Commit 55c79a40 authored by Mark A. Greer's avatar Mark A. Greer Committed by Kevin Hilman

davinci: da8xx: Add base DA830/OMAP-L137 SoC support

The da830/omap l137 is a new SoC from TI that is similar
to the davinci line.  Since its so similar to davinci,
put the support for the da830 in the same directory as
the davinci code.

There are differences, however.  Some of those differences
prevent support for davinci and da830 platforms to work
in the same kernel binary.  Those differences are:

1) Different physical address for RAM.  This is relevant
   to Makefile.boot addresses and PHYS_OFFSET.  The
   Makefile.boot issue isn't truly a kernel issue but
   it means u-boot won't work with a uImage including
   both architectures.  The PHYS_OFFSET issue is
   addressed by the "Allow for runtime-determined
   PHYS_OFFSET" patch by Lennert Buytenhek but it
   hasn't been accepted yet.

2) Different uart addresses.  This is only an issue
   for the 'addruart' assembly macro when CONFIG_DEBUG_LL
   is enabled.  Since the code in that macro is called
   so early (e.g., by _error_p in kernel/head.S when
   the processor lookup fails), we can't determine what
   platform the kernel is running on at runtime to use
   the correct uart address.

These areas have compile errors intentionally inserted
to indicate to the builder they're doing something wrong.

A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added
to distinguish between a true davinci architecture and
the da830 architecture.

Note that the da830 currently has an issue with writeback
data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be
enabled when building a da830 kernel.

Additional generalizations for future SoCs in the da8xx family done by
Sudhakar Rajashekhara and Sekhar Nori.
Signed-off-by: default avatarSteve Chen <schen@mvista.com>
Signed-off-by: default avatarMikhail Cherkashin <mcherkashin@ru.mvista.com>
Signed-off-by: default avatarMark A. Greer <mgreer@mvista.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: default avatarKevin Hilman <khilman@deeprootsystems.com>
parent ff255c6c
......@@ -6,6 +6,9 @@ config AINTC
config CP_INTC
bool
config ARCH_DAVINCI_DMx
bool
menu "TI DaVinci Implementations"
comment "DaVinci Core Type"
......@@ -13,14 +16,25 @@ comment "DaVinci Core Type"
config ARCH_DAVINCI_DM644x
bool "DaVinci 644x based system"
select AINTC
select ARCH_DAVINCI_DMx
config ARCH_DAVINCI_DM355
bool "DaVinci 355 based system"
select AINTC
select ARCH_DAVINCI_DMx
config ARCH_DAVINCI_DM646x
bool "DaVinci 646x based system"
select AINTC
select ARCH_DAVINCI_DMx
config ARCH_DAVINCI_DA830
bool "DA830/OMAP-L137 based system"
select CP_INTC
select ARCH_DAVINCI_DA8XX
config ARCH_DAVINCI_DA8XX
bool
config ARCH_DAVINCI_DM365
bool "DaVinci 365 based system"
......
......@@ -5,15 +5,16 @@
# Common objects
obj-y := time.o clock.o serial.o io.o psc.o \
gpio.o devices.o dma.o usb.o common.o sram.o
gpio.o dma.o usb.o common.o sram.o
obj-$(CONFIG_DAVINCI_MUX) += mux.o
# Chip specific
obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o
obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o
obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o
obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o
obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o devices.o
obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o devices.o
obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o devices.o
obj-$(CONFIG_ARCH_DAVINCI_DM365) += dm365.o devices.o
obj-$(CONFIG_ARCH_DAVINCI_DA830) += da830.o devices-da8xx.o
obj-$(CONFIG_AINTC) += irq.o
obj-$(CONFIG_CP_INTC) += cp_intc.o
......
ifeq ($(CONFIG_ARCH_DAVINCI_DA8XX),y)
ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y)
$(error Cannot enable DaVinci and DA8XX platforms concurrently)
else
zreladdr-y := 0xc0008000
params_phys-y := 0xc0000100
initrd_phys-y := 0xc0800000
endif
else
zreladdr-y := 0x80008000
params_phys-y := 0x80000100
initrd_phys-y := 0x80800000
endif
This diff is collapsed.
/*
* DA8XX/OMAP L1XX platform device data
*
* Copyright (c) 2007-2009, MontaVista Software, Inc. <source@mvista.com>
* Derived from code that was:
* Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/serial_8250.h>
#include <mach/cputype.h>
#include <mach/common.h>
#include <mach/time.h>
#include <mach/da8xx.h>
#include "clock.h"
#define DA8XX_TPCC_BASE 0x01c00000
#define DA8XX_TPTC0_BASE 0x01c08000
#define DA8XX_TPTC1_BASE 0x01c08400
#define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */
#define DA8XX_I2C0_BASE 0x01c22000
#define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000
#define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000
#define DA8XX_EMAC_CPGMAC_BASE 0x01e23000
#define DA8XX_EMAC_MDIO_BASE 0x01e24000
#define DA8XX_GPIO_BASE 0x01e26000
#define DA8XX_I2C1_BASE 0x01e28000
#define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000
#define DA8XX_EMAC_MOD_REG_OFFSET 0x2000
#define DA8XX_EMAC_RAM_OFFSET 0x0000
#define DA8XX_MDIO_REG_OFFSET 0x4000
#define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K
static struct plat_serial8250_port da8xx_serial_pdata[] = {
{
.mapbase = DA8XX_UART0_BASE,
.irq = IRQ_DA8XX_UARTINT0,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
},
{
.mapbase = DA8XX_UART1_BASE,
.irq = IRQ_DA8XX_UARTINT1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
},
{
.mapbase = DA8XX_UART2_BASE,
.irq = IRQ_DA8XX_UARTINT2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
},
{
.flags = 0,
},
};
struct platform_device da8xx_serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = da8xx_serial_pdata,
},
};
static const s8 da8xx_dma_chan_no_event[] = {
20, 21,
-1
};
static const s8 da8xx_queue_tc_mapping[][2] = {
/* {event queue no, TC no} */
{0, 0},
{1, 1},
{-1, -1}
};
static const s8 da8xx_queue_priority_mapping[][2] = {
/* {event queue no, Priority} */
{0, 3},
{1, 7},
{-1, -1}
};
static struct edma_soc_info da8xx_edma_info[] = {
{
.n_channel = 32,
.n_region = 4,
.n_slot = 128,
.n_tc = 2,
.n_cc = 1,
.noevent = da8xx_dma_chan_no_event,
.queue_tc_mapping = da8xx_queue_tc_mapping,
.queue_priority_mapping = da8xx_queue_priority_mapping,
},
};
static struct resource da8xx_edma_resources[] = {
{
.name = "edma_cc0",
.start = DA8XX_TPCC_BASE,
.end = DA8XX_TPCC_BASE + SZ_32K - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "edma_tc0",
.start = DA8XX_TPTC0_BASE,
.end = DA8XX_TPTC0_BASE + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "edma_tc1",
.start = DA8XX_TPTC1_BASE,
.end = DA8XX_TPTC1_BASE + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "edma0",
.start = IRQ_DA8XX_TCERRINT0,
.flags = IORESOURCE_IRQ,
},
{
.name = "edma0_err",
.start = IRQ_DA8XX_CCERRINT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device da8xx_edma_device = {
.name = "edma",
.id = -1,
.dev = {
.platform_data = da8xx_edma_info,
},
.num_resources = ARRAY_SIZE(da8xx_edma_resources),
.resource = da8xx_edma_resources,
};
int __init da8xx_register_edma(void)
{
return platform_device_register(&da8xx_edma_device);
}
static struct resource da8xx_i2c_resources0[] = {
{
.start = DA8XX_I2C0_BASE,
.end = DA8XX_I2C0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_DA8XX_I2CINT0,
.end = IRQ_DA8XX_I2CINT0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device da8xx_i2c_device0 = {
.name = "i2c_davinci",
.id = 1,
.num_resources = ARRAY_SIZE(da8xx_i2c_resources0),
.resource = da8xx_i2c_resources0,
};
static struct resource da8xx_i2c_resources1[] = {
{
.start = DA8XX_I2C1_BASE,
.end = DA8XX_I2C1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_DA8XX_I2CINT1,
.end = IRQ_DA8XX_I2CINT1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device da8xx_i2c_device1 = {
.name = "i2c_davinci",
.id = 2,
.num_resources = ARRAY_SIZE(da8xx_i2c_resources1),
.resource = da8xx_i2c_resources1,
};
int __init da8xx_register_i2c(int instance,
struct davinci_i2c_platform_data *pdata)
{
struct platform_device *pdev;
if (instance == 0)
pdev = &da8xx_i2c_device0;
else if (instance == 1)
pdev = &da8xx_i2c_device1;
else
return -EINVAL;
pdev->dev.platform_data = pdata;
return platform_device_register(pdev);
}
static struct resource da8xx_watchdog_resources[] = {
{
.start = DA8XX_WDOG_BASE,
.end = DA8XX_WDOG_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
struct platform_device davinci_wdt_device = {
.name = "watchdog",
.id = -1,
.num_resources = ARRAY_SIZE(da8xx_watchdog_resources),
.resource = da8xx_watchdog_resources,
};
int __init da8xx_register_watchdog(void)
{
return platform_device_register(&davinci_wdt_device);
}
static struct resource da8xx_emac_resources[] = {
{
.start = DA8XX_EMAC_CPPI_PORT_BASE,
.end = DA8XX_EMAC_CPPI_PORT_BASE + 0x5000 - 1,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_DA8XX_C0_RX_THRESH_PULSE,
.end = IRQ_DA8XX_C0_RX_THRESH_PULSE,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DA8XX_C0_RX_PULSE,
.end = IRQ_DA8XX_C0_RX_PULSE,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DA8XX_C0_TX_PULSE,
.end = IRQ_DA8XX_C0_TX_PULSE,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_DA8XX_C0_MISC_PULSE,
.end = IRQ_DA8XX_C0_MISC_PULSE,
.flags = IORESOURCE_IRQ,
},
};
struct emac_platform_data da8xx_emac_pdata = {
.ctrl_reg_offset = DA8XX_EMAC_CTRL_REG_OFFSET,
.ctrl_mod_reg_offset = DA8XX_EMAC_MOD_REG_OFFSET,
.ctrl_ram_offset = DA8XX_EMAC_RAM_OFFSET,
.mdio_reg_offset = DA8XX_MDIO_REG_OFFSET,
.ctrl_ram_size = DA8XX_EMAC_CTRL_RAM_SIZE,
.version = EMAC_VERSION_2,
};
static struct platform_device da8xx_emac_device = {
.name = "davinci_emac",
.id = 1,
.dev = {
.platform_data = &da8xx_emac_pdata,
},
.num_resources = ARRAY_SIZE(da8xx_emac_resources),
.resource = da8xx_emac_resources,
};
int __init da8xx_register_emac(void)
{
return platform_device_register(&da8xx_emac_device);
}
......@@ -31,6 +31,7 @@ struct davinci_id {
#define DAVINCI_CPU_ID_DM6467 0x64670000
#define DAVINCI_CPU_ID_DM355 0x03550000
#define DAVINCI_CPU_ID_DM365 0x03650000
#define DAVINCI_CPU_ID_DA830 0x08300000
#define IS_DAVINCI_CPU(type, id) \
static inline int is_davinci_ ##type(void) \
......@@ -42,6 +43,7 @@ IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446)
IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830)
#ifdef CONFIG_ARCH_DAVINCI_DM644x
#define cpu_is_davinci_dm644x() is_davinci_dm644x()
......@@ -67,4 +69,10 @@ IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
#define cpu_is_davinci_dm365() 0
#endif
#ifdef CONFIG_ARCH_DAVINCI_DA830
#define cpu_is_davinci_da830() is_davinci_da830()
#else
#define cpu_is_davinci_da830() 0
#endif
#endif
/*
* Chip specific defines for DA8XX/OMAP L1XX SoC
*
* Author: Mark A. Greer <mgreer@mvista.com>
*
* 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef __ASM_ARCH_DAVINCI_DA8XX_H
#define __ASM_ARCH_DAVINCI_DA8XX_H
#include <mach/serial.h>
#include <mach/edma.h>
#include <mach/i2c.h>
#include <mach/emac.h>
/*
* The cp_intc interrupt controller for the da8xx isn't in the same
* chunk of physical memory space as the other registers (like it is
* on the davincis) so it needs to be mapped separately. It will be
* mapped early on when the I/O space is mapped and we'll put it just
* before the I/O space in the processor's virtual memory space.
*/
#define DA8XX_CP_INTC_BASE 0xfffee000
#define DA8XX_CP_INTC_SIZE SZ_8K
#define DA8XX_CP_INTC_VIRT (IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K)
#define DA8XX_BOOT_CFG_BASE (IO_PHYS + 0x14000)
void __init da830_init(void);
int da8xx_register_edma(void);
int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
int da8xx_register_watchdog(void);
int da8xx_register_emac(void);
extern struct platform_device da8xx_serial_device;
extern struct emac_platform_data da8xx_emac_pdata;
extern const short da830_emif25_pins[];
extern const short da830_spi0_pins[];
extern const short da830_spi1_pins[];
extern const short da830_mmc_sd_pins[];
extern const short da830_uart0_pins[];
extern const short da830_uart1_pins[];
extern const short da830_uart2_pins[];
extern const short da830_usb20_pins[];
extern const short da830_usb11_pins[];
extern const short da830_uhpi_pins[];
extern const short da830_cpgmac_pins[];
extern const short da830_emif3c_pins[];
extern const short da830_mcasp0_pins[];
extern const short da830_mcasp1_pins[];
extern const short da830_mcasp2_pins[];
extern const short da830_i2c0_pins[];
extern const short da830_i2c1_pins[];
extern const short da830_lcdcntl_pins[];
extern const short da830_pwm_pins[];
extern const short da830_ecap0_pins[];
extern const short da830_ecap1_pins[];
extern const short da830_ecap2_pins[];
extern const short da830_eqep0_pins[];
extern const short da830_eqep1_pins[];
int da830_pinmux_setup(const short pins[]);
#endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
......@@ -139,6 +139,54 @@ struct edmacc_param {
#define DAVINCI_DMA_PWM1 53
#define DAVINCI_DMA_PWM2 54
/* DA830 specific EDMA3 information */
#define EDMA_DA830_NUM_DMACH 32
#define EDMA_DA830_NUM_TCC 32
#define EDMA_DA830_NUM_PARAMENTRY 128
#define EDMA_DA830_NUM_EVQUE 2
#define EDMA_DA830_NUM_TC 2
#define EDMA_DA830_CHMAP_EXIST 0
#define EDMA_DA830_NUM_REGIONS 4
#define DA830_DMACH2EVENT_MAP0 0x000FC03Fu
#define DA830_DMACH2EVENT_MAP1 0x00000000u
#define DA830_EDMA_ARM_OWN 0x30FFCCFFu
/* DA830 specific EDMA3 Events Information */
enum DA830_edma_ch {
DA830_DMACH_MCASP0_RX,
DA830_DMACH_MCASP0_TX,
DA830_DMACH_MCASP1_RX,
DA830_DMACH_MCASP1_TX,
DA830_DMACH_MCASP2_RX,
DA830_DMACH_MCASP2_TX,
DA830_DMACH_GPIO_BNK0INT,
DA830_DMACH_GPIO_BNK1INT,
DA830_DMACH_UART0_RX,
DA830_DMACH_UART0_TX,
DA830_DMACH_TMR64P0_EVTOUT12,
DA830_DMACH_TMR64P0_EVTOUT34,
DA830_DMACH_UART1_RX,
DA830_DMACH_UART1_TX,
DA830_DMACH_SPI0_RX,
DA830_DMACH_SPI0_TX,
DA830_DMACH_MMCSD_RX,
DA830_DMACH_MMCSD_TX,
DA830_DMACH_SPI1_RX,
DA830_DMACH_SPI1_TX,
DA830_DMACH_DMAX_EVTOUT6,
DA830_DMACH_DMAX_EVTOUT7,
DA830_DMACH_GPIO_BNK2INT,
DA830_DMACH_GPIO_BNK3INT,
DA830_DMACH_I2C0_RX,
DA830_DMACH_I2C0_TX,
DA830_DMACH_I2C1_RX,
DA830_DMACH_I2C1_TX,
DA830_DMACH_GPIO_BNK4INT,
DA830_DMACH_GPIO_BNK5INT,
DA830_DMACH_UART2_RX,
DA830_DMACH_UART2_TX
};
/*ch_status paramater of callback function possible values*/
#define DMA_COMPLETE 1
#define DMA_CC_ERROR 2
......
......@@ -99,9 +99,6 @@
#define IRQ_EMUINT 63
#define DAVINCI_N_AINTC_IRQ 64
#define DAVINCI_N_GPIO 104
#define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO)
#define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
......@@ -242,4 +239,110 @@
#define IRQ_DM365_TCERRINT3 62
#define IRQ_DM365_EMUINT 63
/* DA8XX interrupts */
#define IRQ_DA8XX_COMMTX 0
#define IRQ_DA8XX_COMMRX 1
#define IRQ_DA8XX_NINT 2
#define IRQ_DA8XX_EVTOUT0 3
#define IRQ_DA8XX_EVTOUT1 4
#define IRQ_DA8XX_EVTOUT2 5
#define IRQ_DA8XX_EVTOUT3 6
#define IRQ_DA8XX_EVTOUT4 7
#define IRQ_DA8XX_EVTOUT5 8
#define IRQ_DA8XX_EVTOUT6 9
#define IRQ_DA8XX_EVTOUT7 10
#define IRQ_DA8XX_CCINT0 11
#define IRQ_DA8XX_CCERRINT 12
#define IRQ_DA8XX_TCERRINT0 13
#define IRQ_DA8XX_AEMIFINT 14
#define IRQ_DA8XX_I2CINT0 15
#define IRQ_DA8XX_MMCSDINT0 16
#define IRQ_DA8XX_MMCSDINT1 17
#define IRQ_DA8XX_ALLINT0 18
#define IRQ_DA8XX_RTC 19
#define IRQ_DA8XX_SPINT0 20
#define IRQ_DA8XX_TINT12_0 21
#define IRQ_DA8XX_TINT34_0 22
#define IRQ_DA8XX_TINT12_1 23
#define IRQ_DA8XX_TINT34_1 24
#define IRQ_DA8XX_UARTINT0 25
#define IRQ_DA8XX_KEYMGRINT 26
#define IRQ_DA8XX_SECINT 26
#define IRQ_DA8XX_SECKEYERR 26
#define IRQ_DA8XX_CHIPINT0 28
#define IRQ_DA8XX_CHIPINT1 29
#define IRQ_DA8XX_CHIPINT2 30
#define IRQ_DA8XX_CHIPINT3 31
#define IRQ_DA8XX_TCERRINT1 32
#define IRQ_DA8XX_C0_RX_THRESH_PULSE 33
#define IRQ_DA8XX_C0_RX_PULSE 34
#define IRQ_DA8XX_C0_TX_PULSE 35
#define IRQ_DA8XX_C0_MISC_PULSE 36
#define IRQ_DA8XX_C1_RX_THRESH_PULSE 37
#define IRQ_DA8XX_C1_RX_PULSE 38
#define IRQ_DA8XX_C1_TX_PULSE 39
#define IRQ_DA8XX_C1_MISC_PULSE 40
#define IRQ_DA8XX_MEMERR 41
#define IRQ_DA8XX_GPIO0 42
#define IRQ_DA8XX_GPIO1 43
#define IRQ_DA8XX_GPIO2 44
#define IRQ_DA8XX_GPIO3 45
#define IRQ_DA8XX_GPIO4 46
#define IRQ_DA8XX_GPIO5 47
#define IRQ_DA8XX_GPIO6 48
#define IRQ_DA8XX_GPIO7 49
#define IRQ_DA8XX_GPIO8 50
#define IRQ_DA8XX_I2CINT1 51
#define IRQ_DA8XX_LCDINT 52
#define IRQ_DA8XX_UARTINT1 53
#define IRQ_DA8XX_MCASPINT 54
#define IRQ_DA8XX_ALLINT1 55
#define IRQ_DA8XX_SPINT1 56
#define IRQ_DA8XX_UHPI_INT1 57
#define IRQ_DA8XX_USB_INT 58
#define IRQ_DA8XX_IRQN 59
#define IRQ_DA8XX_RWAKEUP 60
#define IRQ_DA8XX_UARTINT2 61
#define IRQ_DA8XX_DFTSSINT 62
#define IRQ_DA8XX_EHRPWM0 63
#define IRQ_DA8XX_EHRPWM0TZ 64
#define IRQ_DA8XX_EHRPWM1 65
#define IRQ_DA8XX_EHRPWM1TZ 66
#define IRQ_DA8XX_ECAP0 69
#define IRQ_DA8XX_ECAP1 70
#define IRQ_DA8XX_ECAP2 71
#define IRQ_DA8XX_ARMCLKSTOPREQ 90
/* DA830 specific interrupts */
#define IRQ_DA830_MPUERR 27
#define IRQ_DA830_IOPUERR 27
#define IRQ_DA830_BOOTCFGERR 27
#define IRQ_DA830_EHRPWM2 67
#define IRQ_DA830_EHRPWM2TZ 68
#define IRQ_DA830_EQEP0 72
#define IRQ_DA830_EQEP1 73
#define IRQ_DA830_T12CMPINT0_0 74
#define IRQ_DA830_T12CMPINT1_0 75
#define IRQ_DA830_T12CMPINT2_0 76
#define IRQ_DA830_T12CMPINT3_0 77
#define IRQ_DA830_T12CMPINT4_0 78
#define IRQ_DA830_T12CMPINT5_0 79
#define IRQ_DA830_T12CMPINT6_0 80
#define IRQ_DA830_T12CMPINT7_0 81
#define IRQ_DA830_T12CMPINT0_1 82
#define IRQ_DA830_T12CMPINT1_1 83
#define IRQ_DA830_T12CMPINT2_1 84
#define IRQ_DA830_T12CMPINT3_1 85
#define IRQ_DA830_T12CMPINT4_1 86
#define IRQ_DA830_T12CMPINT5_1 87
#define IRQ_DA830_T12CMPINT6_1 88
#define IRQ_DA830_T12CMPINT7_1 89
#define DA830_N_CP_INTC_IRQ 96
/* da830 currently has the most gpio pins (128) */
#define DAVINCI_N_GPIO 128
/* da830 currently has the most irqs so use DA830_N_CP_INTC_IRQ */
#define NR_IRQS (DA830_N_CP_INTC_IRQ + DAVINCI_N_GPIO)
#endif /* __ASM_ARCH_IRQS_H */
......@@ -20,9 +20,16 @@
/**************************************************************************
* Definitions
**************************************************************************/
#define DAVINCI_DDR_BASE 0x80000000
#define DAVINCI_DDR_BASE 0x80000000
#define DA8XX_DDR_BASE 0xc0000000
#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
#error Cannot enable DaVinci and DA8XX platforms concurrently
#elif defined(CONFIG_ARCH_DAVINCI_DA8XX)
#define PHYS_OFFSET DA8XX_DDR_BASE
#else
#define PHYS_OFFSET DAVINCI_DDR_BASE
#endif
/*
* Increase size of DMA-consistent memory region
......
