Commit 5890a3ca authored by Rafał Miłecki's avatar Rafał Miłecki Committed by John W. Linville

ssb: pci: update PCIe workarounds

Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 6e914101
......@@ -460,16 +460,23 @@ static void ssb_pcicore_pci_setup_workarounds(struct ssb_pcicore *pc)
static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc)
{
struct ssb_device *pdev = pc->dev;
u32 tmp;
u8 rev = pc->dev->id.revision;
if ((pdev->id.revision == 0) || (pdev->id.revision == 1)) {
if (rev == 0 || rev == 1) {
/* TLP Workaround register. */
tmp = ssb_pcie_read(pc, 0x4);
tmp |= 0x8;
ssb_pcie_write(pc, 0x4, tmp);
}
if (pdev->id.revision == 0) {
if (rev == 1) {
/* DLLP Link Control register. */
tmp = ssb_pcie_read(pc, 0x100);
tmp |= 0x40;
ssb_pcie_write(pc, 0x100, tmp);
}
if (rev == 0) {
const u8 serdes_rx_device = 0x1F;
ssb_pcie_mdio_write(pc, serdes_rx_device,
......@@ -478,11 +485,20 @@ static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc)
6 /* CDR */, 0x0100);
ssb_pcie_mdio_write(pc, serdes_rx_device,
7 /* CDR BW */, 0x1466);
} else if (pdev->id.revision == 1) {
/* DLLP Link Control register. */
tmp = ssb_pcie_read(pc, 0x100);
tmp |= 0x40;
ssb_pcie_write(pc, 0x100, tmp);
} else if (rev == 3 || rev == 4 || rev == 5) {
/* TODO: DLLP Power Management Threshold */
ssb_pcicore_serdes_workaround(pc);
/* TODO: ASPM */
} else if (rev == 7) {
/* TODO: No PLL down */
}
if (rev >= 6) {
/* Miscellaneous Configuration Fixup */
tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(5));
if (!(tmp & 0x8000))
pcicore_write16(pc, SSB_PCICORE_SPROM(5),
tmp | 0x8000);
}
}
......@@ -513,7 +529,10 @@ void ssb_pcicore_init(struct ssb_pcicore *pc)
if (!pc->hostmode)
ssb_pcicore_init_clientmode(pc);
/* Additional always once-executed workarounds */
ssb_pcicore_serdes_workaround(pc);
/* TODO: ASPM */
/* TODO: Clock Request Update */
}
static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment