: i801_smbus 0000:00:1f.4: BIOS is accessing SMBus registers i801_smbus 0000:00:1f.4: Driver SMBus register access inhibited Reported-by: Richard Schütz <rschuetz@uni-koblenz.de> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Tested-by: Martin Peres <martin.peres@linux.intel.com> Tested-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Showing
Please register or sign in to comment