......@@ -242,6 +242,410 @@ enum davinci_dm365_index {
DM365_EVT26_MMC0_RX,
};
enum da830_index {
DA830_GPIO7_14,
DA830_RTCK,
DA830_GPIO7_15,
DA830_EMU_0,
DA830_EMB_SDCKE,
DA830_EMB_CLK_GLUE,
DA830_EMB_CLK,
DA830_NEMB_CS_0,
DA830_NEMB_CAS,
DA830_NEMB_RAS,
DA830_NEMB_WE,
DA830_EMB_BA_1,
DA830_EMB_BA_0,
DA830_EMB_A_0,
DA830_EMB_A_1,
DA830_EMB_A_2,
DA830_EMB_A_3,
DA830_EMB_A_4,
DA830_EMB_A_5,
DA830_GPIO7_0,
DA830_GPIO7_1,
DA830_GPIO7_2,
DA830_GPIO7_3,
DA830_GPIO7_4,
DA830_GPIO7_5,
DA830_GPIO7_6,
DA830_GPIO7_7,
DA830_EMB_A_6,
DA830_EMB_A_7,
DA830_EMB_A_8,
DA830_EMB_A_9,
DA830_EMB_A_10,
DA830_EMB_A_11,
DA830_EMB_A_12,
DA830_EMB_D_31,
DA830_GPIO7_8,
DA830_GPIO7_9,
DA830_GPIO7_10,
DA830_GPIO7_11,
DA830_GPIO7_12,
DA830_GPIO7_13,
DA830_GPIO3_13,
DA830_EMB_D_30,
DA830_EMB_D_29,
DA830_EMB_D_28,
DA830_EMB_D_27,
DA830_EMB_D_26,
DA830_EMB_D_25,
DA830_EMB_D_24,
DA830_EMB_D_23,
DA830_EMB_D_22,
DA830_EMB_D_21,
DA830_EMB_D_20,
DA830_EMB_D_19,
DA830_EMB_D_18,
DA830_EMB_D_17,
DA830_EMB_D_16,
DA830_NEMB_WE_DQM_3,
DA830_NEMB_WE_DQM_2,
DA830_EMB_D_0,
DA830_EMB_D_1,
DA830_EMB_D_2,
DA830_EMB_D_3,
DA830_EMB_D_4,
DA830_EMB_D_5,
DA830_EMB_D_6,
DA830_GPIO6_0,
DA830_GPIO6_1,
DA830_GPIO6_2,
DA830_GPIO6_3,
DA830_GPIO6_4,
DA830_GPIO6_5,
DA830_GPIO6_6,
DA830_EMB_D_7,
DA830_EMB_D_8,
DA830_EMB_D_9,
DA830_EMB_D_10,
DA830_EMB_D_11,
DA830_EMB_D_12,
DA830_EMB_D_13,
DA830_EMB_D_14,
DA830_GPIO6_7,
DA830_GPIO6_8,
DA830_GPIO6_9,
DA830_GPIO6_10,
DA830_GPIO6_11,
DA830_GPIO6_12,
DA830_GPIO6_13,
DA830_GPIO6_14,
DA830_EMB_D_15,
DA830_NEMB_WE_DQM_1,
DA830_NEMB_WE_DQM_0,
DA830_SPI0_SOMI_0,
DA830_SPI0_SIMO_0,
DA830_SPI0_CLK,
DA830_NSPI0_ENA,
DA830_NSPI0_SCS_0,
DA830_EQEP0I,
DA830_EQEP0S,
DA830_EQEP1I,
DA830_NUART0_CTS,
DA830_NUART0_RTS,
DA830_EQEP0A,
DA830_EQEP0B,
DA830_GPIO6_15,
DA830_GPIO5_14,
DA830_GPIO5_15,
DA830_GPIO5_0,
DA830_GPIO5_1,
DA830_GPIO5_2,
DA830_GPIO5_3,
DA830_GPIO5_4,
DA830_SPI1_SOMI_0,
DA830_SPI1_SIMO_0,
DA830_SPI1_CLK,
DA830_UART0_RXD,
DA830_UART0_TXD,
DA830_AXR1_10,
DA830_AXR1_11,
DA830_NSPI1_ENA,
DA830_I2C1_SCL,
DA830_I2C1_SDA,
DA830_EQEP1S,
DA830_I2C0_SDA,
DA830_I2C0_SCL,
DA830_UART2_RXD,
DA830_TM64P0_IN12,
DA830_TM64P0_OUT12,
DA830_GPIO5_5,
DA830_GPIO5_6,
DA830_GPIO5_7,
DA830_GPIO5_8,
DA830_GPIO5_9,
DA830_GPIO5_10,
DA830_GPIO5_11,
DA830_GPIO5_12,
DA830_NSPI1_SCS_0,
DA830_USB0_DRVVBUS,
DA830_AHCLKX0,
DA830_ACLKX0,
DA830_AFSX0,
DA830_AHCLKR0,
DA830_ACLKR0,
DA830_AFSR0,
DA830_UART2_TXD,
DA830_AHCLKX2,
DA830_ECAP0_APWM0,
DA830_RMII_MHZ_50_CLK,
DA830_ECAP1_APWM1,
DA830_USB_REFCLKIN,
DA830_GPIO5_13,
DA830_GPIO4_15,
DA830_GPIO2_11,
DA830_GPIO2_12,
DA830_GPIO2_13,
DA830_GPIO2_14,
DA830_GPIO2_15,
DA830_GPIO3_12,
DA830_AMUTE0,
DA830_AXR0_0,
DA830_AXR0_1,
DA830_AXR0_2,
DA830_AXR0_3,
DA830_AXR0_4,
DA830_AXR0_5,
DA830_AXR0_6,
