Commit 5905bbfa authored by Sylwester Nawrocki's avatar Sylwester Nawrocki Committed by Kukjin Kim

ARM: S5PV210: Add resource definitions for MIPI CSIS

Naming changed for consistency with s5pv310 where there are two instances
of the device.
Signed-off-by: default avatarSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent 9b580cdb
......@@ -65,7 +65,7 @@
#define IRQ_HSMMC0 S5P_IRQ_VIC1(26)
#define IRQ_HSMMC1 S5P_IRQ_VIC1(27)
#define IRQ_HSMMC2 S5P_IRQ_VIC1(28)
#define IRQ_MIPICSI S5P_IRQ_VIC1(29)
#define IRQ_MIPI_CSIS S5P_IRQ_VIC1(29)
#define IRQ_MIPIDSI S5P_IRQ_VIC1(30)
#define IRQ_ONENAND_AUDI S5P_IRQ_VIC1(31)
......@@ -132,5 +132,6 @@
#define IRQ_LCD_FIFO IRQ_LCD0
#define IRQ_LCD_VSYNC IRQ_LCD1
#define IRQ_LCD_SYSTEM IRQ_LCD2
#define IRQ_MIPI_CSIS0 IRQ_MIPI_CSIS
#endif /* ASM_ARCH_IRQS_H */
......@@ -110,6 +110,8 @@
#define S5PV210_PA_DMC0 (0xF0000000)
#define S5PV210_PA_DMC1 (0xF1400000)
#define S5PV210_PA_MIPI_CSIS 0xFA600000
/* compatibiltiy defines. */
#define S3C_PA_UART S5PV210_PA_UART
#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0)
......@@ -126,6 +128,7 @@
#define S5P_PA_FIMC0 S5PV210_PA_FIMC0
#define S5P_PA_FIMC1 S5PV210_PA_FIMC1
#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS
#define SAMSUNG_PA_ADC S5PV210_PA_ADC
#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON
......
......@@ -161,7 +161,7 @@
#define S5P_MDNIE_SEL S5P_CLKREG(0x7008)
#define S5P_MIPI_PHY_CON0 S5P_CLKREG(0x7200)
#define S5P_MIPI_PHY_CON1 S5P_CLKREG(0x7204)
#define S5P_MIPI_CONTROL S5P_CLKREG(0xE814)
#define S5P_MIPI_DPHY_CONTROL S5P_CLKREG(0xE814)
#define S5P_IDLE_CFG_TL_MASK (3 << 30)
#define S5P_IDLE_CFG_TM_MASK (3 << 28)
......@@ -195,9 +195,6 @@
#define S5P_OTHERS_RET_UART (1 << 28)
#define S5P_OTHERS_USB_SIG_MASK (1 << 16)
/* MIPI */
#define S5P_MIPI_DPHY_EN (3)
/* S5P_DAC_CONTROL */
#define S5P_DAC_ENABLE (1)
#define S5P_DAC_DISABLE (0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment