mfd: Move TPS55910 Kconfig option

Having another TPS chip at the end of the Kconfig when all it's
relatives are grouped together in their own section seems totally
counter-intuitive. Move it, also in the Makefile.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

drivers/mfd/Kconfig

@@ -171,6 +171,15 @@ config MFD_TPS6586X
 	  This driver can also be built as a module.  If so, the module
 	  will be called tps6586x.
 
+config MFD_TPS65910
+	bool "TPS65910 Power Management chip"
+	depends on I2C=y && GPIOLIB
+	select MFD_CORE
+	select GPIO_TPS65910
+	help
+	  if you say yes here you get support for the TPS65910 series of
+	  Power Management chips.
+
 config MFD_TPS65912
 	bool
 	depends on GPIOLIB
@@ -748,15 +757,6 @@ config MFD_PM8XXX_IRQ
 	  This is required to use certain other PM 8xxx features, such as GPIO
 	  and MPP.
 
-config MFD_TPS65910
-	bool "TPS65910 Power Management chip"
-	depends on I2C=y && GPIOLIB
-	select MFD_CORE
-	select GPIO_TPS65910
-	help
-	  if you say yes here you get support for the TPS65910 series of
-	  Power Management chips.
-
 config TPS65911_COMPARATOR
 	tristate
 

drivers/mfd/Makefile

@@ -36,6 +36,7 @@ obj-$(CONFIG_MFD_WM8994)	+= wm8994-core.o wm8994-irq.o
 obj-$(CONFIG_TPS6105X)		+= tps6105x.o
 obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_TPS6507X)		+= tps6507x.o
+obj-$(CONFIG_MFD_TPS65910)	+= tps65910.o tps65910-irq.o
 tps65912-objs                   := tps65912-core.o tps65912-irq.o
 obj-$(CONFIG_MFD_TPS65912)	+= tps65912.o
 obj-$(CONFIG_MFD_TPS65912_I2C)	+= tps65912-i2c.o
@@ -99,5 +100,4 @@ obj-$(CONFIG_MFD_CS5535)	+= cs5535-mfd.o
 obj-$(CONFIG_MFD_OMAP_USB_HOST)	+= omap-usb-host.o
 obj-$(CONFIG_MFD_PM8921_CORE) 	+= pm8921-core.o
 obj-$(CONFIG_MFD_PM8XXX_IRQ) 	+= pm8xxx-irq.o
-obj-$(CONFIG_MFD_TPS65910)	+= tps65910.o tps65910-irq.o
 obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o