DA830_RMII_TXD_0,
DA830_RMII_TXD_1,
DA830_RMII_TXEN,
DA830_RMII_CRS_DV,
DA830_RMII_RXD_0,
DA830_RMII_RXD_1,
DA830_RMII_RXER,
DA830_AFSR2,
DA830_ACLKX2,
DA830_AXR2_3,
DA830_AXR2_2,
DA830_AXR2_1,
DA830_AFSX2,
DA830_ACLKR2,
DA830_NRESETOUT,
DA830_GPIO3_0,
DA830_GPIO3_1,
DA830_GPIO3_2,
DA830_GPIO3_3,
DA830_GPIO3_4,
DA830_GPIO3_5,
DA830_GPIO3_6,
DA830_AXR0_7,
DA830_AXR0_8,
DA830_UART1_RXD,
DA830_UART1_TXD,
DA830_AXR0_11,
DA830_AHCLKX1,
DA830_ACLKX1,
DA830_AFSX1,
DA830_MDIO_CLK,
DA830_MDIO_D,
DA830_AXR0_9,
DA830_AXR0_10,
DA830_EPWM0B,
DA830_EPWM0A,
DA830_EPWMSYNCI,
DA830_AXR2_0,
DA830_EPWMSYNC0,
DA830_GPIO3_7,
DA830_GPIO3_8,
DA830_GPIO3_9,
DA830_GPIO3_10,
DA830_GPIO3_11,
DA830_GPIO3_14,
DA830_GPIO3_15,
DA830_GPIO4_10,
DA830_AHCLKR1,
DA830_ACLKR1,
DA830_AFSR1,
DA830_AMUTE1,
DA830_AXR1_0,
DA830_AXR1_1,
DA830_AXR1_2,
DA830_AXR1_3,
DA830_ECAP2_APWM2,
DA830_EHRPWMGLUETZ,
DA830_EQEP1A,
DA830_GPIO4_11,
DA830_GPIO4_12,
DA830_GPIO4_13,
DA830_GPIO4_14,
DA830_GPIO4_0,
DA830_GPIO4_1,
DA830_GPIO4_2,
DA830_GPIO4_3,
DA830_AXR1_4,
DA830_AXR1_5,
DA830_AXR1_6,
DA830_AXR1_7,
DA830_AXR1_8,
DA830_AXR1_9,
DA830_EMA_D_0,
DA830_EMA_D_1,
DA830_EQEP1B,
DA830_EPWM2B,
DA830_EPWM2A,
DA830_EPWM1B,
DA830_EPWM1A,
DA830_MMCSD_DAT_0,
DA830_MMCSD_DAT_1,
DA830_UHPI_HD_0,
DA830_UHPI_HD_1,
DA830_GPIO4_4,
DA830_GPIO4_5,
DA830_GPIO4_6,
DA830_GPIO4_7,
DA830_GPIO4_8,
DA830_GPIO4_9,
DA830_GPIO0_0,
DA830_GPIO0_1,
DA830_EMA_D_2,
DA830_EMA_D_3,
DA830_EMA_D_4,
DA830_EMA_D_5,
DA830_EMA_D_6,
DA830_EMA_D_7,
DA830_EMA_D_8,
DA830_EMA_D_9,
DA830_MMCSD_DAT_2,
DA830_MMCSD_DAT_3,
DA830_MMCSD_DAT_4,
DA830_MMCSD_DAT_5,
DA830_MMCSD_DAT_6,
DA830_MMCSD_DAT_7,
DA830_UHPI_HD_8,
DA830_UHPI_HD_9,
DA830_UHPI_HD_2,
DA830_UHPI_HD_3,
DA830_UHPI_HD_4,
DA830_UHPI_HD_5,
DA830_UHPI_HD_6,
DA830_UHPI_HD_7,
DA830_LCD_D_8,
DA830_LCD_D_9,
DA830_GPIO0_2,
DA830_GPIO0_3,
DA830_GPIO0_4,
DA830_GPIO0_5,
DA830_GPIO0_6,
DA830_GPIO0_7,
DA830_GPIO0_8,
DA830_GPIO0_9,
DA830_EMA_D_10,
DA830_EMA_D_11,
DA830_EMA_D_12,
DA830_EMA_D_13,
DA830_EMA_D_14,
DA830_EMA_D_15,
DA830_EMA_A_0,
DA830_EMA_A_1,
DA830_UHPI_HD_10,
DA830_UHPI_HD_11,
DA830_UHPI_HD_12,
DA830_UHPI_HD_13,
DA830_UHPI_HD_14,
DA830_UHPI_HD_15,
DA830_LCD_D_7,
DA830_MMCSD_CLK,
DA830_LCD_D_10,
DA830_LCD_D_11,
DA830_LCD_D_12,
DA830_LCD_D_13,
DA830_LCD_D_14,
DA830_LCD_D_15,
DA830_UHPI_HCNTL0,
DA830_GPIO0_10,
DA830_GPIO0_11,
DA830_GPIO0_12,
DA830_GPIO0_13,
DA830_GPIO0_14,
DA830_GPIO0_15,
DA830_GPIO1_0,
DA830_GPIO1_1,
DA830_EMA_A_2,
DA830_EMA_A_3,
DA830_EMA_A_4,
DA830_EMA_A_5,
DA830_EMA_A_6,
DA830_EMA_A_7,
DA830_EMA_A_8,
DA830_EMA_A_9,
DA830_MMCSD_CMD,
DA830_LCD_D_6,
DA830_LCD_D_3,
DA830_LCD_D_2,
DA830_LCD_D_1,
DA830_LCD_D_0,
DA830_LCD_PCLK,
DA830_LCD_HSYNC,
DA830_UHPI_HCNTL1,
DA830_GPIO1_2,
DA830_GPIO1_3,
DA830_GPIO1_4,
DA830_GPIO1_5,
DA830_GPIO1_6,
DA830_GPIO1_7,
DA830_GPIO1_8,
DA830_GPIO1_9,
DA830_EMA_A_10,
DA830_EMA_A_11,
DA830_EMA_A_12,
DA830_EMA_BA_1,
DA830_EMA_BA_0,
DA830_EMA_CLK,
DA830_EMA_SDCKE,
DA830_NEMA_CAS,
DA830_LCD_VSYNC,
DA830_NLCD_AC_ENB_CS,
DA830_LCD_MCLK,
DA830_LCD_D_5,
DA830_LCD_D_4,
DA830_OBSCLK,
DA830_NEMA_CS_4,
DA830_UHPI_HHWIL,
DA830_AHCLKR2,
DA830_GPIO1_10,
DA830_GPIO1_11,
DA830_GPIO1_12,
DA830_GPIO1_13,
DA830_GPIO1_14,
DA830_GPIO1_15,
DA830_GPIO2_0,
DA830_GPIO2_1,
DA830_NEMA_RAS,
DA830_NEMA_WE,
DA830_NEMA_CS_0,
DA830_NEMA_CS_2,
DA830_NEMA_CS_3,
DA830_NEMA_OE,
DA830_NEMA_WE_DQM_1,
DA830_NEMA_WE_DQM_0,
DA830_NEMA_CS_5,
DA830_UHPI_HRNW,
DA830_NUHPI_HAS,
DA830_NUHPI_HCS,
DA830_NUHPI_HDS1,
DA830_NUHPI_HDS2,
DA830_NUHPI_HINT,
DA830_AXR0_12,
DA830_AMUTE2,
DA830_AXR0_13,
DA830_AXR0_14,
DA830_AXR0_15,
DA830_GPIO2_2,
DA830_GPIO2_3,
DA830_GPIO2_4,
DA830_GPIO2_5,
DA830_GPIO2_6,
DA830_GPIO2_7,
DA830_GPIO2_8,
DA830_GPIO2_9,
DA830_EMA_WAIT_0,
DA830_NUHPI_HRDY,
DA830_GPIO2_10,
};
#ifdef CONFIG_DAVINCI_MUX
/* setup pin muxing */
extern int davinci_cfg_reg(unsigned long reg_cfg);
......
......@@ -136,6 +136,47 @@
#define DM646X_LPSC_TIMER1 35
#define DM646X_LPSC_ARM_INTC 45
/* PSC0 defines */
#define DA8XX_LPSC0_TPCC 0
#define DA8XX_LPSC0_TPTC0 1
#define DA8XX_LPSC0_TPTC1 2
#define DA8XX_LPSC0_EMIF25 3
#define DA8XX_LPSC0_SPI0 4
#define DA8XX_LPSC0_MMC_SD 5
#define DA8XX_LPSC0_AINTC 6
#define DA8XX_LPSC0_ARM_RAM_ROM 7
#define DA8XX_LPSC0_SECU_MGR 8
#define DA8XX_LPSC0_UART0 9
#define DA8XX_LPSC0_SCR0_SS 10
#define DA8XX_LPSC0_SCR1_SS 11
#define DA8XX_LPSC0_SCR2_SS 12
#define DA8XX_LPSC0_DMAX 13
#define DA8XX_LPSC0_ARM 14
#define DA8XX_LPSC0_GEM 15
/* PSC1 defines */
#define DA8XX_LPSC1_USB20 1
#define DA8XX_LPSC1_USB11 2
#define DA8XX_LPSC1_GPIO 3
#define DA8XX_LPSC1_UHPI 4
#define DA8XX_LPSC1_CPGMAC 5
#define DA8XX_LPSC1_EMIF3C 6
#define DA8XX_LPSC1_McASP0 7
#define DA830_LPSC1_McASP1 8
#define DA830_LPSC1_McASP2 9
#define DA8XX_LPSC1_SPI1 10
#define DA8XX_LPSC1_I2C 11
#define DA8XX_LPSC1_UART1 12
#define DA8XX_LPSC1_UART2 13
#define DA8XX_LPSC1_LCDC 16
#define DA8XX_LPSC1_PWM 17
#define DA8XX_LPSC1_ECAP 20
#define DA830_LPSC1_EQEP 21
#define DA8XX_LPSC1_SCR_P0_SS 24
#define DA8XX_LPSC1_SCR_P1_SS 25
#define DA8XX_LPSC1_CR_P3_SS 26
#define DA8XX_LPSC1_L3_CBA_RAM 31
extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
unsigned int id, char enable);
......
......@@ -18,6 +18,10 @@
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
#define DA8XX_UART0_BASE (IO_PHYS + 0x042000)
#define DA8XX_UART1_BASE (IO_PHYS + 0x10c000)
#define DA8XX_UART2_BASE (IO_PHYS + 0x10d000)
/* DaVinci UART register offsets */
#define UART_DAVINCI_PWREMU 0x0c
#define UART_DM646X_SCR 0x10
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment